1、ASSE/IAPMO/ANSI Series 8000-2010(R2015) ASSE Board Approved: July 2015 ANSI Approved: September 2015 An American National Standard Self-Contained Breathing Apparatus (SCBA) Replenishment Systems Professional Qualifications Standard ASSE InternationalASSE Series 8000-2010(R2015) Professional Qualific
2、ations Standard i Issued: September 2015 Copyright Information iii Foreword v PQ Standards Committee . vi Series 8000 Working Group . vii Standard #8001 1 Reference and Industry Standards and Codes Standard #8005 3 Self-Contained Breathing Apparatus (SCBA) Replenishment Systems General Information S
3、tandard #8010 5 Self-Contained Breathing Apparatus (SCBA) Replenishment Systems Installers Standard #8020 9 Self-Contained Breathing Apparatus (SCBA) Replenishment Systems Inspectors Self-Contained Breathing Apparatus (SCBA) Replenishment Systems Professional Qualifications Standard Standard #8030 1
4、3 Self-Contained Breathing Apparatus (SCBA) Replenishment Systems Verifiers Appendix A 17 Vocabulary and Definitions Appendix B . 19 Installation Requirements Appendix C . 27 Schematics Appendix D 29 Field Verification/T esting Procedures for Verifiers Appendix E . 35 High Rise Protocol Appendix F .
5、 39 Air SupplyTABl E o F Con TEn TSii ASSE Series 8000-2010(R2015) Professional Qualifications Standard Issued: September 2015ASSE Series 8000-2010(R2015) Professional Qualifications Standard iii Issued: September 2015 Self-Contained Breathing Apparatus (SCBA) Replenishment Systems Professional Qual
6、ifications Standard ASSE International Mokena, Illinois Copyright 2015, 2010 All rights reserved. Co PYRIGHT In Fo RMATIon Neither this standard, nor any portion thereof, may be reproduced without the written consent of ASSE International. Organizations wishing to adopt or list any ASSE Standard sho
7、uld print the ASSE Standard Number on the cover page first and in equal or larger type to that of the adopting or listing organization. iv ASSE Series 8000-2010(R2015) Professional Qualifications Standard Issued: September 2015ASSE Series 8000-2010(R2015) Professional Qualifications Standard v Issue
8、d: September 2015 Self-Contained Breathing Apparatus (SCBA) Replenishment Systems Professional Qualifications Standard Fo REWo RD This foreword shall not be considered a part of the standard; however, it is offered to provide background information. This document contains the uniform minimum require
9、ments for qualified installers, inspectors and verifiers of Self- Contained Breathing Apparatus (SCBA) Replenishment Systems. The commitment of ASSE International to the safety of all Americans, and in particular Americas firefighters, is aptly demonstrated in the creation of the Professional Qualif
10、ication Standard for the Installer, Inspector and Verifier of Self Contained Breathing Apparatus Replenishment Systems. The idea of supporting firefighting operations by installing a breathing air refilling system in high rise structures is an innovative notion. The idea of certifying those journeym
11、en who install these life safety systems is as important as training those who will use it. Working with Americas fire service, ASSE has developed a professional qualification that ensures these life safety systems will be installed and tested to the highest standards known. Our firefighters deserve
12、 nothing less. We would like to thank, in particular, the City of Portland, Oregon, Bureau of Emergency Services, and Tualatin Valley Fire and Rescue. These agencies have been instrumental in the development of this program.vi ASSE Series 8000-2010(R2015) Professional Qualifications Standard Issued:
13、 September 2015 Donald Summers Jr., ChairpersonUA Local 562St. Louis, MO Kenneth Borski UA Local 68 JACHouston, TX Philip CampbellUnited AssociationAnnapolis, MD l aurence T . ColemanUA Local 597Mokena, IL Dana ColomboNational Inspection T esting & Certification (NITC)Metairie, LA Robert l . CrossUA
