ANSI ASTM F1799-1997 Standard Guide for Shipboard Generated Waste Management Audits《船舶产生废物管理审核指南》.pdf

1、Designation: F1799 97 (Reapproved 2015) An American National StandardStandard Guide forShipboard Generated Waste Management Audits1This standard is issued under the fixed designation F1799; the number immediately following the designation indicates the year oforiginal adoption or, in the case of rev

2、ision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 PurposeThis guide covers information for assistingshipowners in planning for costs or scheduling co

3、mplicationsduring maintenance, repair, modifications, purchasenegotiations, or scrapping activities. Removal and disposal ofcertain materials disturbed during modification, maintenance,or disposal of systems or components may be costly orinterrupt the work schedule.1.2 Objectives:1.2.1 This guide wi

4、ll describe materials that may be dis-turbed on ships during maintenance or scrapping activities,which may result in costly or time-consuming removal ordisposal actions.1.2.2 This guide will provide a systematic method to iden-tify and record the locations of materials of concern forimmediate planni

5、ng and future reference.1.2.3 This guide will include a brief discussion of issuesrelated to the handling and storage of materials described inthis guide.1.3 Considerations Beyond Scope:1.3.1 This guide is not intended to address materials carriedas cargo or material stored onboard in prepackaged co

6、ntainers.1.3.2 This guide is not intended to address waste productsrelated to the ongoing, day-to-day operation of a ship, such assewage, solid waste, incinerator ash (or other residual productsresulting from solid waste treatment), and residual sludge leftin segregated ballast tanks.1.3.3 This guid

7、e does not provide a comprehensive index oftest methods available for characterizing the materials dis-cussed. Test methods referenced or described should be con-sidered as examples.1.3.4 This guide is not intended to address directly regula-tory issues for any of the materials described.1.3.5 This

8、guide is not intended to address remediationconcerns.2. Referenced Documents2.1 ASTM Standards:2D923 Practices for Sampling Electrical Insulating LiquidsE849 Practice for Safety and Health Requirements Relatingto Occupational Exposure to Asbestos (Withdrawn 1991)32.2 ASHRAE Standards:4ASHRAE Guideli

9、ne 3 Reducing Emission of Fully Haloge-nated Chlorofluorocarbon (CFC) Refrigerants in Refrig-eration and Air-Conditioning Equipment and Applications2.3 EPA Methods:5EPA 600/M482020, Interim Method of the Determinationof Asbestos in Bulk Insulation SamplesEPA SW-846, Method 8080 Organochlorine Pestic

10、ides andPCBsEPASW-846, Method 1311 Toxicity Characteristic LeachateProcedureEPA SW-846, Method 8270 Semi-Volatiles ListEPA SW-846, Method 8260 Volatiles List3. Terminology3.1 Definitions of Terms Specific to This Standard:3.1.1 audit, na process to identify waste materials associ-ated with maintenan

11、ce, repair, modifications, purchasenegotiations, or scrapping activities, some of which may behazardous, with the goal of providing planning informationabout environmental, health, and safety risks and related costs.3.1.2 friable, na physical state in which a dry material canbe easily crumpled, pulv

12、erized, or reduced to powder by handpressure.3.1.3 mobile, adjcapable of being transported from onesurface to another.1This guide is under the jurisdiction of ASTM Committee F25 on Ships andMarine Technology and is the direct responsibility of Subcommittee F25.06 onMarine Environmental Protection.Cu

13、rrent edition approved Dec. 1, 2015. Published December 2015. Originallyapproved in 1997. Last previous edition approved in 2009 as F1799 97 (2009).DOI: 10.1520/F1799-97R15.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For A

14、nnual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.4Available from American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc. (ASHRAE

15、), 1791 Tullie Circle, NE, Atlanta, GA30329, http:/www.ashrae.org.5Available from U.S. Government Printing Office, Superintendent ofDocuments, 732 N. Capitol St., NW, Washington, DC 20401-0001, http:/www.access.gpo.gov.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohock

16、en, PA 19428-2959. United States13.1.4 PCB, na class of chemicals comprised of polychlo-rinated biphenyls.3.1.5 streaming agents, na type of chemical used to fightsmall, contained fires by directing the firefighting agent spe-cifically at the fire.3.1.6 target materials, nspecific materials that the

17、 auditprocess will identify for evaluation.3.1.7 waste oil, noil that cannot be reused or recycled.4. Significance and Use4.1 ApplicabilityThis guide is intended to describe aplanning audit that will improve the shipowners ability toforecast costs and schedule impacts and aid the shipowner inidentif

