ANSI ASABE S276.8-2016 Slow-Moving Vehicle Identification Emblem (SMV Emblem).pdf

1、 ANSI/ASAE S276.8 APR2016 Slow-Moving Vehicle Identification Emblem (SMV Emblem) American Society of Agricultural and Biological Engineers ASABE is a professional and technical organization, of members worldwide, who are dedicated to advancement of engineering applicable to agricultural, food, and b

2、iological systems. ASABE Standards are consensus documents developed and adopted by the American Society of Agricultural and Biological Engineers to meet standardization needs within the scope of the Society; principally agricultural field equipment, farmstead equipment, structures, soil and water r

3、esource management, turf and landscape equipment, forest engineering, food and process engineering, electric power applications, plant and animal environment, and waste management. NOTE: ASABE Standards, Engineering Practices, and Data are informational and advisory only. Their use by anyone engaged

4、 in industry or trade is entirely voluntary. The ASABE assumes no responsibility for results attributable to the application of ASABE Standards, Engineering Practices, and Data. Conformity does not ensure compliance with applicable ordinances, laws and regulations. Prospective users are responsible

5、for protecting themselves against liability for infringement of patents. ASABE Standards, Engineering Practices, and Data initially approved prior to the society name change in July of 2005 are designated as “ASAE“, regardless of the revision approval date. Newly developed Standards, Engineering Pra

6、ctices and Data approved after July of 2005 are designated as “ASABE“. Standards designated as “ANSI“ are American National Standards as are all ISO adoptions published by ASABE. Adoption as an American National Standard requires verification by ANSI that the requirements for due process, consensus,

7、 and other criteria for approval have been met by ASABE. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not n

8、ecessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. CAUTION NOTICE: ASABE and ANSI standards may be revised or withdrawn at any time. Additionally, procedures of ASABE require that action be taken periodic

9、ally to reaffirm, revise, or withdraw each standard. Copyright American Society of Agricultural and Biological Engineers. All rights reserved. ASABE, 2950 Niles Road, St. Joseph, Ml 49085-9659, USA, phone 269-429-0300, fax 269-429-3852, hqasabe.org ANSI/ASAE S276.8 APR2016 Copyright American Society

10、 of Agricultural and Biological Engineers 1 ANSI/ASAE S276.8 APR2016 Revision approved April 2016 as an American National Standard Slow-Moving Vehicle Identification Emblem (SMV Emblem) Developed cooperatively by the ASAE Farm Safety Committee and the National Safety Councils Farm Conference Studies

11、 and Research Committee; approved by the ASAE Power and Machinery Division Technical Committee; adopted by ASAE as a Recommendation December 1964; revised and adopted as a Standard December 1966; revised March 1968; approved as an American National Standard July 1971; reconfirmed December 1973; revi

12、sed December 1975; error corrected in percent peak reflectance, Table 1, June 1976; reconfirmed December 1980; revision approved by ANSI July 1984; reconfirmed December 1985; revised editorially July 1989; reconfirmed December 1990; revised editorially February 1991; reconfirmed December 1991; reaff

13、irmed by ANSI October 1992; revised June 1993; revision approved by ANSI January 1994; revised November 1997; revision approved by ANSI May 1998; revised editorially September 1998; reaffirmed by ANSI February 2003; reaffirmed by ASAE February 2003, revised January 2005, revision approved by ANSI Ja

14、nuary 2005, revised September 2010; revision approved by ANSI September 2010; Corrigendum 1 issued March 2011; revised April 2016. Keywords: Emblem, Slow-moving, SMV, Speed, Vehicle 1 Introduction Implements of husbandry/agricultural equipment and other slow-moving machines, either self-propelled or

15、 towed, are often moved between operational sites that are not contiguous. Transport may involve moving on public roads (infrastructure) at ground speeds less than 40 km/h (25 mile/h). This standard provides a means of identifying such slow-moving equipment to communicate to third parties traveling

16、on such public roads as to the relative speed of such equipment to other vehicles utilizing the public roads. 2 Purpose and Scope 2.1 This Standard establishes specifications that define a unique identification emblem, the Slow-Moving Vehicle Emblem (SMV Emblem), to be used only for slow-moving mach

17、ines (vehicles), when operated or traveling on public roads. The requirements and applications of the standard are defined in the standard. The purpose is to communicate to third parties the slower speed capabilities of the slow-moving vehicle to other vehicle(s) using public roads. The primary appl

18、ication of this SMV emblem will be with implements of husbandry but may be used with other machines or vehicles that travel at speeds less than 40 km/h (25 mile/h) and in combination with a Speed Information Symbol (SIS) on vehicles which travel at speeds between 40 km/h (25 mile/h) and 65 km/h (40

