ANSI AWWA C714-2013 Cold-Water Meters for Residential Fire Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Home (First Edition)《一户和两户家庭住房和预制装配式家用房屋的住宅消防喷洒灭火系统》.pdf

1、 AWWA Standard SM Cold-Water Meters for Residential Fire Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes Effective date: Dec. 1, 2013. This first edition approved by AWWA Board of Directors June 9, 2013. Approved by American National Standards Institute Sept. 9, 2013. ANSI

2、/AWWA C714-13 (First Edition) Copyright 2013 American Water Works Association. All Rights Reserved. ii AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering

3、 and administrative information normally contained in specifications. The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA pub- lication of a standard doe

4、s not constitute endorsement of any product or product type, nor does AWWA test, certify, or approve any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any applicable law, regulation, or codes of any governmental authori

5、ty. AWWA standards are intended to represent a consensus of the water supply industry that the product described will provide satisfactory service. When AWWA revises or withdraws this standard, an official notice of action will be placed on the first page of the Official Notice section of Journal -

6、American Water Works Association. The action becomes effective on the first day of the month following the month of Journal - American Water Works Association publication of the official notice. American National Standard An American National Standard implies a consensus of those substantially conce

7、rned with its scope and provisions. An American National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether that person has ap - proved the standard or not, fro

8、m manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standard. American National Standards are subject to periodic review, and users are cautioned to obtain the latest editions. Producers of goods made in conformity with an American National Stand

9、ard are encour - aged to state on their own responsibility in advertising and promotional materials or on tags or labels that the goods are produced in conformity with particular American National Standards. Caution n oti Ce : The American National Standards Institute (ANSI) approval date on the fro

10、nt cover of this standard indicates completion of the ANSI approval process. This American National Standard may be revised or withdrawn at any time. ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of ANSI approval. P

11、urchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036; (212) 642-4900, or emailing infoansi.org. ISBN-13, print: 978-1-58321-965-2 eISBN-13, elec

12、tronic: 978-1-61300-244-5 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information or retrieval system, except in the form of brief excerpts or quotations for review pur

13、poses, without the written permission of the publisher. Copyright 2013 by American Water Works Association Printed in USA Copyright 2013 American Water Works Association. All Rights Reserved. iii The AWWA Standards Subcommittee on Cold-Water Meters for Residential Fire Sprinkler Applications, which

14、developed this standard, had the following personnel at the time: Thomas A. Kelly Jr., Chair M.L. Aigen, Boston Water and Sewer Commission, Roxbury, Mass. (NEWWA) R.A. Barillas, Badger Meter, Milwaukee, Wis. (AWWA) S. Bartram, Elster AMCO Water LLC, Ocala, Fla. (AWWA) T.D. Bianchi, Neptune Technolog

15、y Group Inc., Tallassee, Ala. (AWWA) M.C. Bowen, City of Columbus, Division of Water, Columbus, Ohio (AWWA) T. Butler, Itron, Silver Springs, Fla. (AWWA) G.H. De Jarlais, Badger Meter, Milwaukee, Wis. (AWWA) A. Dudley, Itron, Waseca, Minn. (AWWA) W.F. Dunnill, Consolidated Utility District of Ruther

16、ford County, Murfreesboro, Tenn. (AWWA) A. Hendey Sr., Hendey Meter, Beaumont, Calif. (AWWA) J.E. Jackson, Sensus Metering Systems, Texarkana, Texas (AWWA) M.J. Kebles, Water Industry Consultant, Las Vegas, Nev. (AWWA) K.J. Kelly, Kevin Kelly PE PC, Pine Bush, N.Y. (AWWA) T.A. Kelly Jr., Washington

17、Suburban Sanitary Commission, Laurel, Md. (AWWA) R.N. Koch, Master Meter Inc., Pittsburgh, Pa. (AWWA) M.S. Krause, Desert Water Agency, Palm Springs, Calif. (AWWA) D.J. Kullmann, Neptune Technology Group Inc., Marietta, Ga. (AWWA) M. Laird, Metron-Farnier LLC, Boulder, Colo. (AWWA) G.E. Laverick, Un

18、derwriters Laboratories Inc., Northbrook, Ill. (UL) S.H. Seehoffer, Master Meter Inc., Mansfield, Texas (AWWA) M. Shamley, Metron-Farnier LLC, Boulder, Colo. (AWWA) S.M. Stevanus, California Water Service Company, Torrance, Calif. (AWWA) S.M. Swanson, Sensus Technologies Inc., Uniontown, Pa. (AWWA)

19、M.A. Thomas, Mueller Systems, Cleveland, N.C. (AWWA) A.M. Watson, Elster AMCO Water LLC, Ocala, Fla. (AWWA) Committee Personnel Copyright 2013 American Water Works Association. All Rights Reserved. iv The AWWA Standards Committee on Water Meters, which reviewed and approved this standard, had the fo