18、ying environmental, health, and safety concerns associ-ated with the removal, handling, and disposal of potentiallyhazardous shipboard materials.4.2 UseAudits may be performed to aid in planning for avariety of events, including maintenance, repair, modification,purchase, or scrapping. To maximize e

19、fficiency, audits shouldbe tailored to meet the specific needs of the shipowner, withtarget materials identified during the planning process.4.3 CautionLegal restrictions on the removal and disposalof materials discussed in this guide may vary significantly fromport to port, both within the United S

20、tates and abroad. Reasonsfor this variation include the decentralized nature of portcontrol, state, and local environmental regulations, and thelocal availability of landfill or treatment facilities. Users of thisguide should consult local authorities to obtain information onspecific legal requireme

21、nts.5. Procedure5.1 PlanningObjectives for the waste management auditshould be established at the planning stage. A well-plannedaudit will focus on target materials in critical locations tominimize audit costs. Waste management audits, therefore,should be performed by environmental, health, and safe

22、tyexperts familiar with the specific objectives of the audit. Pastaudit reports of the area and other documentation that mayprovide insight into material characterization should be re-viewed to avoid the expense of unnecessary tests. For example,construction specifications may characterize a particu

23、larmaterial, eliminating the need for testing. In some instances,inspection of the ship or interviews with personnel on-site maybe beneficial in planning the audit.5.2 TestingMany materials will require sampling andcharacterization tests. A sampling plan should be followed byqualified and authorized

24、 personnel. Analysis performed by aqualified or certified laboratory may be required.6. Potential Shipboard Generated Wastes6.1 Asbestos:6.1.1 DescriptionAsbestos is the common name of anumber of substances including amosite, anthrophyllite,amphibole, and chrysotile (1).6When asbestos becomesfriable

25、, it may be inhaled or swallowed, penetrating bodytissues and remaining there for many years. Exposure toasbestos has been linked to asbestosis, mesothelioma, and othercancers. Exposure to cigarette smoke may increase the long-term risk of developing asbestos-related lung cancer by asmuch as 90 %.6.

26、1.2 UsesMany common construction products containasbestos, although use of the material in the United States wassignificantly reduced during the 1970s. Likely products includepipe lagging and other types of insulation, vinyl tile andlinoleum, floor tile adhesives, cement sheet and fiberboard,brake p

27、ads and linings, and gasket materials, particularly forhigh-temperature applications.6.1.3 Test Methods (for Thermal Insulation) (2):6.1.3.1 SamplingThe area to be sampled should be sub-divided into homogeneous areas, and sampling of each homo-geneous area should be conducted in a statistically rand

28、ommanner. For surface materials, collect at least three samples foreach area under 1000 ft2, at least five for areas between 1000and 5000 ft2, and at least seven for each area greater than 5000ft2. For piping insulation, collect at least three samples fromeach homogeneous section of piping.6.1.3.2 A

29、nalysisSamples should not be composited foranalysis. Analysis of each sample should be conducted usingthe Polarized Light Microscopy Method described in EPA600/M4-82-020. Under current U.S. regulations, a homoge-neous area may be considered free of asbestos if all samplesfrom that area are shown to

30、contain less than 1 % of asbestos.6.1.4 Handling Precautions (3)Asbestos should only behandled by trained personnel. If asbestos must be disturbed, thearea should be isolated and well-labeled to protect employeesnot involved with the removal or repair work. Protectiveclothing including disposable co

31、veralls, gloves, goggles, and arespirator should be worn when handling asbestos, and person-nel should remove contaminated clothes and wash beforeleaving the work site. Material should be kept wet to minimizepotential for airborne fibers. Waste products should be stored inplastic bags in a sealed ri

32、gid container and protected fromphysical damage. Asbestos material, including asbestos waste,should be stored in an isolated, regulated, and well-markedarea. Smoking, eating, drinking, chewing, or applying cosmet-ics should be avoided in areas in which asbestos exposure islikely. Practice E849 provi

33、des additional details. Asbestosreplacement materials also may pose environmental, safety,and health risks.6.2 PCB-Contaminated Media:6.2.1 DescriptionPCBs have many useful properties in-cluding high stability, low vapor pressure, low flammability,high heat capacity, and low electrical conductivity.

