ANSI ATIS J-STD-025-B-3-2013 Lawfully Authorized Electronic Surveillance (LAES) Addendum 3 C Support for BSID or Subnet (Addendum to J-STD-025-B).pdf

1、 J-STD-025-B-3 (Addendum to ANSI/J-STD-025-B) March 2013 Lawfully Authorized Electronic Surveillance (LAES) Addendum 3- Support for BSID or SubnetANSI/J-STD-025-B-3-2013 APPROVED: MARCH 8, 2013 JOINT STANDARDS Joint Standards and Publications are adopted in accordance with the American National Stan

2、dards Institute (ANSI) patent policy. By such action, the Telecommunications Industry Association (TIA) or the Alliance for Telecommunications Industry Solutions (ATIS) does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or P

3、ublication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory lim

4、itations before its use. This standard was developed under Project No. ANSI/TIA-PN-025-B-3, formulated under the cognizance of the TIA TR-45 Committee on Mobile Telephone (703)907-7700; Fax: (703)907-7727 or by email to receptiontiaonline.org. This document was coordinated between ATIS and TIA. A Wo

5、rd from TIA: TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstanding between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimu

6、m delay the proper product for his/her particular need. Existence of such Standards and Publications shall not be in any respect preclude any member or nonmember of TIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards

7、 and Publications preclude their voluntary use by those other than TIA members, whether the standard is to be used either domestically or internationally. TIA Documents contain information deemed to be of technical value to the industry, and are published at the request of the originating Committee

8、without necessarily following the rigorous public review and resolution of comments which is a procedural part of the development of a American National Standard (ANS). Further details of the development process are available in the TIA Engineering Manual, located at http:/www.tiaonline.org/standard

9、s/sfg/engineering_manual.cfm A Word from ATIS: As a leading technology and solutions development organization, ATIS brings together the top global ICT companies to advance the industrys most-pressing business priorities. Through ATIS committees and forums, nearly 200 companies address cloud services

10、, device solutions, M2M communications, cyber security, ehealth, network evolution, quality of service, billing support, operations, and more. These priorities follow a fast-track development lifecyclefrom design and innovation through solutions that include standards, specifications, requirements,

11、business use cases, software toolkits, and interoperability testing. ATIS is accredited by the American National Standards Institute (ANSI). ATIS is the North American Organizational Partner for the 3rd Generation Partnership Project (3GPP), a founding Partner of oneM2M, a member and major U.S. cont

12、ributor to the International Telecommunication Union (ITU) Radio and Telecommunications sectors, and a member of the Inter-American Telecommunication Commission (CITEL). For more information, visit www.atis.org. NOTICE FROM PATENT HOLDERS The users attention is called to the possibility that complia

13、nce with this standard may require use of an invention covered by patent rights. By publication of this standard, no position is taken with respect to the validity of this claim or of any patent rights in connection therewith. The patent holder has, however, filed a statement of willingness to grant

14、 a license under these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain a license. Details may be obtained from the Telecommunications Industry Association, Alliance for Telecommunications Industry Solutions or the American National Standards Institute

15、. Copyright Telecommunications Industry Association 2013 Copyright Alliance for Telecommunications Industry Solutions 2013 All rights reserved This document is subject to change. NOTICE OF COPYRIGHT This document is issued under a joint copyright by the Telecommunications Industry Association and th

16、e Alliance for Telecommunications Industry Solutions, and may not be reproduced without permission. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this docum

17、ent, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 Organizations may obtain permission to reproduce a limited number of copies by entering into a

18、 license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 or call U.S.A. and Canada (1-800-854-7179) International (303) 397-7956 OR ATIS Document Center: http:/www.atis.org/docstore/default.aspx Alliance for Telecommunications Industry

19、 Solutions 1200 G Street, NW Suite 500 Washington, DC 20005 (202) 628-6380 NOTICE OF DISCLAIMER AND LIABILITY The document to which this Notice is affixed (the “Document”) has been prepared by one or more Engineering Committees or Formulating Groups of the Telecommunications Industry Association (“T

20、IA”). In addition, the Document was balloted by Alliance for Telecommunications Industry Solutions (ATIS) Wireless Technologies and Systems Committee and Packet Technologies and Systems Committee. TIA is not the author of the Document contents, but publishes and claims copyright to the Document purs

