ANSI AWWA C503-2005 Wet-Barrel Fire Hydrants《湿筒消防栓》.pdf

1、The Authoritative Resource on Safe WaterSMANSI/AWWA C503-05(Revision of ANSI/AWWA C503-97)AWWA StandardEffective date: Jan. 1, 2006.First edition approved by AWWA Board of Directors July 7, 1959.This edition approved June 12, 2005.Approved by American National Standards Institute Aug. 19, 2005.Wet-B

2、arrel Fire HydrantsAdvocacyCommunicationsConferencesEducation and TrainingH17012 Science and TechnologySections6666 West Quincy AvenueDenver, CO 80235-3098T 800.926.7337www.awwa.orgCopyright American Water Works Association Provided by IHS under license with AWWA Not for ResaleNo reproduction or net

3、working permitted without license from IHS-,-,-iiAWWA StandardThis document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standardsdescribe minimum requirements and do not contain all of the engineering and administrative information normallycontained in spe

4、cifications. The AWWA standards usually contain options that must be evaluated by the user of thestandard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWApublication of a standard does not constitute endorsement of any product or product type,

5、nor does AWWA test, certify,or approve any product. The use of AWWA standards is entirely voluntary. AWWA standards are intended to represent aconsensus of the water supply industry that the product described will provide satisfactory service. When AWWA revisesor withdraws this standard, an official

6、 notice of action will be placed on the first page of the classified advertisingsection of Journal AWWA. The action becomes effective on the first day of the month following the month of JournalAWWA publication of the official notice.American National StandardAn American National Standard implies a

7、consensus of those substantially concerned with its scope and provisions. AnAmerican National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. Theexistence of an American National Standard does not in any respect preclude anyone, whether that person hasa

8、pproved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or proceduresnot conforming to the standard. American National Standards are subject to periodic review, and users are cautionedto obtain the latest editions. Producers of goods made in conformity w

9、ith an American National Standard areencouraged to state on their own responsibility in advertising and promotional materials or on tags or labels that thegoods are produced in conformity with particular American National Standards.CAUTION NOTICE: The American National Standards Institute (ANSI) app

10、roval date on the front cover of this standardindicates completion of the ANSI approval process. This American National Standard may be revised or withdrawn atany time. ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than fiveyears from the date o

11、f publication. Purchasers of American National Standards may receive current information on allstandards by calling or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York,NY 10036; (212) 642-4900.Science and TechnologyAWWA unites the entire water community

12、by developing and distributing authoritative scientific and technologicalknowledge. Through its members, AWWA develops industry standards for products and processes that advance publichealth and safety. AWWA also provides quality improvement programs for water and wastewater utilities.All rights res

13、erved. No part of this publication may be reproduced or transmitted in any form or by any means, electronicor mechanical, including photocopy, recording, or any information or retrieval system, except in the form of briefexcerpts or quotations for review purposes, without the written permission of t

14、he publisher. Copyright 2006 by American Water Works AssociationPrinted in USACopyright American Water Works Association Provided by IHS under license with AWWA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-iiiCommittee PersonnelThe AWWA Standards Committee on Fi

15、re Hydrants, which reviewed and approved thisstandard, had the following personnel at the time of approval:Nelson O. Mejia, ChairLarry R. Dunn, SecretaryGeneral Interest MembersE.E. Arasmith, Arasmith Consulting Resource, Albany, Ore. (AWWA)G.E. Laverick, Underwriters Laboratories Inc., Northbrook,

16、Ill. (UL)B. Shugarman,*Underwriters Laboratories Inc., Northbook, Ill. (UL)E.F. Straw, Insurance Services Office Inc., Duluth, Ga. (ISO)J.M. Stubbart,Standards Engineer Liaison, AWWA, Denver, Colo. (AWWA)M.P. Yoke, Anniston, Ala. (AWWA)S. Ziobro, FM Approvals, West Glocester, R.I. (AWWA)Producer Mem

17、bersJ. Bottenfield, Clow Valve Company, Oskaloosa, Iowa (AWWA)L.R. Dunn, US Pipe ANSI/AWWA C603, Installation ofAsbestosCement Pressure Pipe; and AWWA Manual M17, Installation, Field Testing,and Maintenance of Fire Hydrants.Hydrants of steel-pipe risers and angle-valve construction are not covered i

18、n thisstandard.Copyright American Water Works Association Provided by IHS under license with AWWA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-2 AWWA C503-05Sec. 1.2 PurposeThe purpose of this standard is to provide purchasers, manufacturers, andsuppliers with t