34、 They aresuspected carcinogens, however, and have been associatedwith adverse health and reproductive effects. They also have ahigh potential for bioaccumulation in the food chain.Anumberof trade names exist for PCBs, including Aroclor, Asbestol,Chlorextol, Diaclor, and Dykanol (4).6The boldface num

35、bers in parentheses refer to the list of references at the end ofthis standard.F1799 97 (2015)26.2.2 UsesBecause of the many positive characteristics ofPCBs, oils containing PCBs have been used in a great varietyof applications. The most common use has been as a dielectricfluid in transformers, capa

36、citors, and other electrical equip-ment. The oil also has been used in many other situationsincluding hydraulic equipment, paints, oil-soaked gasketmaterial, and as a plasticizer in many other products. PCBshave been banned in the United States since the mid-1970s, butmaterials manufactured after th

37、e ban have been found tocontain them. Applications involving mobile forms of PCBspose a much greater risk to personnel and the environment.Typical shipboard materials that may contain mobile forms ofPCBs include electrical equipment containing dielectric fluid,oil-soaked gasket material, oil-soaked

38、insulation material, andhydraulic fluids.6.2.3 Test Methods:6.2.3.1 SamplingBecause of significant variation in thePCB content of similar materials, mixing or combiningsamples prior to analysis is not recommended. Similarly,random samples cannot prove untested items either to containor to be free of

39、 PCBs. Liquid oils may be sampled usingPractices D923.6.2.3.2 AnalysisMaterials may be analyzed using EPASW-846, Method 8080.6.2.4 Handling PrecautionsPCBs should only be handledby trained personnel. Protective equipment should be wornwhen handling PCBs, with particular attention to avoiding skinand

40、 respiratory exposure. Work spaces should be well venti-lated (3).6.3 Refrigerants:6.3.1 DescriptionRefrigerants present similar health andenvironmental dangers and may be discussed as a group. Manyrefrigerants are ozone-depleting substances. In general, refrig-erants are relatively safe and stable

41、gases, but may displaceoxygen to dangerously low levels when released into confinedspaces. Some refrigerants also may have acute toxic effects orresult in increased cardiac sensitization at high concentrations.6.3.2 UsesA number of chemicals are used as refrigerantsin shipboard air conditioning or r

42、efrigeration systems. Almostall are halocarbons, with CFC 12 and HCFC 22 being the mostcommon of the traditional refrigerants. Concern for the ozone-depleting potential of these substances has led to the introduc-tion of another common refrigerant, HFC 134a.6.3.3 Test MethodsIdentification of materi

43、als typicallywill not require testing. A quick review of system technicalmanuals should reveal the refrigerant used in the system, andany bottles containing refrigerant gas should be labeled.6.3.4 Handling PrecautionsWork on air conditioning andrefrigeration systems should be performed only by quali

44、fiedpersonnel. Refrigerants should not be intentionally released tothe atmosphere. Refrigerants present in air conditioning orrefrigeration equipment should be recovered and recycled(refrigerants typically have a high resale or recycling value), asdescribed in ASHRAE Guideline 3. If accidental relea

45、seoccurs, personnel should leave the area and avoid inhalingvapors. Personnel requiring emergency medical attention fol-lowing inhalation of refrigerants should not be given cat-echolamine drugs, such as epinephrine, because of the potentialfor increased cardiac sensitization. As a result of possibl

46、e toxicby-products of combustion, refrigerants should be kept awayfrom open flame. Smoking should not be allowed in areas inwhich refrigerants may leak to the atmosphere.6.4 Used or Waste Oils:6.4.1 DescriptionWaste oils include a variety of oil prod-ucts that have been contaminated through use or s

47、torage to thepoint at which they can no longer be used for their intendedpurpose. Many used oils can be recycled. This category doesnot include water contaminated with small amounts of oil,which is addressed in 6.7.6.4.2 UsesThe primary sources of shipboard used orwaste oils are from hydraulic syste

48、ms, engine room machinery,lubricating systems, and fuel systems.6.4.3 Test MethodsTests for halogen content and flashpoint are the most common, but test procedures will varydepending on the intended disposal method and suspectedcontaminants.6.4.4 Handling PrecautionsRecycling may includeprocesses, s

49、uch as reclamation, burning for energy recovery,reprocessing, or re-refining. The recycling potential of a usedoil product will be dependent on the quantity of contaminantspresent. Contaminants may include arsenic, cadmium,chromium, lead, PCBs, sulfur, hydrogen sulfide, or halogens(chlorine, fluorine, and bromine). Unusually low flash pointsalso may limit recycling potential, as will the presence ofdispersants or emulsifying agents. Table 1 summarizes poten-tial recycling problems associated with a variety of common oilproducts.6.5 Paint Products: