1、ASSE 1016-2011/ASME A112.1016-2011/CSA B125.16-11Performance requirements for automatic compensating valves for individual showers and tub/shower combinationsCopyright ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or networking permitted without license fro
2、m IHS-,-,-Legal Notice for Harmonized StandardJointly Developed by ASME, ASSE, and CSAIntellectual property rights and ownershipAs between The American Society of Mechanical Engineers (ASME), American Society of Sanitary Engineering (”ASSE”), and Canadian Standards Association (CSA) (collectively AS
3、ME, ASSE, and CSA) and the users of this document (whether it be in printed or electronic form), ASME, ASSE, and CSA are the joint owners of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets t
4、hat may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. The unauthorized use, modification, copying, or disclosure of this document may violate laws that protect the intellectual property of ASME, ASSE, and CSA an
5、d may give rise to a right in ASME, ASSE, and CSA to seek legal redress for such use, modification, copying, or disclosure. ASME, ASSE, and CSA reserve all intellectual property rights in this document.Disclaimer and exclusion of liabilityThis document is provided without any representations, warran
6、ties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. ASME, ASSE, and CSA d
7、o not warrant the accuracy, completeness, or currency of any of the information published in this document. ASME, ASSE, and CSA make no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.IN NO EVENT SHALL ASME, ASSE, and CSA, THEIR RESP
8、ECTIVE VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, B
9、USINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF ASME OR CSA HAVE BEEN ADVISED OF T
10、HE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, ASME, ASSE, and CSA are not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another
11、person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and ASME, ASSE, and CSA accept no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this
12、 document. ASME, ASSE, and CSA have no power, nor do they undertake, to enforce compliance with the contents of the standards or other documents they jointly publish. Authorized use of this documentThis document is being provided by ASME, ASSE, and CSA for informational and non-commercial use only.
13、The user of this document is authorized to do only the following:If this document is in electronic form:. load this document onto a computer for the sole purpose of reviewing it;. search and browse this document; and. print this document if it is in PDF format.Limited copies of this document in prin
14、t or paper form may be distributed only to persons who are authorized by ASME, ASSE, and CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to. alter this document in any way or remove this Legal Notice from the attac
15、hed standard;. sell this document without authorization from ASME, ASSE, and CSA; or. make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and
16、 if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Copyright ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or networking permitted with
17、out license from IHS-,-,-CSA Standards Update ServiceASSE 1016-2011/ASME A112.1016-2011/CSAB125.16-11October 2011Title:Performance requirements for automatic compensating valves for individual showers and tub/shower combinationsPagination:35 pages (xv preliminary and 20 text), each dated October 201
18、1To register for e-mail notification about any updates to this publicationgo to www.ShopCSA.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2421370.If you require assistance, please e-mail t
19、echsupportcsa.ca or call 416-747-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.Copyright ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-IN
20、TENTIONALLY LEFT BLANKCopyright ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-ASSE 1016-2011/ASME A112.1016-2011/CSAB125.16-11Performance requirements for automatic compensating valves for individual show
21、ers and tub/shower combinationsASSE/ASME/CSA StandardCopyright ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-American Society of Sanitary Engineering901 Canterbury Road, Suite A Westlake, Ohio 44145-1480
22、USATel: 440-835-3040 or Fax: 440-835-3488E-mail: general.infoasse-plumbing.org www.asse-plumbing.orgAmerican Society of Sanitary Engineering 2011Commitment for AmendmentsThis Standard is issued jointly by The American Society of Mechanical Engineers (ASME), the American Society of Sanitary Engineeri
23、ng (ASSE), and the Canadian Standards Association (CSA). Amendments to this Standard will be made only after processing according to the Standards development procedures of ASME, ASSE, and CSA.The American Society of Mechanical Engineers (ASME) Three Park AvenueNew York, NY 10016-5990USAwww.asme.org
24、ISBN 978-0-7918-3399-5 2011The 2011 edition of this Standard is being issued with an automatic addenda subscription service. The use of addenda allows revisions made in response to public review comments or committee actions to be published as necessary.Published in October 2011by Canadian Standards
25、 AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100Mississauga, Ontario, CanadaL4W 5N61-800-463-6727 or 416-747-4044Visit the CSA Online Store at www.ShopCSA.caISBN 978-1-55491-702-0 Canadian Standards Association 2011All rights reserved. No part of this publication
26、may be reproduced in any form whatsoever without the prior permission of the publisherCopyright ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-October 2011 iiiContents The American Society of Sanitary Engi
27、neering The American Society of Mechanical Engineers Canadian Standards AssociationPerformance requirements for automatic compensating valvesfor individual showers and tub/shower combinationsASME Standards Committee on Plumbing Materials and Equipment vASSE Product Standards Committee viiCSA Technic
28、al Committee on Plumbing Fittings viiiASME/ASSE/CSA Harmonization Task Group on Plumbing Fittings xiPreface xiii1Scope12 Reference publications and definitions 22.1 Reference publications 22.2 Definitions 23 Design and general requirements 33.1 Types of devices 33.2 Accessible designs 33.3 Minimum r