19、he minimum requirements for wet-barrel fire hydrants, includingmaterials, design, inspection, testing, marking, and shipping requirements.Sec. 1.3 ApplicationThis standard can be referenced in requirements for purchasing and receivingwet-barrel fire hydrants and can be used as a guide for inspecting

20、 and testing wet-barrel fire hydrants. The stipulations of this standard apply when this document hasbeen referenced and only to wet-barrel fire hydrants used in water-supply service.SECTION 2: REFERENCESThis standard references the following documents. In their latest editions, theyform a part of t

21、his standard to the extent specified within the standard. In any caseof conflict, the requirements of this standard shall prevail.ANSI*/AWWA C110/A21.10American National Standard for Ductile-Ironand Gray-Iron Fittings for Water.ANSI/AWWA C111/A21.11American National Standard for Rubber-GasketJoints

22、for Ductile-Iron Pressure Pipe and Fittings.ANSI/AWWA C151/A21.51American National Standard for Ductile-IronPipe, Centrifugally Cast, for Water or Other Liquids.ANSI/AWWA C502Dry-Barrel Fire Hydrants.ANSI/AWWA C550Protective Epoxy Interior Coatings for Valves andHydrants.ANSI/AWWA C600Installation o

23、f Ductile-Iron Water Mains and TheirAppurtenances.ANSI/AWWA C603Installation of AsbestosCement Pressure Pipe.ASMEB18.2.1Square and Hex Bolts and Screws, Inch Series.ASME B18.2.2Square and Hex Nuts (Inch Series).*American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 1

24、0036.American Society of Mechanical Engineers, 3 Park Avenue, New York, NY 10016.Copyright American Water Works Association Provided by IHS under license with AWWA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-WET-BARREL FIRE HYDRANTS 3ASTM*A48Standard Specificat

25、ion for Gray Iron Castings.ASTM A53Standard Specification for Pipe, Steel, Black and Hot-Dipped,Zinc-Coated, Welded and Seamless.ASTM A126Standard Specification for Gray Iron Castings for Valves,Flanges, and Pipe Fittings.ASTM A307Standard Specification Carbon Steel Bolts and Studs, 60,000 psiTensil

26、e Strength.ASTM A351/351MStandard Specification for Castings, Austenitic, Austen-itic-Ferritic (Duplex), for Pressure-Containing Parts.ASTM A395Standard Specification for Ferritic Ductile Iron Pressure-Retain-ing Castings for Use at Elevated Temperatures.ASTM A536Standard Specification for Ductile I

27、ron Castings.ASTM A575Standard Specification for Steel Bars, Carbon, MerchantQuality, M-Grades.ASTM A576Standard Specification for Steel Bars, Carbon, Hot-Wrought,Special Quality.ASTM B16Standard Specification for Free-Cutting Brass Rod, Bar, andShapes for Use in Screw Machines.ASTM B62Standard Spec

28、ification for Composition Bronze or Ounce MetalCastings.ASTM B124Standard Specification for Copper and Copper Alloy ForgingRod, Bar, and Shapes.ASTM B138Standard Specification for Manganese Bronze Rod, Bar, andShapes.ASTM B148Standard Specifications for Aluminum-Bronze Sand Castings.ASTM B154Standar

29、d Test Method for Mercurous Nitrate Test for Copperand Copper Alloys.ASTM B283Standard Specification for Copper and Copper-Alloy DieForgings (Hot-Pressed).ASTM B584Standard Specification for Copper Alloy Sand Castings forGeneral Applications.ASTM B763Standard Specification for Copper Alloy Sand Cast

30、ings for ValveApplication.*ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428.Copyright American Water Works Association Provided by IHS under license with AWWA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-4 AWWA C503-05ASTM D2000Standard Cla

31、ssification System for Rubber Products inAutomotive Applications.AWWA Manual M17Installation, Field Testing, and Maintenance of FireHydrants.Fed. Spec.*HH-P-106dPacking, Flax or Hemp.Fed. Spec. TT-P-664Primer Coating, Alkyd, Wood and Ferrous Metal.MIL-P-5514Hydraulic General Specifications for Packi

32、ngs, Installations andGland Design.SECTION 3: DEFINITIONSThe following definitions shall apply in this standard:1. Bury section: The lower portion (belowground section) of a wet-barrelhydrant. This portion usually consists of the midsection (or spool) and the buryelbow. This is one of two major sect

