ANSI AWS A5.35 A5.35M-2015 Specification for Covered Electrodes for Underwater Wet Shielded Metal Arc Welding.pdf

1、AWS A5.35/A5.35M: 2015An American National StandardSpecification for Covered Electrodes for Underwater Wet Shielded Metal Arc WeldingAWS A5.35/A5.35M: 2015An American National StandardApproved by the American National Standards Institute June 23, 2015Specification for Covered Electrodes for Underwat

2、er Wet Shielded Metal Arc Welding1st EditionPrepared by the American Welding Society (AWS) A5 Committee on Filler Metals and Allied MaterialsUnder the Direction of the AWS Technical Activities CommitteeApproved by the AWS Board of DirectorsAbstractThis specification establishes the requirements for

3、classification of covered electrodes for underwater wet shielded metal arc welding. The requirements include mechanical properties of weld metal, weld metal soundness, and usability of electrode. Requirements for composition of the weld metal, standard sizes and lengths, marking, manufacturing, and

4、packaging are also included. A guide to the use of the standard is included in an Annex.This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other.iiAWS A5.35/A5.35M: 2015In

5、ternational Standard Book Number: 978-0-87171-862-42015 by American Welding SocietyAll rights reservedPrinted in the United States of AmericaPhotocopy Rights. No portion of this standard may be reproduced, stored in a retrieval system, or transmitted in any form, including mechanical, photocopying,

6、recording, or otherwise, without the prior written permission of the copyright owner.Authorization to photocopy items for internal, personal, or educational classroom use only or the internal, personal, or educational classroom use only of specific clients is granted by the American Welding Society

7、provided that the appropriate fee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, tel.: (978) 750-8400; Internet: .iiiAWS A5.35/A5.35M: 2015Statement on the Use of American Welding Society StandardsAll standards (codes, specifications, recommended practices, methods

8、, classifications, and guides) of the American Welding Society (AWS) are voluntary consensus standards that have been developed in accordance with the rules of the American National Standards Institute (ANSI). When AWS American National Standards are either incorporated in, or made part of, document

9、s that are included in federal or state laws and regulations, or the regulations of other governmental bodies, their provisions carry the full legal authority of the statute. In such cases, any changes in those AWS standards must be approved by the governmental body having statutory jurisdiction bef

10、ore they can become a part of those laws and regulations. In all cases, these standards carry the full legal authority of the contract or other document that invokes the AWS standards. Where this contractual relationship exists, changes in or deviations from requirements of an AWS standard must be b

11、y agreement between the contracting parties.AWS American National Standards are developed through a consensus standards development process that brings together volunteers representing varied viewpoints and interests to achieve consensus. While AWS administers the process and establishes rules to pr

12、omote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in its standards.AWS disclaims liability for any injury to persons or to property, or other damages of any nature whatsoever

13、, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance on this standard. AWS also makes no guarantee or warranty as to the accuracy or completeness of any information published herein.In issuing and making this standard

14、 available, AWS is neither undertaking to render professional or other services for or on behalf of any person or entity, nor is AWS undertaking to perform any duty owed by any person or entity to someone else. Anyone using these documents should rely on his or her own independent judgment or, as ap

15、propriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. It is assumed that the use of this standard and its provisions is entrusted to appropriately qualified and competent personnel.This standard may be superseded by new edit

16、ions. This standard may also be corrected through publication of amendments or errata, or supplemented by publication of addenda. Information on the latest editions of AWS standards including amendments, errata, and addenda is posted on the AWS web page (www.aws.org). Users should ensure that they h

17、ave the latest edition, amendments, errata, and addenda.Publication of this standard does not authorize infringement of any patent or trade name. Users of this standard accept any and all liabilities for infringement of any patent or trade name items. AWS disclaims liability for the infringement of

18、any patent or product trade name resulting from the use of this standard.AWS does not monitor, police, or enforce compliance with this standard, nor does it have the power to do so.Official interpretations of any of the technical requirements of this standard may only be obtained by sending a reques

19、t, in writing, to the appropriate technical committee. Such requests should be addressed to the American Welding Society, Attention: Managing Director, Technical Services Division, 8669 NW 36th St, #130, Miami, FL 33166 (see Annex B). With regard to technical inquiries made concerning AWS standards,

20、 oral opinions on AWS standards may be rendered. These opinions are offered solely as a convenience to users of this standard, and they do not constitute professional advice. Such opinions represent only the personal opinions of the particular individuals giving them. These individuals do not speak

