ANSI AWWA B305-2015 Anhydrous Ammonia.pdf

1、AWWA Standard SM Anhydrous Ammonia Effective date: May 1, 2015. First edition approved by AWWA Board of Directors Feb. 12, 2006. This edition approved Jan. 24, 2015. Approved by American National Standards Institute Jan. 12, 2015. ANSI/AWWA B305-15 (Revision of ANSI/AWWA B305-06) ii AWWA Standard Th

2、is document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering and administrative information normally contained in specifications. The AWWA standards usually contain options that m

3、ust be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA pub- lication of a standard does not constitute endorsement of any product or product type, nor does AWWA test, certify, or approve any product. The u

4、se of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any applicable law, regulation, or code of any governmental authority. AWWA standards are intended to represent a consensus of the water supply industry that the product described will pr

5、ovide satisfactory service. When AWWA revises or withdraws this standard, an official notice of action will be placed in the Official Notice section of Journal - American Water Works Association. The action becomes effective on the first day of the month fol- lowing the month of Journal - American W

6、ater Works Association publication of the official notice. American National Standard An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An American National Standard is intended as a guide to aid the manufacturer, the consumer, and the

7、general public. The existence of an American National Standard does not in any respect preclude anyone, whether that person has ap - proved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standard. American National St

8、andards are subject to periodic review, and users are cautioned to obtain the latest editions. Producers of goods made in conformity with an American National Standard are encour - aged to state on their own responsibility in advertising and promotional materials or on tags or labels that the goods

9、are produced in conformity with particular American National Standards. Caution n oti Ce : The American National Standards Institute (ANSI) approval date on the front cover of this standard indicates completion of the ANSI approval process. This American National Standard may be revised or withdrawn

10、 at any time. ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of ANSI approval. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National St

11、andards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036; 212.642.4900; or emailing infoansi.org. ISBN-13, print: 978-1-62576-072-2 eISBN-13, electronic: 978-1-61300-327-5DOI: http:/dx.doi.org/10.12999/AWWA.B305.15 All rights reserved. No part of this publication may be reproduced or

12、 transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information or retrieval system, except in the form of brief excerpts or quotations for review purposes, without the written permission of the publisher. Copyright 2015 by American Water Works

13、Association Printed in USA hours of work by your fellow water professionals. Revenue from the sales of this AWWA material supports ongoing product development. Unauthorized distribution, either electronic or photocopied, is illegal and hinders AWWAs mission to support the water community. This AWWA

14、content is the product of thousands of iii Committee Personnel The AWWA Standards Committee on Disinfectants, which reviewed and approved this standard, had the following personnel at the time of approval: K. Blake Stark, Chair General Interest Members M.P. Chaulk, CBCL Limited Consultants Limited,

15、Halifax Region Municipality, N.S., Canada (AWWA) M.C. Graves, HDR Engineering, Austin, Texas (AWWA) H. Huddle, Camp Dresser write to the department at 6666 West Quincy Avenue, Denver, CO 80235-3098; or email at standardsawwa.org. 1 AWWA Standard Anhydrous Ammonia SECTION 1: GENERAL Sec. 1.1 Scope Th

16、is standard describes the use of anhydrous ammonia in the treatment of potable water, wastewater, and reclaimed water. Anhydrous ammonia is expressed by the formula NH 3 . Anhydrous means free from water. Sec. 1.2 Purpose The purpose of this standard is to provide the minimum requirements for anhydr

17、ous ammonia, including physical, chemical, sampling, testing, packaging, and shipping requirements. Sec. 1.3 Application This standard can be referenced in documents for purchasing and receiving anhydrous ammonia and can be used as a guide for testing the physical and chemi- cal properties of anhydr

18、ous ammonia. The stipulations of this standard apply when this document has been referenced and then only to anhydrous ammonia used in the treatment of potable water, wastewater, and reclaimed water. ANSI/AWWA B305-15 (Revision of ANSI/AWWA B305-06) 2 AWWA B305-15 SECTION 2: REFERENCES This standard

19、 references the following documents. In their latest editions, they form a part of this standard to the extent specified within the standard. In any case of conflict, the requirements of this standard shall prevail. AOAC International.* Official Methods of Analysis. Method 959.02. Compressed Gas Ass

20、ociation, Inc. American National Standard Safety Requirements for the Storage and Handling of Anhydrous Ammonia. CGA G-2.1, ANSI K61.1. Compressed Gas Association, Inc. Anhydrous Ammonia. CGA G-2. Compressed Gas Association Inc. Safe Handling of Compressed Gas in Con- tainers. CGA P-1. ISO 7106 Liqu

21、efied anhydrous ammonia for industrial useDetermination of oil contentGravimetric and infrared spectrometric methods. NSF /ANSI 60, Drinking Water Treatment ChemicalsHealth Effects. SECTION 3: DEFINITIONS The following definitions shall apply in this standard: 1. Day: A day is defined as a 24-hr per

22、iod. 2. Manufacturer: The party that manufactures, fabricates, or produces materials or products. 3. Potable water: Water that is safe and satisfactory for drinking and cooking. 4. Purchaser: The person, company, or organization that purchases any materials or work to be performed. 5. Reclaimed wate

23、r: Wastewater that becomes suitable for beneficial use as a result of treatment. * AOAC International, 481 North Frederick Avenue, Suite 500, Gaithersburg, MD 20877. Compressed Gas Association Inc., 1235 Jefferson Davis Highway, Room 501, Arlington, VA 22202. International Organization for Standardization (ISO) ISO Central Secretariat, 1, rue de Varembe, Case postale 56, CH-1211 Geneva 20, Switzerland. NSF International, 789 N. Dixboro Road, Ann Arbor, MI 48105. American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036.