ANSI ASTM F1333-1991 Standard Specification for Construction of Fire and Foam Station Cabinets.pdf

1、Designation: F1333 91 (Reapproved 2013) An American National StandardStandard Specification forConstruction of Fire and Foam Station Cabinets1This standard is issued under the fixed designation F1333; the number immediately following the designation indicates the year oforiginal adoption or, in the

2、case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification provides design and constructioncriteria for double and single fire a

3、nd foam station cabinets.See Fig. 1 and Fig. 2. Valves, hose, and fittings are notincluded.1.2 Optional back and legs may be provided.1.3 The values stated in inch-pound units are to be regardedas the standard. The values in parentheses are for informationonly.2. Referenced Documents2.1 ASTM Standar

4、ds:2A36/A36M Specification for Carbon Structural SteelA53/A53M Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and SeamlessA167 Specification for Stainless and Heat-ResistingChromium-Nickel Steel Plate, Sheet, and Strip (With-drawn 2014)3A312/A312M Specification for Seamless

5、, Welded, andHeavily Cold Worked Austenitic Stainless Steel PipesA569/A569M Specification for Steel, Carbon (0.15Maximum, Percent), Hot-Rolled Sheet and Strip Commer-cial (Withdrawn 2000)3B209 Specification for Aluminum and Aluminum-AlloySheet and PlateB221 Specification for Aluminum and Aluminum-Al

6、loy Ex-truded Bars, Rods, Wire, Profiles, and TubesF593 Specification for Stainless Steel Bolts, Hex CapScrews, and StudsF594 Specification for Stainless Steel NutsF783 Specification for Staple, Handgrab, Handle, and Stir-rup Rung2.2 American National Standards:4ANSI B18.21.1 Lock WasherANSI B18.22.

7、1 Plain Washer2.3 Other Standards:American Bureau of Shipping Rules for Building andClassing of Steel Vessels5American Welding Society Publication, AWS D 1.1 Struc-tural Welding Code63. Classification3.1 Type I, Single Cabinet (see Fig. 1 and Figs. 3-9):3.1.1 Grade 1Right-hand door active leaf.3.1.1

8、.1 Class A, Mild SteelSpecification A36/A36M.3.1.1.2 Class B, Stainless SteelSpecification A167.3.1.1.3 Class C, AluminumSpecification B209.3.1.2 Grade 2Left-hand door.3.1.2.1 Class A, Mild SteelSpecification A36/A36M.3.1.2.2 Class B, Stainless SteelSpecification A167.3.1.2.3 Class C, AluminumSpecif

9、ication B209.3.2 Type II, Double Cabinet (see Fig. 2 and Fig. 8):3.2.1 Grade 1Right-hand doors active leaf.3.2.1.1 Class A, Mild SteelSpecification A36/A36M.3.2.1.2 Class B, Stainless SteelSpecification A167.3.2.1.3 Class C, AluminumSpecification B209.4. Ordering Information4.1 Fire and foam cabinet

10、s ordered in accordance with thisspecification shall include the following:4.1.1 ASTM title, designation, and year of issue,4.1.2 Quantity (number of cabinets),4.1.3 Type, grade, and class, and4.1.4 Optional features.5. Materials and Manufacture5.1 Materials:5.1.1 See Table 1.5.1.2 Class materials.1

11、This specification is under the jurisdiction of ASTM Committee F25 on Shipsand Marine Technology and is the direct responsibility of Subcommittee F25.11 onMachinery and Piping Systems.Current edition approved Oct. 1, 2013. Published October 2013. Originallyapproved in 1991. Last previous edition app

12、roved in 2007 as F1333 - 91(2007).DOI: 10.1520/F1333-91R13.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3T

13、he last approved version of this historical standard is referenced onwww.astm.org.4Available from American National Standards Institute (ANSI), 25 W. 43rd St.,4th Floor, New York, NY 10036, http:/www.ansi.org.5Available from American Bureau of Shipping (ABS), ABS Plaza, 16855Northchase Dr., Houston,

14、 TX 77060, http:/www.eagle.org.6Available from American Welding Society (AWS), 550 NW LeJeune Rd.,Miami, FL 33126, http:/www.aws.org.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1NOTE 11 in. = 25.4 mm.FIG. 1 Fire and Foam CabinetTyp