21、on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations of AWS. In addition, oral opinions are informal and should not be used as a substitute for an official interpretation.This standard is subject to revision at any time by the AWS A5 Committee on

22、 Filler Metals and Allied Materials. It must be reviewed every five years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recommendations, additions, or deletions) and any pertinent data that may be of use in improving this standard are required and should be addressed to A

23、WS Headquarters. Such comments will receive careful consideration by the AWS A5 Committee on Filler Metals and Allied Materials and the author of the comments will be informed of the Committees response to the comments. Guests are invited to attend all meetings of the AWS A5 Committee on Filler Meta

24、ls and Allied Materials to express their comments verbally. Procedures for appeal of an adverse decision concerning all such comments are provided in the Rules of Operation of the Technical Activities Committee. A copy of these Rules can be obtained from the American Welding Society, 8669 NW 36th St

25、, #130, Miami, FL 33166.ivAWS A5.35/A5.35M: 2015This page is intentionally blank.vAWS A5.35/A5.35M: 2015PersonnelAWS A5 Committee on Filler Metals and Allied MaterialsH. D. Wehr, Chair Arcos Industries LLCJ. J. DeLoach, Jr, 1st Vice Chair Naval Surface Warfare CenterR. D. Fuchs, 2nd Vice Chair Voest

26、alpine Bohler Welding USA, IncR. K. Gupta, Secretary American Welding SocietyT. Anderson ITW Welding North AmericaJ. C. Bundy Hobart Brothers CompanyJ.L. Caron Haynes International, IncorporatedD. D. Crockett Consultant R. V. Decker WeldstarD. M. Fedor The Lincoln Electric CompanyJ. G. Feldstein Fos

27、ter Wheeler North AmericaD. A. Fink The Lincoln Electric CompanyG. L. Franke ConsultantR. M. Henson Harris Products GroupS. D. Kiser ConsultantP. J. Konkol Concurrent Technologies CorporationD. J. Kotecki Damian Kotecki Welding ConsultantsL. G. Kvidahl Ingalls ShipbuildingA. Y. Lau Canadian Welding

28、BureauJ. S. Lee ChevronJ. R. Logan Babcock and WilcoxT. Melfi The Lincoln Electric CompanyM. T. Merlo ConsultantK. M. Merlo-Joseph Apeks SupercriticalB. Mosier Polymet CorporationA. K. Mukherjee Siemens Power Generation IncorporatedT. C. Myers Oceaneering Intervention EngineeringB. A. Pletcher Selec

29、t-ArcJ. D. Praster NuWeld IncorporatedK. C. Pruden BP AmericasK. Roossinck Ingalls ShipbuildingP. K. Salvesen Det Norske Veritas (DNV)K. Sampath Chart IndustriesF.A. Schweighardt Air Liquide Industrial US LPW. S. Severance ESAB Welding suitability for specific base metals should be established by th

30、e customer during welding procedure qualification testing (see Annex A for further considerations).This specification does not govern depth of water capability or maximum exposure time for wet welding electrodes classified to this document. However, such information shall be clearly shown as require

31、d by the marking requirements of Clause 14.Safety and health issues and concerns are beyond the scope of this standard and, therefore, are not fully addressed herein. Some safety and health information can be found in informative Annex A. Safety and health information is available from other sources

32、, including, but not limited to, ANSI Z49.1, Safety in Welding, Cutting, and Allied Processes, and applicable federal and state regulations.2. Normative ReferencesThe following standards contain provisions which, through reference in this text, constitute mandatory provisions of this AWS standard. F

33、or undated references, the latest edition of the referenced standard shall apply. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply.2.1 The following AWS standards are referenced in the mandatory clauses of this document:(1) AWS A5.01M/A5.01 (ISO

34、 14344 MOD), Welding ConsumablesProcurement of Filler Metals and Fluxes;(2) AWS A5.1/A5.1M, Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding;(3) AWS A5.4/A5.4M, Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding;(4) AWS B4.0, Standard Methods for Mech

35、anical Testing of Welds;(5) AWS B4.0M, Standard Methods for Mechanical Testing of Welds;(6) AWS D3.6M, Underwater Welding Code; and(7) AWS PRG, The Practical Reference Guide for Radiographic Inspection Acceptance Criteria.2AWS A5.35/A5.35M: 20152.2 The following ANSI standard is referenced in the ma

