ANSI AWWA C219-2017 Bolted Sleeve-Type Couplings for Plain-End Pipe.pdf

1、AWWA Standard SM Bolted Sleeve- Type Couplings for Plain-End Pipe Effective date: August 1, 2017. First edition approved by AWWA Board of Directors June 23, 1991. This edition approved Jan. 14, 2017. Approved by American National Standards Institute Feb. 23, 2017. ANSI/AWWA C219-17 (Revision of ANSI

2、/AWWA C219-11) Copyright 2017 American Water Works Association. All Rights Reserved. ii AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering and administra

3、tive information normally contained in specifications. The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA pub- lication of a standard does not constitut

4、e endorsement of any product or product type, nor does AWWA test, certify, or approve any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any applicable law, regulation, or code of any governmental authority. AWWA standar

5、ds are intended to represent a consensus of the water industry that the product described will provide satisfactory ser- vice. When AWWA revises or withdraws this standard, an official notice of action will be placed on the first page of the Official Notice section of Journal American Water Works As

6、sociation. The action becomes effective on the first day of the month following the month of Journal American Water Works Association publication of the official notice. American National Standard An American National Standard implies a consensus of those substantially concerned with its scope and p

7、rovisions. An American National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether that person has approved the standard or not, from manufacturing, marketing,

8、purchasing, or using products, processes, or proce - dures not conforming to the standard. American National Standards are subject to periodic review, and users are cau- tioned to obtain the latest editions. Producers of goods made in conformity with an American National Standard are encouraged to s

9、tate on their own responsibility in advertising and promotional materials or on tags or labels that the goods are produced in conformity with particular American National Standards. Caution n oti Ce : The American National Standards Institute (ANSI) approval date on the front cover of this standard

10、indicates completion of the ANSI approval process. This American National Standard may be revised or withdrawn at any time. ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of publication. Purchasers of American Nation

11、al Standards may receive current information on all standards by calling or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036; 212.642.4900; or emailing infoansi.org. hours of work by your fellow water professionals. Revenue from the sales of th

12、is AWWA material supports ongoing product development. Unauthorized distribution, either electronic or photocopied, is illegal and hinders AWWAs mission to support the water community. This AWWA content is the product of thousands of ISBN-13, print: 978-1-62576-230-6 eISBN-13, electronic: 978-1-6130

13、0-428-9DOI: http:/dx.doi.org/10.12999/AWWA.C219.17 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information or retrieval system, except in the form of brief excerpts or

14、quotations for review purposes, without the written permission of the publisher. Copyright 2017 by American Water Works Association Printed in USA Copyright 2017 American Water Works Association. All Rights Reserved. iii Committee Personnel The Steel Water Pipe Manufacturers Technical Advisory Commi

15、ttee (SWPMTAC) Task group for updating C219, which developed this standard, had the following personnel at the time: Ram N. Satyarthi, Chair General Interest Members L. Aulich, Mueller Company, Chattanooga, Tenn. (AWWA) S. Bradberry, Ford Meter Box Company Inc., Pell City, Ala. (AWWA) R.J. Card, Man

16、ufacturers Consultant, Sugar Hill, Ga. (AWWA) A. Collins, JCM Industries Inc., Nash, Texas (AWWA) T. Crail, Straub Coupling, National City, Calif. (AWWA) J. Forni, Jifco Inc., Livermore, Calif. (AWWA) B.D. Keil, Northwest Pipe Company, Draper, Utah (AWWA) J.L. Luka, American SpiralWeld Pipe Company,

17、 Columbia, S.C. (AWWA) J. Olmos, Ameron International, Rancho Cucamonga, Calif. (AWWA) D. Piontek, Total Piping Solutions Inc., Olean, N.Y. (AWWA) J. Reinheimer, Robar Industries, Surrey, B.C., Canada (AWWA) R.N. Satyarthi, Baker Coupling Company Inc., Los Angeles, Calif. (AWWA) K.L. Shaddix, Smith-

18、Blair Inc., Texarkana, Texas (AWWA) C. Shelley, Victaulic, Atlanta, Ga. (AWWA) A. Steffan, Dresser Inc., Bradford, Pa. (AWWA) G. Tate, Viking Johnson/Crane, Hitchin, United Kingdom (AWWA) N. Thorgersen, Romac Industries Inc., Bothell, Wash. (AWWA) D.R. Wagner, Consultant, St. Louis, Mo. (AWWA) M. Zi

19、mmerle, Cascade Waterworks Manufacturing Company, Yorkville, Ill. (AWWA) The AWWA Standards Committee on Steel Pipe, which reviewed and approved this standard, had the following personnel at the time of approval: John H. Bambei Jr., Chair Dennis A. Dechant, Vice-Chair John L. Luka, Secretary General