15、e IFIG. 2 Fire and Foam CabinetType IITABLE 1 Parts ListItem NumberADescriptionB1 Frame plate, 12 gage2 Hinge pad flatbar, 112 in. by 412 in. by 12 gage3 Hinge undrilled butt, 4 in. long by 2 in. wide, commercialstainless steel4 Brace angle,34 by34 by18 in.5 Door plate, 12 gage6 Staple round bar,38-

16、in. dimensions in accordance withSpecification F7837 Hook round bar,14 in.8 Latch flat bar,316 by1in.9 Keeper flat bar,31 by1in.10 Rivet button monel or aluminum,14 in.11 Clip wrench/nozzle, plate 12 gage12 Snubber rubber, commercial13 Retainer plate, 12 gage14 Saddle pipe 6 NPS Schedule 40, Specifi

17、cation A53/A53M15 Strap hose securing, quick disconnect, commercial16 Clip hook securing, commercial, Specification A16717 Washer TFE-fluorocarbonOptions18 Back plate,316 in.19 Leg angle, 4 by 3 by38 in., Specification A36/A36M20 Brace angle, 4 by 3 by38 in., Specification A36/A36M21 Bolt hex head,3

18、8 16 UNC2A by 114-in. long,stainless steel Type 316, Specification F59322 Washer flat, stainless steel Type 316 for38-in. diameter bolt,ANSI B18.22.1, Type B23 Nut heavy hex38 16 UNC2B, stainless steel Type316, Specification F59424 Washer lock, stainless steel Type 316 for38-in. diameterbolt, ANSI B

19、18.21.1A36/A36M, RegularType II Double Cabinet Only25 Back bar flat bar, 112 in. by 30 in. by 12 gageAItems 18 to 24 (inclusive) are optional.B1 in. = 25.4 mm.FIG. 3 Section “B-B”F1333 91 (2013)25.1.2.1 All materials for Class A cabinets shall meet therequirements of Specifications A53/A53M and A36/

20、A36M orSpecification A569/A569M, except as specified in Table 1.5.1.2.2 All materials for Class B cabinets shall meet therequirements of Specifications A167 and A312/A312M, exceptas specified in Table 1.5.1.2.3 All materials for Class C cabinets shall meet therequirements of Specifications B209 and

21、B221 except asspecified in Table 1.5.2 Manufacture:5.2.1 Welding shall be in accordance with the AmericanBureau of Shipping Rules for Building and Classing of Vesselsor American Welding Society Structural Welding Code AWSD1.1.5.2.2 Punchout shall have a 3-in. (approximately 76-mm)diameter hole with

22、three evenly spaced116-in. (approximately1.5-mm) tabs for both sides of cabinet (see Fig. 3).6. Workmanship, Finish, and Appearance6.1 Fire and foam cabinets shall be free of weld spatter,burrs, and sharp corners, rough edges, and other defects whichmight be hazardous to personnel and equipment.6.2

23、Surface Requirements:6.2.1 Class A CabinetsCoat with 1.0-mil dry filmthickness, inorganic zinc silicate, including options.6.2.2 Class B CabinetsUncoated. Optional legs coatedwith 1.0-mil dry film thickness, inorganic zinc silicate.6.2.3 Class C CabinetsUncoated.7. Packaging and Package Marking7.1 L

24、oose fasteners and hardware shall be packaged andsecurely attached inside each cabinet.7.2 ShippingEach cabinet shall bear a weathertight tagshowing the purchase order number, ASTM standarddesignation, type, and name of manufacturer.7.3 The cabinets shall be crated or attached to a pallet in amanner

25、 acceptable for shipment by commercial carrier. Thecabinets shall be crated individually.8. Keywords8.1 fire; foam; foam station cabinet; marine technology;shipsFIG. 4 Section “C-C”FIG. 5 Wrench/Nozzle Clip Detail “A” FIG. 6 Latch Assembly, Type II, Grade 1 Cabinet Shown, OthersSimilar, Detail “B”F1

26、333 91 (2013)3FIG. 7 Hook Assembly Detail “C”FIG. 8 Hose Rack Detail “D”F1333 91 (2013)4ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of

27、 the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn.

28、Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comme

29、nts have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or m

30、ultiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ 9 Front View of Back Leg and Back Option Detail “E”F1333 91 (2013)5