20、llowing personnel at the time of approval: Michael J. Kebles, Chair Thomas Gwynn, Secretary* General Interest Members D. Faber, Faber Consulting, Columbus, Ind. (AWWA) R.C. Graff, Poway, Calif. (AWWA) P.A. Hayes, Irvine, Calif. (AWWA) D.E. Hood, M.E. Simpson Company Inc., Valparaiso, Ind. (AWWA) M.C

21、. Johnson, Utah State University, Logan, Utah (AWWA) M.J. Kebles, Water Industry Consultant, Las Vegas, Nev. (AWWA) F.S. Kurtz, Standards Engineer Liaison, AWWA, Denver, Colo. (AWWA) M.L. Mastic, MARS Company, Ocala, Fla. (AWWA) R.A. Richter, National Institute of Standards and Technology, Gaithersb

22、urg, Md. (AWWA) F.S. Salser Jr., Floyd S. Salser Jr. meter types outside of the scope of these AWWA standards will not conform to ANSI/AWWA C714. I.B. History. This standard is the first edition for meters used in this application. It was developed by the AWWA Standards Subcommittee on Cold-Water Me

23、ters for Residential Fire Sprinkler Applications, and it was approved by the AWWA Standards Committee on Water Meters. This first edition of the standard was approved by the AWWA Board of Directors on June 9, 2013. I.C. Acceptance. In May 1985, the US Environmental Protection Agency (USEPA) entered

24、into a cooperative agreement with a consortium led by NSF International (NSF) to develop voluntary third-party consensus standards and a certification program for direct and indirect drinking water additives. Other members of the original consortium included the Water Research Foundation (formerly A

25、wwaRF), and the Conference of State Health and Environmental Managers (COSHEM). The American Water Works Association (AWWA) and the Association of State Drinking Water Administrators (ASDWA) joined later. In the United States, authority to regulate products for use in, or in contact with, drinking w

26、ater rests with individual states. Local agencies may choose to impose requirements more stringent than those required by the state. To evaluate the health * American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036. National Fire Protection Association, 1 Batterym

27、arch Park, Quincy, MA 02169. Persons outside the United States should contact the appropriate authority having jurisdiction. Copyright 2013 American Water Works Association. All Rights Reserved. x effects of products and drinking water additives from such products, state and local agencies may use v

28、arious references, including 1. An advisory program formerly administered by USEPA, Office of Drinking Water, discontinued on Apr. 7, 1990. 2. Specific policies of the state or local agency. 3. Two standards developed under the direction of NSF, NSF*/ANSI 60, Drinking Water Treatment ChemicalsHealth

29、 Effects, and NSF/ANSI 61, Drinking Water System ComponentsHealth Effects. 4. Other references, including AWWA standards, Food Chemicals Codex, Water Chemicals Codex, and other standards considered appropriate by the state or local agency. Various certification organizations may be involved in certi

30、fying products in accor- dance with NSF/ANSI 61. Individual states or local agencies have authority to accept or accredit certification organizations within their jurisdiction. Accreditation of certi- fication organizations may vary from jurisdiction to jurisdiction. Annex A, “Toxicology Review and

31、Evaluation Procedures,” to NSF/ANSI 61 does not stipulate a maximum allowable level (MAL) of a contaminant for substances not regulated by a USEPA final maximum contaminant level (MCL). The MALs of an unspecified list of “unregulated contaminants” are based on toxicity testing guidelines (noncarcino

32、gens) and risk characterization methodology (carcinogens). Use of Annex A procedures may not always be identical, depending on the certifier. In an alternative approach to inadvertent drinking water additives, some jurisdic- tions (including California, Maryland, and Vermont, at the time of this wri

33、ting) are calling for reduced lead limits for materials in contact with potable water. Various third-party certifiers have been assessing products against these lead content criteria, and a new ANSI-approved national standard, NSF/ANSI 372, Drinking Water System ComponentsLead Content, was published

34、 in 2010. On Jan. 4, 2011, legislation was signed revising the definition for lead free within the Safe Drinking Water Act (SDWA) as it pertains to “pipe, pipe fittings, plumbing fittings, and fixtures.” The changes are due to go into effect on Jan. 4, 2014. In brief, the new provisions to the SDWA

35、require that these products meet a weighted average lead content of not more than 0.25 percent. * NSF International, 789 N. Dixboro Road, Ann Arbor, MI 48105. Both publications available from National Academy of Sciences, 500 Fifth Street NW, Washington, DC 20001. Copyright 2013 American Water Works Association. All Rights Reserved.