29、ated flow 33.4 Pressure 33.5 Temperature 33.6 Servicing 34 Performance requirements and test methods 44.1 General 44.2 Conditioning 44.2.1 Preconditioning 44.2.2 High-temperature conditioning 44.3 Working pressure test 54.3.1 Purpose 54.3.2 Procedure with the valves closed 54.3.3 Procedure with the
30、outlet(s) blocked 54.3.4 Test temperatures and pressures 54.3.5 Failure criteria 64.4 Maximum operating torque or force adjustment test 64.4.1 Purpose 64.4.2 Procedure 64.4.3 Failure criteria 64.5 Life cycle tests 64.5.1 Purpose 64.5.2 Procedure Operating controls 64.5.3 Procedure Internal elements
31、74.5.4 Working pressure 74.5.5 Maximum torque or operating force 84.5.6 Failure criteria 84.6 Pressure and temperature variation test 84.6.1 Purpose 84.6.2 Data gathering, all types of devices 84.6.3 Procedure All types of devices 84.6.4 Procedure Type P devices 9Copyright ASME International Provide
32、d by IHS under license with ASME Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-iv October 2011 The American Society of Sanitary Engineering The American Society of Mechanical EngineersASSE 1016-2011/ASME A112.1016-2011/CSAB125.16-11 Canadian Standards Association
33、4.6.5 Procedure Type T devices 94.6.6 Procedure Type T/P devices 94.6.7 Failure criteria Type P devices 94.6.8 Failure criteria Type T devices 104.6.9 Failure criteria Type T/P devices 104.7 Water supply failure test All types 104.7.1 Purpose 104.7.2 Procedure 104.7.3 Failure criteria 104.8 Mechanic
34、al temperature limit stop test 104.8.1 Purpose 104.8.2 Procedure 114.8.3 Failure criteria 114.9 Outlet temperature and flow capacity test 114.9.1 Purpose 114.9.2 Procedure for all devices 114.9.3 Failure criteria 124.10 Hydrostatic pressure test 124.10.1 Purpose 124.10.2 Procedure 124.10.3 Failure c
35、riteria 125 Markings, packaging, and installation instructions and included literature 135.1 Markings 135.1.1 General 135.1.2 Visibility of markings 135.1.3 Temperature control setting identification 135.2 Installation and maintenance instructions 135.2.1 Instructions 135.2.2 Temperature limit setti
36、ng 135.3 Packaging 13AnnexesA(informative) Verifying the time constant of the temperature-measuring equipment 14B(informative Temperature variation for thermostatic-compensating valves 16Tables1 Life cycle test for the control mechanism 7Figures1 Set-up for high-temperature conditioning, pressure an
37、d temperature variation, and water supply pressure loss tests 52 Set-up for life cycle test for automatic compensating valves 7Copyright ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- The American Society
38、 of Sanitary Engineering The American Society of Mechanical Engineers Canadian Standards AssociationPerformance requirements for automatic compensating valvesfor individual showers and tub/shower combinationsOctober 2011 vASME Standards Committee on Plumbing Materials and EquipmentD.W. Viola IAPMO,M
39、okena, Illinois, USAChairS.A. Remedios Delta Faucet Company,Indianapolis, Indiana, USAVice-ChairR.H. Ackroyd Rand Technical Consulting,Newburyport, Massachusetts, USAS.F. Aridi NSF International,Ann Arbor, Michigan, USAJ.A. Ballanco JB Engineering however, they should not contain proprietary names o
40、r information.ASME procedures provide for reconsideration of any interpretation when or if additional information that might affect an interpretation is available. Further, persons aggrieved by an interpretation may appeal to the cognizant ASME Committee.Interpretations are published on the ASME Web
41、 site under the Committee Pages at http:/cstools.asme.org/ as they are issued.Copyright ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- The American Society of Sanitary Engineering The American Society of
42、Mechanical EngineersASSE 1016-2011/ASME A112.1016-2011/CSAB125.16-11 Canadian Standards Associationxiv October 2011CSA Notes:(1) Use of the singular does not exclude the plural (and vice versa) when the sense allows.(2) Although the intended primary application of this Standard is stated in its Scop
43、e, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose.(3) This publication was developed by consensus, which is defined by CSA Policy governing standardization Code of good practice for standardization as “sub
44、stantial agreement. Consensus implies much more than a simple majority, but not necessarily unanimity”. It is consistent with this definition that a member may be included in the Technical Committee list and yet not be in full agreement with all clauses of this publication.(4) To submit a request fo
45、r interpretation of CSA Standards, please send the following information to inquiriescsa.ca and include “Request for interpretation” in the subject line:(a) define the problem, making reference to the specific clause, and, where appropriate, include an illustrative sketch;(b) provide an explanation
46、of circumstances surrounding the actual field condition; and(c) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are processed in accordance with the CSA Directives and guidelines governing standardization and are
47、published in CSAs periodical Info Update, which is available on the CSA website at http:/standardsactivities.csa.ca.(5) CSA Standards are subject to periodic review, and suggestions for their improvement will be referred to the appropriate committee. To submit a proposal for change to CSA Standards,
48、 please send the following information to inquiriescsa.ca and include “Proposal for change” in the subject line:(a) Standard designation (number);(b) relevant clause, table, and/or figure number;(c) wording of the proposed change; and(d) rationale for the change.(6) Attention is drawn to the possibility that some of the elements of this Standard may be the subject of patent rights. CSAis not to be held responsible for identifying any or all such patent rights. Users of this Standard are expressly advised that determination of the validity of any such patent r
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1