ANSI C136.17-1997 Roadway Lighting Equipment- Enclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity- Discharge Lamps-Mechanical Interchangeability of Refractors《道路.pdf

1、 The Institute of Electrical and Electronics Engineers, Inc.345 East 47th Street, New York, NY 10017-2394, USACopyright 1997 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 1997. Printed in the United States of America.ISBN 1-55937-930-8No part of this pu

2、blication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher.ANSI C136.17-1997(Revision of ANSI C136.17-1985)American National Standard for Roadway Lighting EquipmentEnclosed Side-Mounted Luminaires for Horizontal-Burn

3、ing High-Intensity-Discharge LampsMechanical Interchangeability of RefractorsSponsorAccredited Standards Committee on Roadway Lighting Equipment, C136Accredited by theAmerican National Standards InstituteSecretariatThe Institute of Electrical and Electronics Engineers, Inc.Approved 30 April 1997Amer

4、ican National Standards InstituteAbstract:The dimensional features and the material of refractors as described in ANSI C136.14-1988, American National Standard for Roadway Lighting EquipmentEnclosed Side-MountedLuminaires for Horizontal-Burning High-Intensity Discharge Lamps, are covered.Keywords:me

5、chanical interchangeability, refractors, side-mounted luminairesCopyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-IEEE Standardsdocuments are developed within

6、 the IEEE Societies and the Standards Coordinat-ing Committees of the IEEE Standards Board. Members of the committees serve voluntarily andwithout compensation. They are not necessarily members of the Institute. The standards developedwithin IEEE represent a consensus of the broad expertise on the s

7、ubject within the Institute as wellas those activities outside of IEEE that have expressed an interest in participating in the develop-ment of the standard.Use of an IEEE Standard is wholly voluntary. The existence of an IEEE Standard does not implythat there are no other ways to produce, test, meas

8、ure, purchase, market, or provide other goods andservices related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at thetime a standard is approved and issued is subject to change brought about through developments inthe state of the art and comments received from users of th

9、e standard. Every IEEE Standard is sub-jected to review at least every ve years for revision or reafrmation. When a document is morethan ve years old and has not been reafrmed, it is reasonable to conclude that its contents,although still of some value, do not wholly reect the present state of the a

10、rt. Users are cautioned tocheck to determine that they have the latest edition of any IEEE Standard.Comments for revision of IEEE Standards are welcome from any interested party, regardless ofmembership afliation with IEEE. Suggestions for changes in documents should be in the form of aproposed chan

11、ge of text, together with appropriate supporting comments.Interpretations: Occasionally questions may arise regarding the meaning of portions of standards asthey relate to specic applications. When the need for interpretations is brought to the attention ofIEEE, the Institute will initiate action to

12、 prepare appropriate responses. Since IEEE Standards rep-resent a consensus of all concerned interests, it is important to ensure that any interpretation hasalso received the concurrence of a balance of interests. For this reason, IEEE and the members of itssocieties and Standards Coordinating Commi

13、ttees are not able to provide an instant response tointerpretation requests except in those cases where the matter has previously received formalconsideration. Comments on standards and requests for interpretations should be addressed to:Secretary, IEEE Standards Board445 Hoes LaneP.O. Box 1331Pisca

14、taway, NJ 08855-1331USAAuthorization to photocopy portions of any individual standard for internal or personal use isgranted by the Institute of Electrical and Electronics Engineers, Inc., provided that the appropriatefee is paid to Copyright Clearance Center. To arrange for payment of licensing fee

15、, please contactCopyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA;(508) 750-8400. Permission to photocopy portions of any individual standard for educational class-room use can also be obtained through the Copyright Clearance Center.Note: Attention is called to

16、the possibility that implementation of this standard mayrequire use of subject matter covered by patent rights. By publication of this standard,no position is taken with respect to the existence or validity of any patent rights inconnection therewith. The IEEE shall not be responsible for identifyin

17、g patents forwhich a license may be required by an IEEE standard or for conducting inquiries intothe legal validity or scope of those patents that are brought to its attention.Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleN

18、o reproduction or networking permitted without license from IHS-,-,-iiiIntroduction(This introduction is not a part of ANSI C136.17-1997, American National Standard for Roadway Lighting Equip-mentEnclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity-Discharge LampsMechanicalIntercha

19、ngeability of Refractors.)This standard was prepared by the Roadway Luminaire Task Force of Subcommittee C136-1, Subcommitteeon Luminaires and Light-Sensitive Control Devices.Greg Steinman,ChairThe Accredited Standards Committee on Roadway Lighting, C136, had the following voting members at thetime

20、this standard was approved:Richard E. Hildreth,ChairRosemary Tennis,Staff LiaisonOrganization Represented Name of RepresentativeAlabama Power Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Scott Thurman Area Lightin

21、g Research, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . George DuveCEW Lighting, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22、. . . .Dan PitcherDark to Light, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jeff D. WaltersDetroit Edison Company. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23、. . . . . . . . . . . . . . . . . .Donald EdwardsDuke Power Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stokes WhiteEdison Electric Institute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Matthew MingoiaEntergy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Al MaguireFederal Highway Administration . . . . . . . .

