ANSI AWWA F110-2016 Ultraviolet Disinfection Systems for Drinking Water.pdf

1、AWWA Standard SM Ultraviolet Disinfection Systems for Drinking Water Effective date: Jan. 1, 2017. This first edition approved by AWWA Board of Directors June 10, 2012. Approved by American National Standards Institute July 26, 2012. ANSI/AWWA F110-16 (Revision of ANSI/AWWA F110-12) Copyright 2017 A

2、merican Water Works Association. All Rights Reserved. ii AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering and administrative information normally conta

3、ined in specifications. The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA pub- lication of a standard does not constitute endorsement of any product or

4、 product type, nor does AWWA test, certify, or approve any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any applicable law, regulation, or code of any governmental authority. AWWA standards are intended to represent a

5、consensus of the water industry that the product described will provide satisfactory ser- vice. When AWWA revises or withdraws this standard, an official notice of action will be placed on the first page of the Official Notice section of Journal American Water Works Association. The action becomes e

6、ffective on the first day of the month following the month of Journal American Water Works Association publication of the official notice. American National Standard An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An American National

7、 Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether that person has ap - proved the standard or not, from manufacturing, marketing, purchasing, or using product

8、s, processes, or procedures not conforming to the standard. American National Standards are subject to periodic review, and users are cautioned to obtain the latest editions. Producers of goods made in conformity with an American National Standard are encour - aged to state on their own responsibili

9、ty in advertising and promotional materials or on tags or labels that the goods are produced in conformity with particular American National Standards. Caution n oti Ce : The American National Standards Institute (ANSI) approval date on the front cover of this standard indicates completion of the AN

10、SI approval process. This American National Standard may be revised or withdrawn at any time. ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of publication. Purchasers of American National Standards may receive curre

11、nt information on all standards by calling or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036; 212.642.4900; or emailing infoansi.org. ISBN-13, print: 978-1-62576-201-6 eISBN-13, electronic: 978-1-61300-403-6DOI: http:/dx.doi.org/10.12999/AWWA

12、.F110.16 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information or retrieval system, except in the form of brief excerpts or quotations for review purposes, without th

13、e written permission of the publisher. Copyright 2017 by American Water Works Association Printed in USA hours of work by your fellow water professionals. Revenue from the sales of this AWWA material supports ongoing product development. Unauthorized distribution, either electronic or photocopied, i

14、s illegal and hinders AWWAs mission to support the water community. This AWWA content is the product of thousands of Copyright 2017 American Water Works Association. All Rights Reserved. iii Committee Personnel The AWWA Standards Committee on Ultraviolet Disinfection, which reviewed and approved thi

15、s standard, had the following personnel at the time: Christine A. Cotton, Chair General Interest Members J.J. Christensen, HDR Engineering, Austin, Texas (AWWA) C.A. Cotton, ARCADIS, Los Angles, Calif. (AWWA) S. Farabaugh, Forsgren Associates, Englewood, Colo. (AWWA) R.A. Hulsey, Black and Veatch, K

16、ansas City, Mo. (AWWA) K. Kohut, Associated Engineering, Vancouver, B.C., Canada (AWWA) E.D. Mackey,* Brown and Caldwell, Walnut Creek, Calif. (AWWA) J.P. Malley, University of New Hampshire, Durham, N.H. (AWWA) T.J. McCandless, Standards Engineer Liaison, AWWA, Denver, Colo. (AWWA) N.E. McTigue, St

17、andards Council Liaison, AWWA, Denver, Colo. (AWWA) J.A. Oppenheimer, MWH, Arcadia, Calif. (AWWA) C. Schulz, CDM Smith Inc., Denver, Colo. (AWWA) P.D. Swaim, CH2M, Englewood, Colo. (AWWA) M.T. Valade, Hazen and Sawyer, Boston, Mass. (AWWA) Producer Members K. Bircher, Calgon Carbon Corporation, Mark

18、ham, Ont., Canada (AWWA) A.D. Festger, Trojan Technologies, Tucson, Ariz. (AWWA) O. Lawal, Aquionics Inc., Erlanger, Ky. (AWWA) P.B. Posy, Atlantium Technologies, Har Tuv Industrial Park, Israel (AWWA) User Members G.S. Ajy, River To Tap, Roswell, Ga. (AWWA) J.A. Fleming, Greater Cincinnati Water Wo

