ANSI American Society of Safety Engineers A10.34-2001 Protection of the Public on or Adjacent to Construction Sites.pdf

1、Printed in U.S.A.A SS EAMERICAN SOCIETY OFSAFETY ENGINEERSAMERICAN NATIONAL STANDARDANSI/ASSE A10.34-2001 (R2012)ANSI/ASSE A10.34-2001 (R2012) Protection of the Public onor Adjacent to Construction SitesAmerican National Standardfor Construction and Demolition OperationsANSI/ASSE A10.34-2001 (R2012)

2、The information and materials contained in this publication have been developed from sources believed to be reliable. However, the American Society of Safety Engineers (ASSE) as secretariat of the ANSI accredited A10 Committee or individual committee members accept no legal responsibility for the co

3、rrectness or completeness of this material or its application to specific factual situations. By publication of this standard, ASSE or the A10 Committee does not ensure that adherence to these recommendations will protect the safety or health of any persons, or preserve property. ANSI ANSI/ASSE A10.

4、34-2001 (R2012) American National Standard Construction and Demolition Operations Protection of the Public on or Adjacent to Construction Sites Secretariat American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 Approved July 3, 2012 American National Standards

5、Institute, Inc. Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, su

6、bstantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution

7、. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he/she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The Ame

8、rican National Standards Institute does not develop standards and will in no circumstance give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National S

9、tandards Institute. Requests for interpretation should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institut

10、e require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published September 2012 by American Society of Safe

11、ty Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 (847) 699-2929 www.asse.org Copyright 2012 by American Society of Safety Engineers All Rights Reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior w

12、ritten permission of the publisher. Printed in the United States of America American National Standard Foreword (This Foreword is not a part of American National Standard A10.34-2001 (R2012).) This standard is one of a series of safety standards that have been formulated by the Accredited Standards

13、Committee on Safety in Construction and Demolition Operations, A10. It is expected that the standards in the A10 series will find a major application in industry, serving as a guide to contractors, labor, and equipment manufacturers. For the convenience of users, a list of existing and proposed stan

14、dards in the A10 series for Safety Requirements in Construction and Demolition Operations follows. A10.1 Pre-Project Workplace Floor, Wall Stairs & Guardrails Systems A1264.2 Standard for the Provision of Slip Resistance on Walking/Working Surfaces A1264.3 Technical Report: Using Variable Angle Trib

15、ometers (VAT) for Measurement of the Slip Resistance of Walkway SurfacesADDITIONAL STANDARDS Z15.1 Safe Practices for Motor Vehicle Operations Z117.1 Safety Requirements for Confined Spaces Z244.1 Control of Hazardous EnergyLockout/Tagout & Alternative Methods Z390.1 Accepted Practices for Hydrogen

16、Sulfide Safety Training Programs Z490.1 Criteria for Accepted Practices in Safety, Health, & Environmental Training Z590.2 Criteria for Establishing the Scope & Functions of the Professional Safety Position Z590.3 Prevention through Design: Guidelines for Addressing Occupational Hazards & Risks in D

17、esign & Redesign Processes ANSI/ASSE/ISO Risk Management Standards PackageStandards are available in hard copy or electronic format.For a full list of standards and historical standards that ASSE has to offer, please visit our website atwww.asse.org or contact customer service at 847.699.2929 or customerserviceasse.org.Page Intentionally Left Blank Page Intentionally Left Blank