ANSI ATIS 0100522-2000 Quality of Service for Business Multimedia Conferencing.pdf

1、 AMERICAN NATIONAL STANDARD FOR TELECOMMUNICATIONS ATIS-0100522.2000(R2014) Quality of Service for Business Multimedia Conferencing As a leading technology and solutions development organization, ATIS brings together the top global ICT companies to advance the industrys most-pressing business priori

2、ties. Through ATIS committees and forums, nearly 200 companies address cloud services, device solutions, emergency services, M2M communications, cyber security, ehealth, network evolution, quality of service, billing support, operations, and more. These priorities follow a fast-track development lif

3、ecycle from design and innovation through solutions that include standards, specifications, requirements, business use cases, software toolkits, and interoperability testing. ATIS is accredited by the American National Standards Institute (ANSI). ATIS is the North American Organizational Partner for

4、 the 3rd Generation Partnership Project (3GPP), a founding Partner of oneM2M, a member and major U.S. contributor to the International Telecommunication Union (ITU) Radio and Telecommunications sectors, and a member of the Inter-American Telecommunication Commission (CITEL). For more information, vi

5、sit. AMERICAN NATIONAL STANDARD Approval of an American National Standard requires review by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards

6、Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made towards their

7、 resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards.

8、The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American Na

9、tional Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards

10、 Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Notice of Disclaimer & Limitation of Liabil

11、ity The information provided in this document is directed solely to professionals who have the appropriate degree of experience to understand and interpret its contents in accordance with generally accepted engineering or other professional standards and applicable regulations. No recommendation as

12、to products or vendors is made or should be implied. NO REPRESENTATION OR WARRANTY IS MADE THAT THE INFORMATION IS TECHNICALLY ACCURATE OR SUFFICIENT OR CONFORMS TO ANY STATUTE, GOVERNMENTAL RULE OR REGULATION, AND FURTHER, NO REPRESENTATION OR WARRANTY IS MADE OFMERCHANTABILITY OR FITNESS FOR ANY P

13、ARTICULAR PURPOSE OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. ATIS SHALL NOT BE LIABLE, BEYOND THE AMOUNT OF ANY SUM RECEIVED IN PAYMENT BY ATIS FOR THIS DOCUMENT, AND IN NO EVENT SHALL ATIS BE LIABLE FOR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. ATIS EXPRESSLY ADVISES

14、THAT ANY AND ALL USE OF OR RELIANCE UPON THE INFORMATION PROVIDED IN THIS DOCUMENT IS AT THE RISK OF THE USER. NOTE - The users attention is called to the possibility that compliance with this standard may require use of an invention covered by patent rights. By publication of this standard, no posi

15、tion is taken with respect to whether use of an invention covered by patent rights will be required, and if any such use is required no position is taken regarding the validity of this claim or any patent rights in connection therewith. Please refer to http:/www.atis.org/legal/patentinfo.asp to dete

16、rmine if any statement has been filed by a patent holder indicating a willingness to grant a license either without compensation or on reasonable and non-discriminatory terms and conditions to applicants desiring to obtain a license. ATIS-0100522.2000(R2014), Quality of Service for Business Multimed

17、ia Conferencing Is an American National Standard developed by the Quality of Service and Reliability (QoSR) Subcommittee under the ATIS Packet Technologies and Systems Committee (PTSC). Published by Alliance for Telecommunications Industry Solutions 1200 G Street, NW, Suite 500 Washington, DC 20005

18、Copyright 2014 by Alliance for Telecommunications Industry Solutions All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. For information contact ATIS at 202.628.6380. AT

19、IS is online at . AMERICAN NATIONAL STANDARD ATIS-0100522.2000American National Standard for Telecommunications Quality of Service for Business Multimedia Conferencing 1 1 Scope, Purpose and Application This document specifies classes of Quality of Service (QOS) sufficient to support Business Multim