21、uant to licenses and permission granted by the authors of the contents. TIA Engineering Committees and Formulating Groups are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tiaonline

22、.org/standards/sfg/engineering_manual.cfm. The ATIS Wireless Technologies and Systems Committee and ATIS Packet Technologies and Systems Committee is expected to conduct its affairs in accordance with the ATIS Operating Procedures which is available at http:/www.atis.org/legal/op.asp TIAs function i

23、s to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). Likewise, ATIS function, and on behalf of its Committees and Forums, is to administer the

24、process according to its Operating Procedures, but not develop the content of the document. TIA and ATIS do not evaluate, test, verify or investigate the information, accuracy, soundness, or credibility of the contents of the Document. In publishing the Document, TIA and ATIS disclaim any undertakin

25、g to perform any duty owed to or for anyone. If the Document is identified or marked as a project number (PN) document, or as a standards proposal (SP) document, persons or parties reading or in any way interested in the Document are cautioned that: (a) the Document is a proposal; (b) there is no as

26、surance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of int

27、ellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. Neither TIA nor ATIS makes any search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a st

28、atement from the holder thereof is requested, all in accordance with the Manual. When IPR consisting of patents are claimed and called to ATISs attention, a statement from the holder thereof is requested, all in accordance with the ATISs Operating Procedures. Neither TIA nor ATIS takes any position

29、with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. Neither TIA or ATIS will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA or ATIS opine or j

30、udge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA and ATIS do not enforce or monitor compli

31、ance with the contents of the Document. TIA and ATIS do not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRA

32、NTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA AND ATIS EXPRESSLY DISCLAIM ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS

33、AND MAKE NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. NEITHER TIA NOR ATIS

34、 SHALL BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR

35、 THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOU

36、LD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS.ANSI/J-STD-025-B-3 1 Contents 1 Introduction 21.1 General 21.2 Purpose . 21.3 Scope 22 Revisions to ANSI/J-STD-025-B 22.1 Revisions to Section 6.5, cdma2000 Abstract Syntax for Packet Data CII Delivery parameter definitions 22 1 Introduction 1.1 Ge

37、neral Cell Identifiers, while unique to a switch, may not be unique across a cdma2000 telecommunication service providers (TSPs) network. The Cell Identifiers may be duplicated in multiple switches across a single TSPs network. In order to uniquely identify a specific Cell on a cdma2000system, the S

38、ystem Identifier (SID) and Network Identifier (NID) need to be known as well. If Base Station Identifier (1.2 Purpose BSID) SID+NID+Cell Identifier or Subnet is available at a TSPs IAP, it would provide the serving TSP Identity of a subscriber roaming in another network. The BSID or Subnet is helpfu

39、l to uniquely identify a Cell when a TSP sends the more useful location identifying information to an LEA. The purpose of this Addendum to ANSI/J-STD-025-B is to add the BSID or Subnet to the LocationInformation parameter type definition in the cdma2000Abstract Syntax for PacketData CII Delivery. 1.

40、3 Scope This addendum consists of additions and modifications to ANSI/J-STD-025-B for supporting BSID or Subnet information in the LocationInformation parameter type of the cdma20002 Revisions to ANSI/J-STD-025-B Abstract Syntax for PacketData CII Delivery. The following subsections specify text rev

41、isions for ANSI/J-STD-025-B. Paragraphs in ANSI/J-STD-025-B that are not shown, are retained unchanged. 2.1 Revisions to Section 6.5, cdma2000 Abstract Syntax for Packet Data CII Delivery parameter definitions The following text revisions are for the LocationInformation parameter type definition sho

42、wn on Page 96, Line 35: LocationInformation := OCTET STRING - The Location information shall be encoded with Cell - Identifier as specified in TIA -2001.4-D1or BSID - information as specified in TIA-2001.7-D2or Subnet - information as specified in TIA-878-C31TIA-2001.4-D Interoperability Specificati

43、on (IOS) for cdma2000 Access Network Interfaces Part 4-D (A1, A1p, A2, and A5 Interfaces). . 2TIA-2001.7-D Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Part 7-D (A10 and A11 Interfaces). 3TIA-878-C Interoperability Specification (IOS) for High Rate Packet Data (HRPD) Radio Access Network Interfaces with Session Control in the Access Network.