14、 Local 68 JACHouston, TX Edward l yczkoCleveland Clinic - RetireeCleveland, OH Matthew Marciniak (non-voting)International Association of Plumbing and Mechanical Officials (IAPMO)Milwaukee, WI Douglas MarianUA Local 78Los Angeles, CA Barry Pines, CPDC & R PlumbingShelby T ownship, MI Richard J. Pros
15、palProspal Consulting Services Inc.Brunswick, OH Daniel RademacherPlumbing Code & Design ConsultingButte, MT Philip RoachMazzettiPortland, OR Kenneth SchneiderSprinkler Fitters UA Local 268 JATCSt Louis, MO Jason ShankUA Local 55Cleveland, OH Jaime ValdiviaNational Inspection T esting & Certificatio
16、n (NITC)Los Angeles, CA Marianne Waickman (non-voting) ASSE InternationalMokena, IL Self-Contained Breathing Apparatus (SCBA) Replenishment Systems Professional Qualifications Standard 2015 ASSE PQ STAn DARDS Co MMITTEEASSE Series 8000-2010(R2015) Professional Qualifications Standard vii Issued: Sep
17、tember 2015 Ronald J. Murray, ChairmanUA Local 290Portland, Oregon Sean ClearyIAPMOScranton, Pennsylvania Ron GeorgeRon George Design & Consulting ServicesMonroe, Michigan Gregory Maus (posthumously) Pipe Fitters Training Center Local Union 597Mokena, Illinois Self-Contained Breathing Apparatus (SCB
18、A) Replenishment Systems Professional Qualifications Standard Richard J. Prospal Prospal Consulting Services, Inc.Brunswick, Ohio Philip RoachSolarc Architecture and Engineering, Inc.Portland, Oregon Steve SilberUA Local 342 JATCConcord, California Marianne C. WaickmanASSE Westlake, Ohio 2010 ASSE S
19、ERIES 8000 Wo RKIn G GRo UPviii ASSE Series 8000-2010(R2015) Professional Qualifications Standard Issued: September 2015ASSE Series 8000-2010(R2015) Professional Qualifications Standard 1 Issued: September 2015 01-1.1 Reference and Industry Standards and Codes The following documents form a part of
20、this Standard to the extent specified herein. Unless otherwise indicated, the latest edition shall apply. 01-1.1.1 ASME BPVC- 2010, Boiler Pressure and Vessel Code (BPVC) 01-1.1.2 ASME IX-2008, Boiler and Pressure Vessel Code, Section IX: Welding and Braising Qualifications 01-1.1.2 ASME B31.9-2008,
21、 Building Service Piping 2010 ASME Boiler and Pressure Vessel Code, Section IX: Welding and Brazing Qualifications 01-1.1.3 ASTM A269 - 2010, Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service 01-1.1.4 ASTM A479-2010, Standard Specification for Stain
22、less Bars and Shapers for use in Boilers and other Pressure Vessels 01-1.1.5 CGA G-4.1-2009, Cleaning Equipment for Oxygen Service 01-1.1.6 CGA S1.1-2007, Pressure Relief Device Standards-Part 1-Cylinders for Compressed Gases 01-1.1.7 CGA S1.2-2009, Pressure Relief Device Standards-Part 2-Portable C
23、ontainers for Compressed Gases 01-1.1.8 CGA S1.3-2008, Pressure Relief Device Standards-Part 3-Stationary Storage Containers for Compressed Gases ASSE SERIES 8000 STANDARD #8001 01-1.1.9 CGA V1-2009, Standard for Compressed Gas Cylinder Valve Outlet and Inlet Connections 01-1.1.10 IAPMO UPC 2009, Un
24、iform Plumbing Code, Section 314, Hangers and Supports 01-1.1.11 IAPMO UPC 2009, Uniform Plumbing Code, Ap- pendix F, Firefighter Breathing Air Replenishment Systems 01-1.1.12 ISO 9001-2008, Quality Management Systems Requirements 01-1.1.13 MIL-L-25567D-1993, Leak Detection Compound Oxygen Systems 0
25、1-1.1.14 MSS SP 58-2009, Pipe Hangers and Supports Materials, Design, Manufacture, Selection, Application, and Installation 01-1.1.14 MSS SP 69-2003, Pipe Hangers and Supports - Selection and Application Pipe Hangers and Supports - Materials, Design, Manufacture, Selection, Application, and Installa