25、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Charles CraigFisher-Pierce Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mark MartichGeneral Electric Compa

26、ny . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . W. W. AlexanderGeorgia Power Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mike Stevens

27、Hapco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thomas M. FawleyHolophane Lighting Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28、 . . . .Randall P. CrothersHubbell, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thomas D. HirtIlluminating Engineering Society . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29、. . . . . . . . . . . . . . . . . . . . . .Richard E. StarkLampas Controls, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vance SpillmanLos Angeles Bureau of Street Lighting. . . . . . . . . . . . . . . . . . . . .

30、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Philip H. ReedMemphis Light, Gas and Water Division . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Robert E. BeanblossomNational Electrical Manufacturers Association . . . . . . . . . . . . . .

31、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Richard SnowPennsylvania Power and Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Robert L. NickelCopyright The Institute of Electrical and Electronics Engineers

32、, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ivPSI Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Richard E. Hildret

33、hRipley Photocontrol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . John MillsShakespeare, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

34、 . . . . . . . . . . William D. GrifnSherman Utility Structures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ricky MiskelleyThomas & Betts Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

35、. . . . . . . . . . . . . . . . . . . Rick Kauffman (Alt.)Union Metal Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Joseph BrindlingerValmont Industries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dennis HavranekVirginia Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Frank I. HinkleW. J. Whatley, Inc. . . . . . . . . . . . .

37、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . George MaybeeWisconsin Department of Transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Balu AnanthanarayananWisconsin Electric Power . .

38、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Richard G. MonsoorIndividual Members . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frank M. AlversonAndr

39、ew S. Kosiorek Valerie E. ZelentyIEEE Standards Project EditorCopyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-vContents1. Overview 12. Physical dimensions.

40、23. Materials 2Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under l

41、icense with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHSAmerican Natio

42、nal Standard for Roadway Lighting EquipmentEnclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity-Discharge LampsMechanical Interchangeability of Refractors1. Overview1.1 ScopeThis standard covers the dimensional features and the material of refractors of the approximate shape showni

43、n Figures 1 through 3, and as described in ANSI C136.14-1988, American National Standard for RoadwayLighting EquipmentEnclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity-Dis-charge Lamps.1.2 PurposeThis standard providesa) A description and diagrams of substitute refractors for th

44、e original refractor when replacement isnecessary.b) The dimensions for a good t for the refractor at the points of contact, the points of attachment, orboth, to the reector or the housing, or to both the reector and the housing.c) Requirements for light distribution acceptable to the user, but not

45、necessarily equal to the originaloptical system.NOTEThe optics package consisting of the lamp, the reector, and the refractor conguration is unique to the individ-ual xture. Replacement of a single xture component will not guarantee the same optical performance.The requirements and gures in this sta

46、ndard will help keep the number of refractors needed on service vehi-cles to a minimum.1-,-,-ANSIC136.17-1997 AMERICAN NATIONAL STANDARD FOR ROADWAY LIGHTING EQUIPMENTCopyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reprodu

47、ction or networking permitted without license from IHS-,-,-2. Physical dimensionsFigures 1 through 3 show the refractors points of contact, points of attachment, or both, to the reector, thehousing, or both.The dimensions given in these gures are for interchangeability, and other variants satisfying

48、 nondimen-tioned provisions may be capable of otherwise equivalent performance.3. MaterialsRefractors may be made of heat-resistant glass, polycarbonate, acrylics, or other suitable materials as speci-ed by the user.2ANSIENCLOSED SIDE-MOUNTED LUMINAIRES FOR HORIZONTAL-BURNING HID LAMPS C136.17-1997C

49、opyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Figure 1Flange dimensions for refractors for small horizontal-burning HID luminaires3ANSIC136.17-1997 AMERICAN NATIONAL STANDARD FOR ROADWAY LIGHTING EQUIPMENTCopyright The Institute of Electrical and Electronics