20、 Interest Members J.H. Bambei Jr., Bambei Engineering Services, Arvada, Colo. (AWWA) W.R. Brunzell, Brunzell Associates Ltd., Skokie, Ill. (AWWA) Copyright 2017 American Water Works Association. All Rights Reserved. iv R.J. Card, Lockwood, Andrews & Newnam Inc., Houston, Texas (AWWA) R.L. Coffey, HD

21、R Engineering Inc., Omaha, Neb. (AWWA) S.N. Foellmi, Black & Veatch Corporation, Irvine, Calif. (AWWA) R.L. Gibson, Freese and Nichols Inc., Fort Worth, Texas (AWWA) M.D. Gossett,* HDR, Denver, Colo. (AWWA) M.B. Horsley,* Horsley Engineering LLC, Overland Park, Kan. (AWWA) R. Issa,* AECOM, McKinney,

22、 Texas (AWWA) R.A. Kufaas, Norske Corrosion & Inspection Services Ltd., Surrey, B.C., Canada (AWWA) J.L. Mattson, Corrosion Control Technologies, Sandy, Utah (AWWA) A. Murdock, CH2M, Salt Lake City, Utah (AWWA) R. Ortega,* Lockwood, Andrews & Newnam Inc., Houston, Texas (AWWA) E.S. Ralph, Standards

23、Engineer Liaison, AWWA, Denver, Colo. (AWWA) A.E. Romer, AECOM, Orange, Calif. (AWWA) J.R. Snow, MWH Americas, Denver, Colo. (AWWA) W.R. Whidden, Woolpert, Winter Park, Fla. (AWWA) Producer Members D.W. Angell, Standards Council Liaison, American Flow Control, Birmingham, Ala. (AWWA) S.A. Arnaout, F

24、orterra Pressure Pipe, Dallas, Texas (AWWA) H.H. Bardakjian, Consultant, Glendale, Calif. (AWWA) D.A. Dechant, Dechant Infrastructure Service, Aurora, Colo. (AWWA) V. DeGrande,* Ameron Water Transmission Group, Rancho Cucamonga, Calif. (AWWA) W.B. Geyer, Steel Plate Fabricators Associates, Lake Zuri

25、ch, Ill. (AWWA) B.D. Keil, Northwest Pipe Company, Draper, Utah (AWWA) J.L. Luka, American SpiralWeld Pipe Company, Columbia, S.C. (AWWA) R.D. Mielke,* Northwest Pipe Company, Raleigh, N.C. (AWWA) J. Olmos, Ameron International, Rancho Cucamonga, Calif. (AWWA) G.F. Ruchti,* Consultant, Punta Gorda,

26、Fla. (AWWA) B.P. Simpson,* American Cast Iron Pipe Company, Birmingham, Ala. (AWWA) C.C. Sundberg, Victaulic, Issaquah, Wash. (AWWA) D. Walker, Avid Protective Products LTD/Tnemec Company, Oakville, Ont., Canada (AWWA) J.A. Wise, Canus International Sales Inc., Surrey, B.C., Canada (AWWA) User Membe

27、rs L. Adams, US Bureau of Reclamation, Denver, Colo. (AWWA) * Alternate Liaison, nonvoting Copyright 2017 American Water Works Association. All Rights Reserved. v G.A. Andersen, New York City Bureau of Water Supply, Little Neck, New York (AWWA) B. Cheng, Metro Vancouver, Burnaby, B.C., Canada (AWWA)

28、 M.E. Conner, San Diego County Water Authority, San Diego, Calif. (AWWA) S. Hattan, Tarrant Regional Water District, Fort Worth, Texas (AWWA) T.J. Jordan,* Metropolitan Water District of Southern California, LaVerne, Calif. (AWWA) P.K. Karna, Tacoma Water, Tacoma, Wash. (AWWA) M. McReynolds, Metropo

29、litan Water District of Southern California, Oak Park, Calif. (AWWA) K.R. Parbhoo, Los Angeles Department of Water and Power, Los Angeles, Calif. (AWWA) M. Turney,* Denver Water, Denver, Colo. (AWWA) * Alternate Copyright 2017 American Water Works Association. All Rights Reserved. This page intentio

30、nally blank.vii Contents All AWWA standards follow the general format indicated subsequently. Some variations from this format may be found in a particular standard. SEC. PAGE SEC. PAGE Foreword I Introduction . ix I.A Background ix I.B History . ix I.C Acceptance . ix II Special Issues . x II.A Adv

31、isory Information on Product Application x II.B Chlorine and Chloramine Degradation of Elastomers x II.C Gasket Degradation Study . xi III Use of This Standard xi III.A Purchaser Options and Alternatives xi III.B Modification to Standard xii IV Major Revisions . xii V Comments . xiii Standard 1 Gene

32、ral 1.1 Scope 1 1.2 Purpose . 1 1.3 Application 1 2 References 2 3 Definitions . 4 4 Requirements 4.1 Permeation 7 4.2 Materials of Construction . 7 4.3 Design of Bolted Couplings. 9 4.4 Detailed Design and Manufacture . 10 4.5 Performance 12 4.6 Coatings 12 4.7 Installation 13 5 Verification 5.1 In