19、mile/h). 2.2 This Standard establishes emblem dimensional specifications, performance requirements, related test procedures, mounting requirements and applications of the emblem. 2.3 The SMV emblem shall complement but not replace warning devices such as tail lamps, reflectors, or flashing lights. 2

20、.4 The dimensions and color patterns of the emblem have been established as a unique identification and shall not be altered to permit advertising or other markings on the face of the emblem, except as required in clause 5.2 Emblem Marking. ANSI/ASAE S276.8 APR2016 Copyright American Society of Agri

21、cultural and Biological Engineers 2 3 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including amendments) app

22、lies. ANSI/ASAE S277, Mounting Brackets and Socket for Warning Lamp and Slow-Moving Vehicle (SMV) Identification Emblem ASTM D1014, Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates ASTM D4956-13, Standard Specification for Retroreflective Sheeting f

23、or Traffic Control ASTM E308-15, Standard Practice for Computing the Colors of Objects by Using the CIE System ASTM E991, Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method ASTM D3330/D3330M, Standard Test Method for Peel Adhesion of Pressure-Sensitiv

24、e Tape SAE J575 201508, Test Methods and Equipment for Lighting Devices for Use on Vehicles Less Than 2032 mm in Overall Width SAE J594, Reflex Reflectors ANSI/ASAE S279.17 JUL2013, Lighting and Marking of Agricultural Equipment on Highways ANSI/ASAE S584, Agricultural Equipment: Speed Identificatio

25、n Symbol (SIS) 4 Definitions 4.1 implement of husbandry: A vehicle or specific mobile equipment manufactured, designed or reconstructed for agricultural purposes and, except for incidental uses, primarily used in the conduct of agricultural operations. Included is agricultural equipment in mounted,

26、semi-integral or towed configurations that are transported by the mobile equipment. 4.2 machine (vehicle) mounted emblem: An SMV emblem as illustrated in Figure 1 permanently secured to a slow-moving machine (vehicle) Figure 1 Slow-moving vehicle identification emblem ANSI/ASAE S276.8 APR2016 Copyri

27、ght American Society of Agricultural and Biological Engineers 3 4.3 movable emblem: An emblem as illustrated in Figure 1 securely affixed to a mounting material as illustrated in Figure 2 that shall be displayed on a slow-moving machine (vehicle) Figure 2 Mounting material corner radius and mounting

28、 hole location 4.4 public road (highway): The entire width between the boundary lines of every road publicly maintained when any part thereof is open to the use of the public for purposes of vehicle travel. Term includes highways not limited to trucks and cars, county and municipal roads and lanes.

29、4.5 slow-moving machine (vehicle): An animal-drawn or motorized conveyance, including implements in tow, that is designed for and travels at rates of speed less than those specified in clause 7.2 4.6 Slow-Moving Vehicle (SMV) emblem: A nonreflective red-orange fluorescent equilateral triangle with a

30、 red retroreflective border positioned with a point of the triangle up 5 Description 5.1 The SMV emblem, Figure 1, consists of a fluorescent, nonreflective red-orange equilateral triangle with a red retroreflective border. The nonreflective red-orange fluorescent triangle provides for daylight ident

31、ification. The red retroreflective border appears as a hollow red triangle in the path of motor vehicle headlights at night. The emblem may be machine mounted or movable as defined in clauses 4.2 and 4.3. 5.2 Emblem marking. The emblem manufacturer shall place the name and address of the company on

32、the face of the SMV emblem, and shall CERTIFY that the emblem is in compliance with this Standard S276.8. This information shall be clearly and permanently marked on the face of the emblem. It shall appear only in the lower center or lower right-hand corner of the emblem. On movable emblems, the inf

33、ormation may be located on the reverse side of the mounting material. When the information is located on the face of the emblem, it shall not include trademarks, symbols, or other types of promotional communications, and the total area used for such information on the face of the emblem shall not ex

34、ceed 6.5 cm2(2 in.2). 6 Materials, Performance and Test Requirements 6.1 Retroreflective materials 6.1.1 Visibility. The SMV emblem shall be visible at night as a hollow red triangle from all distances between 305 and 30 m (1000 and 100 ft) from the rear when directly in front of lawful vehicle low

35、beam headlights. 6.1.2 Dimensional requirements. The retroreflective material size shall be as shown in Figure 1. ANSI/ASAE S276.8 APR2016 Copyright American Society of Agricultural and Biological Engineers 4 6.1.3 Construction. Retroreflective sheeting shall consist of a smooth, flat, transparent e