19、rks, Cincinnati, Ohio (AWWA) P. Lill, Poughkeepsie WTP, Poughkeepsie, N.Y. (AWWA) J.A. Nilson, Seattle Public Utilities, Seattle, Wash. (AWWA) S.W. Paxman, Weber Basin Water Conservation District, Layton, Utah (AWWA) W.J. Soucie, Central Lake County Joint Action Water Agency, Lake Bluff, Ill. (AWWA)

20、 * Alternate Liaison, nonvoting Copyright 2017 American Water Works Association. All Rights Reserved. This page intentionally blank. Copyright 2017 American Water Works Association. All Rights Reserved. v Contents All AWWA standards follow the general format indicated subsequently. Some variations f

21、rom this format may be found in a particular standard. SEC. PAGE SEC. PAGE Foreword I Introduction vii I.A Background . vii I.B History vii I.C Acceptance vii II Special Issues. . viii III Use of This Standard ix III.A Purchaser Options and Alternatives ix III.B Laying Length ix III.C Testing . ix I

22、II.D Modifications to Standard ix IV Major Revisions . x V Comments x Standard 1 General 1.1 Scope 1 1.2 Purpose . 1 1.3 Application 1 2 References 2 3 Definitions . 2 4 Requirements 4.1 Required Equipment . 5 4.2 Data to Be Provided by Purchaser . 6 4.3 Data to Be Provided by the Manufacturer 8 4.4

23、 Materials . 11 4.5 General Design . 12 4.6 Validation 14 5 Verification 5.1 Factory Testing 15 5.2 Installation 15 5.3 Manuals 17 6 Delivery 6.1 Packaging 18 6.2 Shipping, Handling, and Storage 18 6.3 Notice of Nonconformance . 18 6.4 Affidavit of Compliance 18 Table 1 Feedwater Quality Data to Be

24、Provided by Purchaser . 7 Copyright 2017 American Water Works Association. All Rights Reserved. This page intentionally blank. Copyright 2017 American Water Works Association. All Rights Reserved. vii Foreword This foreword is for information only and is not a part of ANSI*/AWWA F110. I. Introductio

25、n. I.A. Background. Ultraviolet (UV) disinfection systems have gained increased acceptance for use in water treatment plants based on information that UV disinfection could cost-effectively inactivate Cryptosporidium. In addition, the Long T erm 2 Enhanced Surface Water Treatment Rule (LT2ESWTR) has

26、 recognized UV disinfection as a best available technology for meeting the requirements of the rule. I.B. History. The need for a standard addressing UV disinfection systems was recognized by the American Water Works Association (AWWA) in November 2005. The committee was appointed for the task of st

27、andardization, and at the first inaugural meeting in June 2006, a committee was formed to develop a standard. The first edition was approved by the AWWA Board of Directors on June 10, 2012. This edition was approved on June 19, 2016. I.C. Acceptance. In May 1985, the US Environmental Protection Agen

28、cy (USEPA) entered into a cooperative agreement with a consortium led by NSF International (NSF) to develop voluntary third-party consensus standards and a certification program for direct and indirect drinking water additives. Other members of the original consortium included the Water Research Fou

29、ndation (formerly AwwaRF) and the Conference of State Health and Environmental Managers (COSHEM). The American Water Works Association (AWWA) and the Association of State Drinking Water Administrators (ASDWA) joined later. In the United States, authority to regulate products for use in, or in contac

30、t with, drinking water rests with individual states. Local agencies may choose to impose requirements more stringent than those required by the state. To evaluate the health effects of products and drinking water additives from such products, state and local agencies may use various references, incl

31、uding 1. Specific policies of the state or local agency. 2. Two standards developed under the direction of NSF : NSF/ANSI 60, Drinking Water Treatment ChemicalsHealth Effects, and NSF/ANSI 61, Drinking Water System ComponentsHealth Effects. * American National Standards Institute, 25 West 43rd Stree

32、t, Fourth Floor, New York, NY 10036. Persons outside the United States should contact the appropriate authority having jurisdiction. NSF International, 789 North Dixboro Road, Ann Arbor, MI 48105. Copyright 2017 American Water Works Association. All Rights Reserved. viii 3. Other references, includi

33、ng AWWA standards, Food Chemicals Codex, Water Chemical Codex,* and other standards appropriate to the state or local agency. Various certification organizations may be certifying products in accordance with NSF/ANSI 61. Individual states or local agencies have authority to accept or accredit certif