26、tion 01-1.1.15 NFPA 70-2008, National Electric Code 01-1.1.16 NFPA 1852-2008, Standard on Selection, Care and Maintenance of Open-Circuit Self-Contained Breathing Apparatus (SCBA) 01-1.1.17 NFPA 1901-2009, Standard for Automotive Fire Apparatus 01-1.1.17 NFPA 1981-2007, Standard on Open Circuit Self
27、 Contained Breathing Apparatus (SCBA) for Emergency Services 01-1.1.18 NFPA 1989-2008, Standard on Breathing Air Quality References 2 ASSE Series 8000-2010(R2015) Professional Qualifications Standard Issued: September 2015 for Emergency Service Respiratory Protection 01-1.1.19 NFPA 5000-2009, Buildi
28、ng Construction and Safety Code 01-1.1.20 OSHA 1910.134, Standard for Respiratory Protection 01-1.2 Abbreviations and Standards Development o rganizations ASME The American Society of Mechanical Engineering, Three Park Avenue, New York, NY 10016 ASTM American Society of Testing and Materials, 100 Ba
29、rr Harbor Drive, West Conshohocken, PA 19428- 2959 CGA Compressed Gas Association, 4221 Walney Road, 5th floor, Chantilly, VA 20151-2923 IAPMO International Association of Plumbing and Mechanical Officials, 5001 E. Philadelphia Street, Ontario, CA 91761 ISO International Organization for Standardiza
30、tion, 1 Rue de Varebre, Casa Postale 56, CH-1211 Geneva 20, Switzerland MIL-L Military Specifications for Lubricants MSS Manufacturers Standardization Society of the Valve and Fittings Industry, 127 Park St. NE, Vienna, VA 22180-4602 NFPA National Fire Protection Association, P .O. Box 9101, 1 Batte
31、rymarch Park, Quincy, MA 02269-9191 OSHA Occupational Safety & Health Administration, US Dept of Labor, 200 Constitution Ave NW, Washington DC 20210ASSE Series 8000-2010(R2015) Professional Qualifications Standard 3 Issued: September 2015 5-1.1 Scope This standard provides general knowledge of Self
32、Contained Breathing Apparatus (SCBA) Replenishment Systems for the purpose of providing continuing education. Eligible individuals include any person with an interest in Self Contained Breathing Apparatus (SCBA) Replenishment Systems and equipment. This standard does not apply to those who work with
33、 SCBA Replenishment Systems as an Installer per ASSE Standard 8010, an Inspector per ASSE Standard 8020, or a V erifier per ASSE Standard 8030. 5-1.2 Purpose The purpose of this standard is to provide minimum criteria, identified by an industry consensus, for Self Contained Breathing Apparatus (SCBA
34、) Replenishment Systems, to assure compliance with the referenced standards in Section 5-1.4. 5-1.3 limitations Compliance with this standard shall not constitute compliance with the requirements for a SCBA Replenishment Systems Installer per ASSE Standard 8010, a SCBA Replenishment Systems Inspecto
35、r per ASSE Standard 8020, or a SCBA Replenishment Systems Verifier per ASSE Standard 8030. 5-1.4 Reference and Industry Standards The Reference and Industry Standards listed in ASSE Standard 8001 are a part of this standard. 5-2.1 General Knowledge 5-2.1.1 The individual shall be able to identify an
36、d show knowledge of the applicable laws, codes, rules, listing agencies and regulations from the federal, state, and local levels pertaining to SCBA Replenishment Systems. ASSE SERIES 8000 STANDARD #8005 General Information 5-2.1.2 The individual shall be able to identify and describe the basic conc
37、epts pertaining to: a. Absolute pressure b. Alarm settings c. Approved joining methods d. Atmospheric pressure e. Breathing air f. Cascade refill station g. Exterior fire department connection panel and enclosure h. Fire Department Standard Operating Procedures (SOP) for SCBA filling i. Fire Departm
38、ent Standard Operating Procedures (SOP) for high rise fires j. Flow schematic k. Gage pressure 1. Pressure relief valve m. SCBA components n. SCBA operation o. SCBA charging station p. Valves including source valves, riser valves, service/control valves and cross-over valves 5-2.2 Product Performanc