20、edia Conferencing on Internet Protocol (IP) networks, defined as equivalent to legacy conference system performance (e.g., H.320 at Basic Rate Interface (BRI) rates). It also specifies the threshold of perceptible impairment for some user interface parameters. This standard applies to communications

21、 between a subset of multimedia end-points, namely Video Teleconference room systems and Desktop systems. The current scope is limited to H.323 point-to-point communication (Multipoint communication is for further study). It applies to cases where IP is utilized between the end-points (e.g., IP/Circ

22、uit-Switched Hybrid Network connections are for further study, e.g. networks supporting H.320-compliant terminals). Figure 1 illustrates some of the terminology of this clause. A user-to-user connection has components on the Customer Installation, and components of one or more network service provid

23、ers between the network interfaces. The Customer Installation includes a multimedia Figure 1 - User-to-User Connection on an IP Network TE TER R R RR R. . . . . .NetworkEnd-End Network (Bearer Service)NetworkNetworkCustomer Installation Customer InstallationUser-to-User Connection (Teleservice QOS)T

24、E RTerminal Equipment Router Protocol StackLAN LANIP Network CloudNI NININetwork InterfaceATIS-0100522.20002 communication system (Terminal Equipment, TE), and may contain a Local Area Network (LAN), routers, etc. Figure 1 includes equivalent ITU-T terms in parentheses (Teleservice and Bearer Servic

25、e). A Teleservice provides a complete user-to-user communications capability, while Bearer Services provide the transport of signals between network interfaces, and do not include the customers terminal equipment or local network. Furthermore, the Network Interface shown in Figure 1 is equivalent to

26、 the ITU-T user-network interface. All networks in the Figure are not necessarily identical, especially in regards to the position of functions such as authentication and billing. Resources (e.g., capacity) may be reserved on some networks comprising the connection, and not on others. Some networks

27、may not be IP-routed networks, e.g., dedicated lines, frame relay networks, and other networks where routers are not present within the administrative boundaries (shown as R in Figure 1). The user-to-user QOS is dependent on the quality and performance of all components that work to establish, or co

28、mprise the media connection. This standard will identify objectives for the user-to-user connection, and allocate portions to the Customer Installation (TE and LAN) and end-end network components. There are different suppliers for terminal equipment and network services, and the allocation will assu

29、re that the intended user-to-user performance levels are achieved. It will not allocate portions to individual network providers. The following are intended uses for this standard: 1. Network planning. 2. Network and Customer Installation component development. 3. User-to-User connection planning. I

30、n connection with User-to-User connection planning activities (item 3), it is necessary to stipulate the desired system type(s). Further, there are cases where certain measurement procedures must be agreed to in advance, since the standardized measurement coverage was incomplete at the time this sta

31、ndard was developed. Although this standard specifies IP network performance parameters, some Non-IP services procured must be evaluated using alternate parameter sets. Draft ITU-T Recommendation I.381, in development at the time this standard was prepared, provides a mapping between the IP layer an

32、d lower layer parameters. Another consideration is whether the Acceptable Level specified in this standard is the goal. When referenced for procurement purposes, the purchaser should specify which values of tables 5 through 12 apply. 2 Normative References The following standards contain provisions

33、which, through reference in this text, constitute provisions of this American National Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this American National Standard are encouraged to investigate the

34、possibility of applying the most recent editions of the standards below. T1.401-1993, Telecommunications Interface Between Carriers and Customer Installations Analog Voicegrade Switched Access Lines Using Loop-Start and Ground-Start Signaling1)_ 1)For electronic copies of some standards, visit ANSIs

35、 Electronic Standards Store (ESS) at www.ansi.org. For printed versions of all these standards, contact Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112-5704, (800) 854-7179. ATIS-0100522.20003 T1.801.01-1995, Telecommunications - Digital Transport of Video Teleconferencing/V

36、ideo Telephony Signals - Video Test Scenes for Subjective and Objective Performance Assessment1)T1.801.04-1997, Telecommunications - Multimedia Synchronization, Delay, and Frame Rate Measurement1)ITU-T Recommendation G.114 (02/96) - One-way transmission time1)ITU-T Recommendation H.320 (07/97) - Nar

