ANSI ANSLG C81.63-2007 Gauges for Electric Lamp Bases and Lampholders《电灯基座和灯座量规》.pdf

1、 ANSI_ANSLG C81.63-2007 Revision of ANSI C81.63-2006 American National Standard Gauges for Electric Lamp Bases and Lampholders Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS

2、-,-,-Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI_ANSLG C81.632007 Revision of ANSI_ANSLG C81.63-2006 Copyright 2007 by American National Standard Lighting Group

3、Page 1 of 132 American National Standard Approved: November 6, 2007 Secretariat: American National Standard Lighting GroupGauges for Electric Lamp Bases and Lampholders An American National Standard implies a consensus of those substantially concerned with its scope and provisions. It is intended as

4、 a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conf

5、orming to the standards. Users are cautioned to obtain the latest editions. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an in

6、terpretation of an American National Standard in the name of the American National Standards Institute. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to re

7、affirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMANot fo

8、r ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI_ANSLG C81.632007 Revision of ANSI_ANSLG C81.63-2006 Copyright 2007 by American National Standard Lighting Group Page 2 of 132 American National Standard Approval of an American National Standard requires verification b

9、y ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. An American National Standard implies a consensus of those substantially concerned with its scope and provisions. Consensus is established when, in the judgment of the A

10、NSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effor

11、t be made toward their resolution. The existence of an American National Standard does not in any respect preclude anyone, whether s/he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. It is inte

12、nded as a guide to aid the manufacturer, the consumer, and the general public. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an

13、 interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the Committee Secretariat referred to on the title page. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any t

14、ime. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards

15、Institute. Copyright 2007 by American National Standard Lighting Group All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher. Printed in the United States of America Copyright

16、National Electrical Manufacturers Association Provided by IHS under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI_ANSLG C81.632007 Revision of ANSI_ANSLG C81.63-2006 Copyright 2007 by American National Standard Lighting Group Page 3 of 132 T

17、able of Contents Foreword 4 Part I General Information and Requirements. 6 1 Scope 7 2 Normative references. 7 3 General information 7 Table 1 ANSI and IEC Lamp Base (Cap) Gauge Standard Sheets. 9 Table 2 ANSI and IEC Lampholder Gauge Standard Sheets 14 Part II ANSI Standard Sheets for Gauges for Ba

18、ses (Caps) and Lampholders for Electric Lamps 22 Part III United States Deviations to IEC Harmonized Gauge Standard Sheets 130 Annexes Annex A Contrast of Projection Methods on Engineering Drawings 131 Annex B Related Standards 132 Copyright National Electrical Manufacturers Association Provided by

19、IHS under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI_ANSLG C81.632007 Revision of ANSI_ANSLG C81.63-2006 Copyright 2007 by American National Standard Lighting Group Page 4 of 132 Foreword (This foreword is not part of American National St

20、andard ANSI_ANSLG C81.63-2007) In 1990 and 1991 the American National Standards (ANS) for lamp bases, lampholders and gauges were split into three separate standards to line up with the IEC format. ANSI C81.61, ANS for Electric Lamp Bases paralleled IEC 60061-1; ANSI C81.62, ANS for Lampholders for

21、Electric Lamps paralleled IEC 60061-2 and ANSI C81.63, Gauges for Electric Lamp Bases and Lampholders paralleled IEC 60061-3. Also a fourth standard, ANSI C81.64 Guidelines for Electrical Lamp Bases, Lampholders and Gauges was published to parallel IEC 60061-4 in 1993. In 1996, the first IEC data sh

22、eets were adopted “as is“ as Nationally Acknowledged International Standards and published as Supplement g to the existing C81.61, 62 and 63 standards. Now many more (if not most) ANSI gauge standard sheets are IEC sheets adopted as ANSI standards. In 2004, a revision and consolidation of ANSI C81.6

23、3 was issued to include, first, a reference to all IEC gauge standard sheets adopted as ANSI standards. Second, standard sheets for a small number of gauges used mainly in North America or not harmonized with IEC were found in Part II. Part III contained any United States deviations to the IEC stand

24、ard sheets, which had been adopted as Nationally Acknowledged International Standards as published in IEC 60061-3. Part IV contained an informative annex on first versus third angle projection and related standards. This standard updates the 2006 edition. Information concerning the approval of this

25、standard is based on the documents listed in the table below: The revisions for ANSI_ANSLG C81.63-2007 are as follows: 1. GX16d (7006-154-1 “Go” gauge for termination, 7006-154A-1 “Go” gauge for connector) 2. PGJ5 (7006-153-1 “Go” gauge for caps, 7006-153A-1 “Not Go” gauge for caps, 7006-153B-1 Gaug

26、e “A” for checking maximum insertion and withdrawal torques in lampholders, 7006-153C-1 Gauge “B” for checking the minimum insertion and withdrawal torques in lampholders) 3. GU6.5 (7006-152-1 “Go” and “Not Go” gauge for caps, 7006-152A-1 “Go” gauge for checking maximum insertion and withdrawal torq

27、ues in lampholders, 7006-152B-1 Gauge for checking the minimum withdrawal torque in lampholders) 4. PG18.5d (7006-147-1 “Go” and “Not Go” gauge for checking keys of caps, 7006-147A-1 Gauges for testing the contacts of caps, 7006-147B-1 Gauge for checking connectors) Copyright National Electrical Man

28、ufacturers Association Provided by IHS under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI_ANSLG C81.632007 Revision of ANSI_ANSLG C81.63-2006 Copyright 2007 by American National Standard Lighting Group Page 5 of 132 5. GX53 (New) (7006-142-

29、1 “Go” and “Not Go” gauges for caps, 7006-142A-1 Gauge “A” for lampholders, 7006-142B-1 Gauge “B” for lampholders, 7006-142C-1 Gauge “C” for lampholders, 7006-142D-1 “Not Go” gauge for caps, 7006-142E-1 “Go and Not Go” gauge for checking keyways in caps, 7006-142F-1 “Not Go” gauge for checking keywa

30、ys in caps, 7006-142G-1 “Go and Not Go” gauge for checking keys in lampholders, 7006-142H-1 “Not Go” gauge for checking maximum key distance, 7006-142J-1 “Not Go” gauge for checking minimum key width) 6. BAW9s and BAZ9s (7006-9-2 “Go” gauges for caps on finished lamps, Sheet 7006-9A-2 Plug gauges fo

31、r lampholders, Sheet 7006-9B-2 Gauges for the testing contact making in lampholders, Sheet 7006-9C-2 “Not Go” gauges for checking non-interchangeability of caps in lampholders) 7. WZ3x16q (7006-151-1 “Go” gauge for base, 7006-151A-1 “Not Go” gauge for base, 7006-151B-1 Insertion, retention and non-i

32、nterchangeability gauge for lampholders) 8. PGJ19 (7006-110-1 PGJ19-1, -2, -3 Go Gauge for caps, 7006-110A-1 PGJ19-4, -5 “Go” Gauge for caps, 7006-110B-1 PGJ19-1, -2, -3, -4 “Go and Not Go” gauge for keys for caps, 7006-110C-1 “Go and Not Go” gauge for keys for lampholders, 7006-110D-1 gauge for che

33、cking connectors) 9. 2G8 (7006-141B-2 Gauge A for checking lampholders, 7006-141C-2 Gauge B for checking lampholders, 7006-141J-2 “Not Go” gauge for checking non- interoperability of keys and caps, 7006-141K-2 “Go” gauge for checking cap pins, 7006-141L-1 “Go” gauge for key dimensions of caps) Other

34、 editorial changes have occurred to this table that are not related to the CDC/RC. These are listed directly below. 1. For multiple systems that take up several lines in the table of contents, and for their corresponding (lengthier) descriptions, parentheticals and lowercase lettering have been used