33、spection . 15 5.2 Tests 16 5.3 Nonconformance 17 6 Delivery 6.1 Marking 17 6.2 Packaging and Shipping 18 6.3 Affidavit of Compliance 18 Figures 1 Typical Straight Coupling . 5 2 Typical Coupling Configurations 6 Tables 1 Minimum Physical Properties of Gasket Material . 8 2 Minimum Center-Sleeve Leng

34、th . 10 3 Maximum Angular Deflection (no in-service movement) . 13 4 Pipe-End Diameter Tolerances 14 5 Recommended Centerline Gaps 15 Copyright 2017 American Water Works Association. All Rights Reserved. This page intentionally blank.ix Foreword This foreword is for information only and is not a par

35、t of ANSI*/AWWA C219. I. Introduction. I.A. Background. This standard describes bolted sleeve-type couplings, reducing or transition couplings, and flanged coupling adapters used to join plain-end pipe. It also includes materials of construction, inspection, and testing. I.B. History. The first edit

36、ion of ANSI/AWWA C219 was approved by the AWWA Board of Directors on June 23, 1991. Subsequent editions were approved on June 15, 1997, Jan. 21, 2001, Feb. 12, 2006, and Jan. 23, 2011. This edition was approved on Jan. 14, 2017. I.C. Acceptance. In May 1985, the US Environmental Protection Agency (U

37、SEPA) entered into a cooperative agreement with a consortium led by NSF International (NSF) to develop voluntary third-party consensus standards and a certification program for direct and indirect drinking water additives. Other members of the original consortium included the Water Research Foundati

38、on (formerly AwwaRF) and the Conference of State Health and Environmental Managers (COSHEM). The American Water Works Association (AWWA) and the Association of State Drinking Water Administrators (ASDWA) joined later. In the United States, authority to regulate products for use in, or in contact wit

39、h, drinking water rests with individual states. Local agencies may choose to impose requirements more stringent than those required by the state. To evaluate the health effects of products and drinking water additives from such products, state and local agencies may use various references, including

40、 1. Specific policies of the state or local agency. 2. Two standards developed under the direction of NSF : NSF/ANSI 60, Drinking Water Treatment ChemicalsHealth Effects, and NSF/ANSI 61, Drinking Water System ComponentsHealth Effects. * American National Standards Institute, 25 West 43rd Street, Fo

41、urth Floor, New York, NY 10036. Persons outside the United States should contact the appropriate authority having jurisdiction. NSF International, 789 North Dixboro Road, Ann Arbor, MI 48105. Copyright 2017 American Water Works Association. All Rights Reserved. x 3. Other references, including AWWA

42、standards, Food Chemicals Codex, Water Chemicals Codex,* and other standards considered appropriate by the state or local agency. Various certification organizations may be involved in certifying products in accor- dance with NSF/ANSI 61. Individual states or local agencies have authority to accept

43、or accredit certification organizations within their jurisdictions. Accreditation of certi- fication organizations may vary from jurisdiction to jurisdiction. Annex A, “Toxicology Review and Evaluation Procedures,” to NSF/ANSI 61 does not stipulate a maximum allowable level (MAL) of a contaminant fo

44、r substances not regulated by a USEPA final maximum contaminant level (MCL). The MALs of an unspecified list of “unregulated contaminants” are based on toxicity testing guidelines (noncarcinogens) and risk characterization methodology (carcinogens). Use of Annex A procedures may not always be identi

45、cal, depending on the certifier. ANSI/AWWA C219 does not address additives requirements. Users of this stan- dard should consult the appropriate state or local agency having jurisdiction in order to 1. Determine additives requirements, including applicable standards. 2. Determine the status of certi

46、fications by parties offering to certify products for contact with, or treatment of, drinking water. 3. Determine current information on product certification. II. Special Issues. II.A. Advisory Information on Product Application. Bolted sleeve-type couplings have been used for joining plain-end pip

47、e since the latter part of the nineteenth century. Currently, there are several manufacturers that produce these couplings. Though details differ, couplings of this type work the same way and have similar components: a center sleeve (sometimes called a “middle ring”), end rings (sometimes called “fo

48、llowers”), and threaded fasteners (bolts and nuts) that when tightened, pull the end rings together. These components compress elastomeric gaskets in the space formed between the end rings, center sleeve, and pipes being joined, thereby sealing the coupling-and-pipe combination. II.B. Chlorine and C

49、hloramine Degradation of Elastomers. The selection of materials is critical for water service and distribution piping in locations where there is a possibility that elastomers will be in contact with chlorine or chloramines. Documented research has shown that elastomers such as gaskets, seals, valve seats, and * Both publications available from National Academy of Sciences, 500 Fifth Street, NW, Washington, DC 20001. Copyright 2017 American Water Works Association. All Rights Reserved. xi encapsulations may be degraded when exposed to chlorine or chloram