36、ndatory clauses of this document:(1) ANSI Z49.1, Safety in Welding, Cutting and Allied Processes2.3 The following ASTM International standards are referenced in the mandatory clauses of this document:(1) ASTM A36/A36M, Standard Specification for Carbon Structural Steel;(2) ASTM E8/E8M, Standard Test

37、 Methods for Tension Testing of Metallic Materials;(3) ASTM E29, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications;(4) ASTM E94, Standard Guide for Radiographic Examination;(5) ASTM E65/E165M, Standard Practice for Liquid Penetrant Examination f

38、or General Industry;(6) ASTM E353, Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys;(7) ASTM E354, Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, a

39、nd Cobalt Alloys;(8) ASTM E415, Standard Test Method for Atomic Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel; and(9) ASTM E709, Standard Guide for Magnetic Particle Testing.2.4 The following ISO standards are referenced in the mandatory clauses of this document:(1) ISO 80000-

40、1, Annex B, Rule A, Quantities and UnitsPart 1: General2.5 The following Military Standard (MIL) is referenced in the mandatory clauses of this document:(1) MIL-STD-2035A, Nondestructive Testing Acceptance Criteria3. Classification3.1 Electrode Classification. The welding electrodes covered by this

41、specification utilize the following system to classify the welding electrodes covered:(1) Type of current (See Table 1)(2) Filler metal type by general chemical composition (See Table 1)(3) AWS classification of electrode by AWS specification, when applicable (See Table 2)(4) Weld metal integrity (Y

42、), based on soundness and mechanical properties (See Table 2)(5) Welding position (Z) (See Table 3)3.2 Examples of electrode classification. The following are four examples of electrode classification:(1) UWE6013-2A: Ferritic steel electrode (Table 1), similar to the E6013 classification of AWS A5.1

43、 (Table 2), meeting the Level 2 quality standards (Table 2), qualified for all position welding (Table 3).(2) UWE7014-1F: Ferritic steel electrode (Table 1), similar to the E7014 classification of AWS A5.1 (Table 2), meeting the Level 1 quality standards (Table 2), qualified for the flat position on

44、ly (Table 3).(3) UWE310-16-3H: Austenitic stainless steel electrode (Table 1), similar to the E310-16 classification of AWS A5.4 (Table 2), meeting the Level 3 quality standards (Table 2), qualified for flat and horizontal welding only (Table 3).(4) UWENiXX-1A: Nickel electrode (Table 1), meeting th

45、e Level 1 quality standards (Table 2), qualified for all position welding (Table 3).3AWS A5.35/A5.35M: 20154. AcceptanceAcceptance of welding electrodes (those to which an auxiliary waterproof coating is to be applied) shall be in accordance with the provisions of AWS A5.01M/A5.01 (ISO 14344 MOD) or

46、 equivalent document. Additional procurement requirements for wet welding electrodes are covered in this specification.5. CertificationBy affixing the AWS specification and classification designations to the packaging, or the classification to the product, the manufacturer certifies that the product

47、 meets the requirements of this specification.6. Rounding ProcedureFor purposes of determining compliance with the requirements of this specification, the actual test values obtained shall be subjected to the rounding rules of ASTM E29 or ISO 80000-1, Annex B, Rule A (the results are the same). If t

48、he measured Table 1Electrode ClassificationsClassificationaType of CurrentGeneral Filler Metal Chemical CompositionA5.35 A5.35MUWE60XX-YZ UWE43XX-YZ Direct, electrode positive or negative Ferritic steelUWE70XX-YZ UWE49XX-YZ Direct, electrode positive or negative Ferritic steelUWE3XX-16-YZ UWE3XX-16-

49、YZ Direct, electrode positive Austenitic stainless steelUWENiXX-YZ UWENiXX-YZ Direct, electrode positive Nickel alloya Classifications of electrodes shall be determined according to the capability of the electrode to meet the tests specified herein (see Tables 4 and 5).Table 2Classification and Designators by Specification and PropertiesClassification Weld Metal Soundness/ Mechanical Property Level (Y)aA5.35 A5.35M AWS SpecificationbUWE60XX-YZ UWE43XX-YZ 1, 2 or 3 A5.1/A5.1MUWE70XX-YZ UWE49XX-YZ 1, 2 or 3 A5.1/A5.1MUWE3XX-16-YZ UWE3XX-16-YZ 1, 2 or 3 A5.4/A5.4MUWENiXX-YZ UWENi