ANSI AWS A5.24 A5.24M-2014 Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods.pdf

1、 Specifi cation for Zirconium and Zirconium-Alloy Welding Electrodes and RodsAWS A5.24/A5.24M:2014An American National StandardAWS A5.24/A5.24M:2014An American National StandardApproved by theAmerican National Standards InstituteJanuary 24, 2014Specification for Zirconium and Zirconium-Alloy Welding

2、 Electrodes and Rods4th EditionSupersedes A5.24/A5.24M:2005Prepared by theAmerican Welding Society (AWS) A5 Committee on Filler Metals and Allied MaterialsUnder the Direction of theAWS Technical Activities CommitteeApproved by theAWS Board of DirectorsAbstractThis specification prescribes the requir

3、ements for classification of zirconium and zirconium alloy electrodes and rods forgas metal arc welding, gas tungsten arc welding, and plasma arc welding. The compositions specified for each classifica-tion represent the latest state-of-the-art. Additional requirements are included for testing proce

4、dures, manufacture, sizes,lengths, and packaging. A guide is appended to the specification as a source of information concerning the classificationsystem employed and the intended use of the zirconium-alloy filler metal.This specification makes use of both U.S. Customary Units and the International

5、System of Units (SI). Since these are notequivalent, each system must be used independently of the other.International Standard Book Number: 978-0-87171-844-0American Welding Society8669 NW 36 St, #130, Miami, FL 331662014 by American Welding SocietyAll rights reservedPrinted in the United States of

6、 AmericaPhotocopy Rights. No portion of this standard may be reproduced, stored in a retrieval system, or transmitted in anyform, including mechanical, photocopying, recording, or otherwise, without the prior written permission of the copyrightowner.Authorization to photocopy items for internal, per

7、sonal, or educational classroom use only or the internal, personal, oreducational classroom use only of specific clients is granted by the American Welding Society provided that the appro-priate fee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, tel: (978) 750-8400

8、;Internet: .AWS A5.24/A5.24M:2014iiStatement on the Use of American Welding Society StandardsAll standards (codes, specifications, recommended practices, methods, classifications, and guides) of the AmericanWelding Society (AWS) are voluntary consensus standards that have been developed in accordanc

9、e with the rules of theAmerican National Standards Institute (ANSI). When AWS American National Standards are either incorporated in, ormade part of, documents that are included in federal or state laws and regulations, or the regulations of other governmen-tal bodies, their provisions carry the ful

10、l legal authority of the statute. In such cases, any changes in those AWS standardsmust be approved by the governmental body having statutory jurisdiction before they can become a part of those laws andregulations. In all cases, these standards carry the full legal authority of the contract or other

11、 document that invokes theAWS standards. Where this contractual relationship exists, changes in or deviations from requirements of an AWS stan-dard must be by agreement between the contracting parties.AWS American National Standards are developed through a consensus standards development process tha

12、t bringstogether volunteers representing varied viewpoints and interests to achieve consensus. While AWS administers theprocess and establishes rules to promote fairness in the development of consensus, it does not independently test, evalu-ate, or verify the accuracy of any information or the sound

13、ness of any judgments contained in its standards.AWS disclaims liability for any injury to persons or to property, or other damages of any nature whatsoever, whether spe-cial, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance onthis

14、standard. AWS also makes no guarantee or warranty as to the accuracy or completeness of any information publishedherein.In issuing and making this standard available, AWS is neither undertaking to render professional or other services for oron behalf of any person or entity, nor is AWS undertaking t

15、o perform any duty owed by any person or entity to someoneelse. Anyone using these documents should rely on his or her own independent judgment or, as appropriate, seek theadvice of a competent professional in determining the exercise of reasonable care in any given circumstances. It isassumed that

16、the use of this standard and its provisions is entrusted to appropriately qualified and competent personnel.This standard may be superseded by new editions. This standard may also be corrected through publication of amend-ments or errata, or supplemented by publication of addenda. Information on the

17、 latest editions of AWS standards includ-ing amendments, errata, and addenda is posted on the AWS web page (www.aws.org). Users should ensure that they havethe latest edition, amendments, errata, and addenda.Publication of this standard does not authorize infringement of any patent or trade name. Us

18、ers of this standard accept anyand all liabilities for infringement of any patent or trade name items. AWS disclaims liability for the infringement of anypatent or product trade name resulting from the use of this standard.AWS does not monitor, police, or enforce compliance with this standard, nor d