34、ication organizations within their jurisdictions. Accreditation of certification organizations may vary from jurisdiction to jurisdiction. Annex A, “Toxicology Review and Evaluation Procedures,” to NSF/ANSI 61 does not stipulate a maximum allowable level (MAL) of a contaminant for substances not reg

35、ulated by a USEPA final maximum contaminant level (MCL). The MALs of an unspecified list of “unregulated contaminants” are based on toxicity testing guidelines (noncarcinogens) and risk characterization methodology (carcinogens). Use of Annex A procedures may not always be identical, depending on th

36、e certifier. ANSI/AWWA F110 does not address additives requirements. Therefore, users of this standard shall consult the appropriate state or local agency having jurisdiction in order to 1. Determine additives requirements, including applicable standards. 2. Determine the status of certification by

37、all parties offering to certify prod- ucts for contact with, or treatment of, drinking water. 3. Determine current information on product certification. II. Special Issues. Conditions under which the UV disinfection system is to be operated must be evaluated carefully by the purchasers. The evaluati

38、on must include the determination of the hydraulic characteristics of the system in which the lamps will be installed and the electrical circuits required for the operation of the lamps, including the maximum and static differential pressures across the lamp and the range of flow through the UV syst

39、em under the most adverse operating conditions. Sensors (UV intensity and UV transmittance) are critical components for mak- ing UV disinfection a credible technology for municipal drinking water. For all sen- sors, both the frequency and specificity of calibration may vary by location and UV manufa

40、cturer. In designing UV facilities and specifying UV equipment, accessible, easy-to-use sensor calibration routines should be highlighted as part of any basic instrumentation package. Small changes in transmittance in low-UV-absorbing waters can significantly change UV dose delivery; where ultraviol

41、et transmittance (UVT) monitors are used as part of verifying adequate dose delivery, it is recommended the * Both publications available from National Academy of Sciences, 500 Fifth Street, NW, Washington, DC 20001. Copyright 2017 American Water Works Association. All Rights Reserved. ix producer c

42、onsider tightening UVT error limits above the minimum standard where UVT is high (e.g., 94 percent). III. Use of This Standard. It is the responsibility of the user of an AWWA standard to determine that the products described in that standard are suitable for use in the particular application being

43、considered. III.A. Purchaser Options and Alternatives. The following information shall be provided by the purchaser: 1. Standard usedthat is, ANSI/AWWA F110, Ultraviolet Disinfection Systems for Drinking Water, of latest revision. 2. Equipment requirements (Sec. 4.1). 3. Request for validation statu

44、s or an executive summary of the validation report (Sec. 4.3.5.2). 4. Details of other federal, state or provincial, and local requirements (Sec. 4.4.1). 5. Whether compliance with NSF/ANSI 61, Drinking Water System ComponentsHealth Effects, is not required (Sec. 4.4.1.1). 6. Request for factory tes

45、t results (Sec. 5.1.1.2). 7. Request for shop inspection by the purchaser (Sec. 5.1.1.3). 8. Request for on-site field representative (Sec. 5.2.2). 9. Request for a supplier check of equipment for correct installation and func- tion (Sec. 5.2.3). 10. Request for a required number of training materia

46、ls (Sec. 5.2.5.2). 11. Specify acceptance testing time requirements (Sec. 5.2.6). 12. Request storage requirements (Sec. 6.2.3). III.B. Laying Length. There is not a standard laying length for UV disinfection systems and because of this, interchangeability between various manufacturers may not be po

47、ssible without modification to the existing piping system. The purchaser is cautioned to obtain this information from the manufacturers for verification prior to purchase (Sec. 4.3.2.4). III.C. Testing. This standard requires the manufacturer to have third-party validation testing conducted on a ful

48、ly assembled system. If the purchaser desires that an additional validation test be conducted on the installed, fully assembled system, this requirement should be specified in the purchase documents (Sec. 4.6). III.D. Modifications to Standard. Any modification to the provisions, definitions, or ter

49、minology in this standard must be provided by the purchaser. Copyright 2017 American Water Works Association. All Rights Reserved. x I V. Major Revisions. Major revisions made to the standard in this edition include the following: 1. Manufacturer reporting requirements prior to fabrication and startup were removed. 2. Flow to waste provisions were removed (Sec. 5.2.1). 3. Double block and bleed valve requirements were removed (Sec. 5.2.1.2). 4. Personal protection and mercury spill protocol requirements were removed from Sec. 5.3. V. Comments. If y