ANSI ASTM E2833-2012 Standard Practice for Certification Bodies that Certify Personnel Engaged in Inspection and Testing of Construction Activities and Materials Used in Constructi.pdf

1、Designation: E2833 12 An American National StandardStandard Practice forCertification Bodies that Certify Personnel Engaged inInspection and Testing of Construction Activities andMaterials Used in Construction, Including SpecialInspection1This standard is issued under the fixed designation E2833; th

2、e number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1.

3、Scope1.1 This practice provides supplemental requirements tothose ofANSI/ISO/IEC 17024 for bodies that certify personnelengaged in inspection and testing of construction activities andmaterials used in construction, including Special Inspection.ANSI/ISO/IEC 17024 provides generic requirements that c

4、anbe adapted to any discipline where assurance that certifiedindividual meets the requirements of the certification scheme.Therefore, certification bodies certifying personnel engaged ininspection and testing of construction activities and materialsused in construction, including Special Inspection,

5、 must meetthe requirements of this practice and ANSI/ISO/IEC 17024.1.2 This practice may be used as a reference by:1.2.1 Developers of standards requiring personnel certifica-tion in inspection and testing of construction activities andmaterials used in construction, including Special Inspection, as

6、a reference to harmonize terminology and reduce confusionamong users;1.2.2 Personnel certification bodies that establish criteriaand certify construction inspection, construction testing, andSpecial Inspection agency personnel against specificrequirements,1.2.3 Accreditation bodies that accredit cer

7、tification bodies,and1.2.4 Users and specifiers as a reference when requiringpersonnel certification.1.3 This practice follows the format of ANSI/ISO/IEC17024 and provides additional requirements where needed.1.4 Certification may be specific to a single test or inspec-tion method or practice or a g

8、rouping or collection of methodsor practices (any such method, code, or practice being herein-after referred to as “method,” or collectively as “methods”).1.5 Personnel certification is an important aspect of thequality system of agencies engaged in inspection and testing ofconstruction activities a

9、nd materials used in construction,including Special Inspection. Certification of personnel isrequired to meet the personnel qualifications of Practice E329.2. Referenced Documents2.1 ASTM Standards:2E329 Specification for Agencies Engaged in ConstructionInspection, Testing, or Special Inspection2.2

10、ANSI/ISO/IEC Standards:3ANSI/ISO/IEC 17024 Conformity Assessment GeneralRequirements for Bodies Operating Certification Systemsof Persons3. Terminology3.1 The definitions in Section 3 supplement the terms anddefinitions provided in ANSI/ISO/IEC 17024.3.2 Definitions of Terms Specific to This Standar

11、d:3.2.1 agency, nan organization, or part thereof, authorizedby the project sponsor or his duly authorized representative toinspect, test, or both, construction and materials used inconstruction as required by the project specifications.3.2.1.1 inspection agency, nan agency whose personnelmake visua

12、l observations and field measurements of construc-tion activities and materials used in construction.(a) DiscussionAn inspection agency may collect andsubmit samples identified with respective portions of theconstruction for laboratory evaluation. The inspection agencyand testing agency may be one o

13、rganization or separateorganizations.1This practice is under the jurisdiction of ASTM Committee E36 on Accredi-tation certification body; construction inspection;personnel; personnel certification; construction testingASTM International takes no position respecting the validity of any patent rights

14、asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any tim

15、e by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will r

16、eceive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM I

17、nternational, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).E2833 123