36、xterior film with retroreflective elements embedded or suspended beneath the film so as to form a non-exposed retroreflective optical system. A molded reflex reflector meeting the requirements of SAE J594 is acceptable. 6.1.4 Performance requirements. Retroreflective sheeting shall meet requirements

37、 of ASTM D4956 for type V sheeting except for the photometric requirements and shall meet the minimum photometric performance requirements specified in Table 1. The sheeting shall meet the color specification limits in Table 2. The reflex reflector shall meet the requirements of SAE J594. Table 1 Mi

38、nimum photometric performance (candela/lux/m2) Observation Angle, Entrance Angle, Red Requirements 0.2 4 600.2 30 600.2 45 15 0.5 4 150.5 30 150.5 45 4 Table 2 Color specification limits (daytime) Color 1 2 3 4 x y x y x y x y Red 0.613 0.297 0.708 0.292 0.636 0.364 0.558 0.352 Daytime Luminance Lum

39、inance Factor (Y%) Color Min Max Red 2.5 11 6.1.5 Exterior durability. Samples installed on mounting material specified in 6.3 shall be exposed to the sun for a minimum test period of 36 months outside in south Florida, or similar natural climatic conditions, at an angle of 45 to horizontal facing u

40、pward and south, per ASTM D1014. After exterior durability testing, the emblem material shall show no cracking, crazing, blistering, loss of adhesion, or dimensional change, and shall meet the requirements in Tables 1 and 2 when measured at 0.2 observation angle, and 4 entrance angle, at temperature

41、s between 16 and 38C (60 and 100F) and relative humidity at 20 to 80%. 6.1.6 Corrosion resistance. Material shall show no corrosion or edge fading and meet requirements of Table 1 measured at 0.2 observation angle, and 4 entrance angle in accordance with ASTM D4956, clause 8.3, after corrosion testi

42、ng as specified in SAE J575, clause 4.13. 6.1.7 Adhesion. Emblem Material shall meet the adhesive requirements of ASTM D4956, clause 6.9. 6.2 Nonreflective Fluorescent materials 6.2.1 Visibility. The SMV emblem shall be visible in the daylight as a nonreflective red-orange fluorescent triangle from

43、all distances between 305 and 30 m (1000 and 100 ft). 6.2.2 Dimensional requirements. The nonreflective fluorescent triangle size shall be as shown in Figure 1. 6.2.3 Construction. The nonreflective fluorescent materials shall be of sufficient thickness and strength and toughness to meet the require

44、ments of clause 6.2.5. ANSI/ASAE S276.8 APR2016 Copyright American Society of Agricultural and Biological Engineers 5 6.2.4 Performance requirements. The red-orange color, purity, luminance, and peak reflectance of the nonreflective fluorescent material shall comply with specifications of Table 3 be

45、fore and after the durability test. Table 3 Nonreflective fluorescent values Before Exposure Test After Exposure Test Dominant wavelength, nm 602610 585 min Purity, % 84 min 77 min Luminance, % 28 min 50 max Peak reflectance observable at wavelength nearest dominant, % over 100 75 min 6.2.5 Exterior

46、 durability. Samples installed on mounting material specified in 6.3 shall be exposed to the sun for a minimum test period of 36 months outside in south Florida, or similar natural climatic conditions, at an angle of 45 to horizontal facing upward and south, per ASTM D1014. After exterior durability

47、 test, the emblem material shall show no cracking, crazing, blistering, loss of adhesion, or dimensional change, and shall meet the requirements set forth in this Standard. 6.2.6 Color measurement. The spectrophotometric color values of the nonreflective fluorescent material shall be determined by u

48、sing a colorimetric spectrophotometer conforming to the requirements of ASTM E991. Luminance shall be compared to that of a NIST (National Institute of Standards and Testing) defined perfect reflecting diffuser (PRD) for CIE (Color Institute) illuminant D65. As these nonreflective fluorescent identi

49、fication emblems can be expected to be viewed with an angular subtend of 4 at the eye, it is recommended that the CIE XYZ values be calculated using the CIE 1931 (2) standard observer and CIE illuminant D65. The CIE chromaticity coordinates, x and y, shall be calculated as given below and defined in clause 7.4 of ASTM E308. CIE Y = CIE Y CIEZYXXx+= CIEZYXYy+= For example, given CIE X = 37.87, Y = 34.05, and Z = 32.18 for 2 D65 conditions, luminance factor Y = 34.05, chromaticity values are x = 0.3638 and