37、row-band visual telephone systems and terminal equipment1)ITU-T Recommendation H.323 (02/98) - Packet-based multimedia communications systems1)ITU-T Recommendation I.380 - Internet Protocol Data Communication Service - IP Packet Transfer and Availability Performance Parameters1)ITU-T Recommendation

38、P.931 (12/98) - Multimedia communications delay, synchronization and frame rate measurement1)RFC 2330 - Framework for IP Performance Metrics 2)RFC 2679 - A One-way Delay Metric for IPPM 2)RFC 2680 - A One-way Packet Loss Metric for IPPM 2)RFC 2681 - A Round-trip Delay Metric for IPPM 2)3 Definitions

39、 for MM Conferencing QOS Parameters The following tables summarize the performance parameters of interest at the user and network interfaces. Table 1 - Quality of Service Parameters - MM User Interface Quality Criteria Communications Function Speed Accuracy Availability and Reliability Connection Es

40、tablishment Set-up Time Transfer Time Mis-directed Accessibility Ratio (among media) Connection Failure User Information Transfer Delay (Spontaneity)* Delay variation Contention ResolutionMedia Quality Media Synchronization* Dropped Connection Connection Release Take-down Time Release Failure * = pa

41、rameter specified in this standard _ 2)Internet Request For Comments (RFC) are available from the Internet Engineering Task Force (www.ietf.org) or from the RFC Editor (www.rfc-editor.org). ATIS-0100522.20004 Table 2 - Quality of Service Parameters - End-End Network Interface Quality Criteria Commun

42、ications Function Speed Accuracy Availability and Reliability Connection Establishment Set-up Time Transfer Time Mis-directed Accessibility* Connection Failure User Information (Packet) Transfer Delay* (Network Latency) Delay variation* (within a single media stream and between streams) Information

43、Bit Rate (Committed Bit Rate* Delivered Bit Rate) Lost Transport Packet Rate* (combines IP Packet defects, such as Errored & Lost Packets) Dropped Connection* (IP Availability) Connection Release Take-down Time Release Failure * = parameter specified in this standard Table 3 - Mapping Between Interf

44、aces MM Network MM User Latency Spontaneity Delay Variation Spontaneity, Media Quality, Media Sync Info Rate Media Quality, Media Sync Loss Ratio Media Quality, Media Sync 3.1 User-to-User Connection (Teleservice I.112) A type of telecommunication service that provides the complete capability, inclu

45、ding terminal equipment functions, for communication between users according to protocols established by agreement between Administrations or recognized operating agencies. 3.2 End-End Network (Bearer Service I.112) A type of telecommunication service that provides the capability for the transmissio

46、n of signals between user-network interfaces. ATIS-0100522.20005 3.3 Network Interface (user-network interface I.112) The interface between the terminal equipment and a network termination where the access protocols apply. 3.4 Customer Installation T1.401-1993 All telecommunication equipment and wir

47、ing on the customer side of the network demarcation point. 3.5 Frame T1.801.04 The smallest division of a media stream (defined by the measurement system) that conveys an independent, self-contained unit of content. 3.6 Active Frame (Non-Repeated Video Frame T1.801.04) An output video frame that is

48、distinguishable from its preceding frame(s) in the sequence (when the corresponding input sequence frames possess distinguishable differences). An Active Frame is assumed to have traversed the channel from input to output, and its delay may be included in the visual channel delay distribution. Since

49、 Active Frames convey new visual stimulus, they are the basis for calculation of frame inter-arrival time (and subsequently elementary frame rate). 3.7 Connection Set-up Time The elapsed time from the connection request to notification of remote alerting (or other response, such as station busy) measured at the originating terminal. 3.8 Connection Transfer Time The elapsed time from the transfer request to notification of remote alerting (or other response, such as station busy), measured at the requesting terminal. 3.9 Mis-directed Connection A