33、ions that make up wet-barrel hydrants.2. Cast iron: Includes gray iron and ductile iron.3. Cosmetic defect: A blemish that has no effect on the ability of thecomponent to meet the structural design and production test requirements of thisstandard. Should the blemish or the activity of plugging, weld

34、ing, grinding, orrepairing of such blemish cause the component to fail these requirements, theblemish shall be considered a structural defect.4. Flange connection: The bolted connection used to fasten the hydrant topsection (whether a single-piece or two-piece unit) to the bury section.5. Hydrant as

35、sembly: The hydrant top section and bury section assembledat the bolted flange connection.6. Hydrant barrel: The portion of a two-piece hydrant top section(aboveground) that connects the hydrant head and the bury section.7. Hydrant head: When the hydrant top section is constructed as atwo-piece unit

36、, the hydrant head is the portion containing the valve mechanism andoutlet nozzles.*Federal Specification available from Naval Publications and Forms Center, 5801 Tabor Avenue,Philadelphia, PA 19120.Military Specifications and Standards available from Naval Publications and Forms Center, 5801Tabor A

37、venue, Philadelphia, PA 19120.Copyright American Water Works Association Provided by IHS under license with AWWA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-WET-BARREL FIRE HYDRANTS 58. Hydrant top section: The upper portion (aboveground section) of awet-barrel

38、 hydrant. This is one of two major sections that make up wet-barrelhydrants.9. Manufacturer: The party that manufactures, fabricates, or producesmaterials or products.10. Purchaser: The person, company, or organization that purchases anymaterials or work to be performed.11. Structural defect: A flaw

39、 that causes the component to fail the structuraldesign or test requirements of this standard. This includes, but is not limited to,imperfections that result in leakage through the walls of a casting, failure to meet theminimum wall thickness requirement, or failure to meet production tests.SECTION

40、4: REQUIREMENTSSec. 4.1 PermeationThe selection of materials is critical for water service and distribution piping inlocations where there is likelihood the hydrant will be exposed to significantconcentrations of pollutants comprised of low molecular weight petroleum productsor organic solvents or t

41、heir vapors. Research has documented that pipe materials,such as polyethylene, polybutylene, polyvinyl chloride, and asbestoscement, andelastomers, such as used in jointing gaskets and packing glands, are subject topermeation by lower molecular weight organic solvents or petroleum products. If awate

42、r pipe and hydrant must pass through such a contaminated area or an areasubject to contamination, consult with the manufacturer regarding permeation ofpipe walls, jointing materials, etc., before selecting materials for use in that area.Sec. 4.2 Data to Be Supplied by the PurchaserIf the purchaser h

43、as any special requirements, such as unusual connections,nozzles, nozzle threads, caps, or operating nuts, the purchaser shall supply thenecessary drawings, samples, or both to the manufacturer.Sec. 4.3 Drawings or Data to Be Supplied by the Manufacturer4.3.1 Catalog and maintenance data. After purc

44、hase, the manufacturer shall,when required, supply catalog data (including illustrations and a schedule of partsCopyright American Water Works Association Provided by IHS under license with AWWA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-6 AWWA C503-05and the

45、materials from which they are made) in sufficient detail to serve as a guidefor the assembly and disassembly of the hydrant, as well as for ordering repair parts.The manufacturer, when required, shall also supply maintenance informationnecessary for keeping the hydrant in proper working condition.4.

46、3.2 Net weight. When required, the manufacturer shall supply a statementthat lists the total net assembled weight of the hydrant top section and completehydrant assembly for each size of hydrant ordered.4.3.3 Drawings. When required, the manufacturer shall submit two sets ofdrawings showing principa

47、l dimensions, construction details, and materials forconsideration by the purchaser. The purchaser shall return one set of drawingsindicating acceptance to the manufacturer. No work shall be done or hydrantssupplied that do not conform with these drawings. If required by the purchaser, themanufactur

48、er shall supply additional copies of the drawings.Sec. 4.4 MaterialsMaterials shall comply with the requirements of the Safe Drinking Water Actand other federal requirements. 4.4.1 General. Materials designated in this standard, when used in hydrantsproduced according to this standard, shall conform

49、 to the referenced standardsdesignated for each material listed.4.4.2 Physical and chemical properties of components. The physical and chem-ical requirements of hydrant components shall be as required by the AWWA, ANSI,ASTM, or other standards to which reference is made.4.4.3 Gray iron. Gray cast iron shall conform to ANSI/AWWA C110/A21.10; ASTM A126, C