39、e Knowledge 5-2.2.1 The individual shall be able to list the parts and identify the major components of SCBA Replenishment Systems and equipment. 5-2.2.2 The individual shall be able to describe the proper application of SCBA Replenishment Systems and their limitations with respect to: a. SCBA reple
40、nishment b. Fill station placement 5-2.2.3 The individual shall be able to identify and describe the operating principles and performance characteristics of the SCBA Replenishment Systems and identify the following components: a. Air inlet b. Alarm systems c. Containment systems d. Operation of air
41、supplies e. Pressure regulating valves f. Pressure relief valves4 ASSE Series 8000-2010(R2015) Professional Qualifications Standard Issued: September 2015 g. SCBA Replenishment Systems air compressors and accessories h. SCBA Replenishment Systems air control panels i. SCBA Replenishment Systems mani
42、folds j. Shut-off valves 5-2.3 Product Installation Knowledge 5-2.3.1 The individual shall be able to describe the proper installation requirements for the SCBA Replenishment Systems relating to: a. Applicable codes, specifications and standards b. Local jurisdiction requirements c. Manufacturer rec
43、ommendations d. Physical location and accessibility 5-2.3.2 The individual shall be able to identify and describe the problems resulting from the improper installation of SCBA Replenishment Systems. 5-2.4 System and System Component T esting Knowledge 5-2.4.1 The individual shall be able to describe
44、 test requirements associated with the following components: a. Air supplies b. Alarm systems c. Blow-down pipe d. Exterior fire department connection panel and enclosure e. Low air pressure alarm f. Pressure monitoring switch g. Pressure regulating valves h. Pressure relief valves i. Purge procedur
45、e j. Purity testing procedure k. SCBA Replenishment Systems air compressors and accessories l. SCBA Replenishment Systems control panels m. SCBA Replenishment Systems inlets n. Shut-off valves o. T runnion style three way ball valve 5-2.4.2 The individual shall be able to identify and describe proce
46、dures for the use of the following: a. Exterior fire department connection panel and enclosure b. By-pass operation c. Fill station d. Pressure gauge e. Pressure monitoring switch 5-3.1 Terminology The individual shall be able to demonstrate a basic working knowledge of all terminology listed in the
47、 ASSE Standard 8000 and its appendixes. 5-4.1 Certification 5-4.1.1 Certification shall be through a recognized third party certification agency. 5-4.1.2 Certification shall include the successful completion of a minimum 8-hour training course including a written examination covering all facets of A
48、SSE Standard 8000.ASSE Series 8000-2010(R2015) Professional Qualifications Standard 5 Issued: September 2015 10-1.1 Scope This standard applies to any individual who installs Self Contained Breathing Apparatus (SCBA) Replenishment Systems. Installers include anyone who works on or installs piping or
49、 components, including welders. SCBA Replenishment Systems and equipment covered in this standard include structures within the scope of the IAPMO UPC 2009, Uniform Plumbing Code, Appendix F , Firefighter Breathing Air Replenishment Systems 10-1.2 Purpose The purpose of this standard is to provide minimum performance criteria, identified by industry consensus, for SCBA Replenishment Systems Installers to assure compliance with the provisions of this standard and the referenced standards in Section 10-1.4. 10-1.3 l imitations for a SCBA Replenishment Systems Installer Compliance wi
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1