19、oes it have the power to do so.Official interpretations of any of the technical requirements of this standard may only be obtained by sending a request,in writing, to the appropriate technical committee. Such requests should be addressed to the American Welding Society,Attention: Managing Director,

20、Technical Services Division, 8669 NW 36 St, # 130, Miami, FL 33166 (see Annex B).With regard to technical inquiries made concerning AWS standards, oral opinions on AWS standards may be rendered.These opinions are offered solely as a convenience to users of this standard, and they do not constitute p

21、rofessionaladvice. Such opinions represent only the personal opinions of the particular individuals giving them. These individualsdo not speak on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations ofAWS. In addition, oral opinions are informal and

22、 should not be used as a substitute for an official interpretation.This standard is subject to revision at any time by the AWS A5 Committee on Filler Metals and Allied Materials. It mustbe reviewed every five years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recommendat

23、ions,additions, or deletions) and any pertinent data that may be of use in improving this standard are required and should beaddressed to AWS Headquarters. Such comments will receive careful consideration by the AWS A5 Committee on FillerMetals and Allied Materials and the author of the comments wil

24、l be informed of the Committees response to the com-ments. Guests are invited to attend all meetings of the AWS A5 Committee on Filler Metals and Allied Materials toexpress their comments verbally. Procedures for appeal of an adverse decision concerning all such comments are pro-vided in the Rules o

25、f Operation of the Technical Activities Committee. A copy of these Rules can be obtained from theAmerican Welding Society, 8669 NW 36 St, # 130, Miami, FL 33166.AWS A5.24/A5.24M:2014iiiPersonnelAWS A5 Committee on Filler Metals and Allied MaterialsH. D. Wehr, Chair Arcos Industries, LLCJ. J. DeLoach

26、 Jr., 1st Vice Chair Naval Surface Warfare CenterR. D. Fuchs, 2nd Vice Chair voestalpine Bohler Welding USA, Inc.R. K. Gupta American Welding SocietyT. Anderson ITW Welding North AmericaJ. C. Bundy Hobart Brothers CompanyJ. L. Caron Haynes International, IncorporatedD. D. Crockett ConsultantR. V. De

27、cker WeldstarD. M. Fedor The Lincoln Electric CompanyJ. G. Feldstein Foster Wheeler North AmericaS. E. Ferree ESAB Welding and Cutting ProductsD. A. Fink The Lincoln Electric CompanyG. L. Franke Naval Surface Warfare CenterR. M. Henson Harris Products GroupS. D. Kiser ConsultantP. J. Konkol Concurre

28、nt Technologies CorporationD. J. Kotecki Damian Kotecki Welding ConsultantsL. G. Kvidahl Ingalls ShipbuildingA. Y. Lau Canadian Welding BureauJ. S. Lee ChevronT. Melfi The Lincoln Electric CompanyM. T. Merlo RevWires, LLCK. M. Merlo-Joseph Apeks SupercriticalB. Mosier Polymet CorporationA. K. Mukher

29、jee Siemens Energy, Inc.T. C. Myers Oceaneering Intervention EngineeringB. A. Pletcher Select-ArcK. C. Pruden BP AmericasK. Roossinck Ingalls ShipbuildingP. K. Salvesen Det Norske Veritas (DNV)K. Sampath Chart Industries, IncorporatedF. A. Schweighardt Air Liquid Industrial US LPW. S. Severance ESAB

30、 Welding and Cutting ProductsM. F. Sinfield Naval Surface Warfare CenterR. C. Sutherlin ATI Wah ChangR. A. Swain Euroweld, Ltd.J. Zhang Indalco AlloysLincoln Electric CompanyAdvisors to the AWS A5 Committee on Filler Metals and Allied MaterialsR. Bateman Soldaduras West Arco SASJ. E. Beckham Chrysle

31、r Group, LLC.J. M. Blackburn Naval Sea Systems CommandM. L. Caruso Special Metals Welding Products CompanyR. A. Daemen ConsultantB. S. Dauble Carpenter Technology CorporationT. A. Davenport PRL IndustriesD. A. DelSignore ConsultantJ. DeVito ConsultantH. W. Ebert Consulting Welding EngineerW. D. Engl

32、and ITW Welding North AmericaC. E. Fuerstenau Lucas-Milhaupt, Inc.AWS A5.24/A5.24M:2014ivJ. P. Hunt ConsultantS. Imaoka KOBE Steel, Ltd.S. J. Knostman Hobart BrothersW. A. Martilla WAMcom Consulting, LLC.R. Menon Stoody CompanyC. L. Null ConsultantM. P. Parekh ConsultantJ. W. Price DMI IndustriesM.