35、 to ensure that shift will not occur and/or that lines of information will not be obfuscated. 2. All instances of capitalized “Go” and “Not Go” were converted to lowercase in the tables. 3. In Table 1, the W/WX3x16d “Go” gauge for bases was added, as there was a gauge missing there. 4. In Table 1, W

36、X(Y)3x16q was changed to W/WX3x16, WY3x16q. The reference was changed from 7006-105A-2 to 7006-105A-3. Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI_ANSLG C81.6320

37、07 Revision of ANSI_ANSLG C81.63-2006 Copyright 2007 by American National Standard Lighting Group Page 6 of 132 5. In Table 1, W(X)(Y)(Z) was changed to W/WX/WY3x16q Amendment/change CDV RV Revision C81_1-5-10-11_2685 C81_1-5-10-11_2686 Greg Galluccio, Chairman, ASC C81 Al Rousseau, U.S. Technical A

38、dviser, 34B (Consulting) Randolph N. Roy, ANSLG Secretariat Matt Clark, Senior Editor Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI_ANSLG C81.632007 Revision of AN

39、SI_ANSLG C81.63-2006 Copyright 2007 by American National Standard Lighting Group Page 7 of 132 PART I - General Information and Requirements 1 Scope This standard sets forth the specifications for gauges for bases (caps) and lampholders for electric lamps. 1.1 Important Patent Disclaimer It is possi

40、ble that some of the elements of this document may be the subject of patent rights. When this document was approved for publication, ANSLG did not know of any patent applications, patents pending, or existing patents. ANSLG shall not be held responsible for identifying any or all such patent rights.

41、 2 Normative references The following publications contain provisions which, through reference in this text, constitute provisions of this American National Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based

42、 on this American National Standard are encouraged to investigate the possibility of applying the most recent editions of the publications indicated below. ANSI_ANSLG C81.61-2007, Bases (Caps) for Electric Lamps ANSI_ANSLG C81.62-2007, Lampholders for Electric Lamps IEC 60061, Lamp caps and holders

43、together with gauges for the control of interchangeability and safety Part 1: Caps IEC 60061-1 Ed. 3 including Amendment 39-2007 Part 2: Lampholders IEC 60061-2 Ed. 3 including Amendment 36-2007 Part 3: Gauges IEC 60061-3 Ed. 3 including Amendment 38-2007 3 General information Two types of gauge sta

44、ndard sheets are identified in this standard. For some gauges either no international standard exists or the international standard is not acceptable at this time. For such gauges an ANSI standard sheet is included. These standard sheets are identified in Table 1- ANSI and IEC Lamp Base (Cap) Gauge

45、Standard Sheets and Table 2- ANSI and IEC Lampholder Standard Sheets, under the column heading “ANSI_ANSLG C81.63“. These Standard Sheets are found in Part II. Certain standard sheets from IEC standard 60061-1 Lamp caps and holders together with gauges for the control of the interchangeability and s

46、afety, Part 3: Gauges, and its supplements, have been adopted as Nationally Acknowledged International Standards. These constitute part of the American National Standard for Gauges for lamp bases (caps) and lampholders for electric lamps. The standard sheets for these gauges are not included, but ar

47、e identified in Tables I and 2 under the column heading “IEC 60061-3“. If there are any United States deviations from these IEC standard sheets, the sheet number is marked with a footnote and the deviations are found in Part III. Copyright National Electrical Manufacturers Association Provided by IH

48、S under license with NEMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI_ANSLG C81.632007 Revision of ANSI_ANSLG C81.63-2006 Copyright 2007 by American National Standard Lighting Group Page 8 of 132 These IEC standards are available from: American National Standards Institute Attn: “eStandard Store” 25 West 42ndStreet, 4thFloor New York, NY 10036 Or by calling 212 642-4900 d