33、A. Quintana The Lincoln Electric CompanyM. J. Sullivan NASSCOM. D. Tumuluru U.S. SteelH. J. White PCC Energy GroupAWS A5K Subcommittee on Titanium and Zirconium Filler MetalR. C. Sutherlin, Chair ATI Wah ChangA. L. Diaz, Secretary American Welding SocietyS. S. Delmore CK Worldwide, IncorporatedB. Kr

34、ueger Los Alamos National LaboratoryK. T. Tran Naval Surface Warfare CenterG. E. Trepus Boeing Research and TechnologyAdvisors to the AWS A5K Subcommittee on Titanium and Zirconium Filler MetalH. Kotaki ConsultantJ. A. McMaster MC ConsultingS. D. Sparkowich Nerac, IncorporatedAWS A5.24/A5.24M:2014vF

35、orewordThis foreword is not part of AWS A5.24/A5.24M:2014, Specification for Zirconium and Zirconium-Alloy WeldingElectrodes and Rods, but is included for informational purposes only.This specification makes use of both U.S. Customary Units and the International System of Units (SI). The measurement

36、sare not exact equivalents; therefore, each system must be used independently of the other, without combining values inany way when referring to filler metal properties. In selecting rational metric units, the AWS A1.1, Metric Practice Guidefor the Welding Industry and International Standard ISO 544

37、, Welding consumablesTechnical delivery conditions forwelding filler metalsType of product, dimensions, tolerances, and markings, are used where suitable. Tables and fig-ures make use of both U.S. Customary and SI Units, which with the application of the specified tolerances provides forinterchangea

38、bility of products in both the U.S. Customary and SI Units.The first Specification for Zirconium and Zirconium Bare Welding Rods and Electrodes was prepared by theSubcommittee on Zirconium Filler Metal in 1976. This edition originally had three electrode classifications, ERZr1,ERZr2 and ERZr3. In th

39、e 1979 edition, the very pure grade of zirconium (ErZr1) was deleted and an additional grade,ERZr4 (with 2%3% Niobium), was added to the specification and includes an addition to the check analysis toleranceby the joint AWS Subcommittee on Titanium and Zirconium Filler Metals. In 1990, the specifica

40、tion was revised toinclude the Acceptance and Certification clauses to the appendix. In 2005, the specification was revised to include an oxy-gen range for all electrode classifications. This was done to take into account the oxygen pickup during the zirconiumwelding process in order to create final

41、 weld strength similar to that of the parent metal. Additionally, the 2005 A5.24specification was the first to use both the U.S. Customary Units and the International System Units (SI). AWSA5.24/A5.24M:2014, Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods, is the fourth r

42、evi-sion of the document. This revision primarily includes updates to the reference documents.A vertical line in the margin or underlined text in clauses, tables, or figures indicates an editorial or technical change fromthe 2005 edition.Previous editions of the document are as follows:AWS A5.24-76,

43、 Specification for Zirconium and Zirconium Alloy Bare Welding Rods and ElectrodesAWS A5.24-79, Specification for Zirconium and Zirconium Alloy Bare Welding Rods and ElectrodesANSI/AWS A5.24-90, Specification for Zirconium and Zirconium Alloy Welding Electrodes and RodsAWS A5.24/A5.24M:2005, Specific

44、ation for Zirconium and Zirconium-Alloy Welding Electrode and RodsComments and suggestions for the improvement of this standard are welcome. They should be sent to the Secretary,AWS A5 Committee on Procedure and Performance Qualification, American Welding Society, 8669 NW 36 St, #130,Miami, FL 33166

45、.AWS A5.24/A5.24M:2014viTable of ContentsPage No.Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ivForeword. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viList of Tables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii1. Scope . . . .

47、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12. Normative References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48、 . . . . . . . . . . 13. Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24. Acceptance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25. Certification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26. Rounding Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27. Summary of Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48. Retest . . . . . . .