ANSI CAN CSA-C22.2 NO.198.3-5-2005 Coated electrical sleeving (Second Edition Update No 1 March 2007).pdf

1、C22.2 No. 198.3-05(reaffirmed 2014)Coated electrical sleevingLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers r

2、epresenting varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion

3、of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringemen

4、t of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regu

5、lation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONS

6、EQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF

7、CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person o

8、r entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contai

9、ned in this document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and owne

10、rshipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions a

11、nd trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups an

12、d/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttentio

13、n is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent righ

14、ts is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFOR

15、THESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representa

16、tion of general interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contribution to the national interest.Those who have a need t

17、o apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO which publishes the standard.The responsibility for approving standards as National Standards of Canada rests with theStandards Council of

18、Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its

19、suitability for their particular purpose.Registered trade-mark of Canadian Standards Association(National Standards of Canada text inserted March 2007)(approved March 2007)Canadian Standards AssociationCAN/CSA-C22.2 No. 198.3-05Second EditionUnderwriters Laboratories Inc.UL 1441Fourth EditionANSI/UL

20、 1441-2005Coated electrical sleevingSeptember 16, 2005(Title page reprinted: March 2007)Commitment for AmendmentsThis standard isissued jointly by Canadian Standards Association (CSA), and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be sub

21、mitted to CSA or UL at any time. Revisions to this standard will be made only after processing according to the standards development procedures of CSA and UL. CSA and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ISBN

22、1-55436-845-6 2005Canadian Standards AssociationAll rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.ISBN 0-7629-1107-7Copyright 1995, 2005 Underwriters Laboratories Inc.Revisions of this Standard will be made by issu

23、ing revised or additional pages bearing their date of issue. A UL Standard is current only if it incorporates the most recently adopted revisions, all of which are itemized on the transmittal notice that accompanies the latest set of revised requirements.The most recent designation of ANSI/UL 1441 a

24、s an American National Standard (ANSI) occurred on July 21, 2005.This ANSI/UL Standard for Safety, which consists of the Fourth edition, is under continuous maintenance, whereby each revision is ANSI approved upon publication. Comments or proposals for revisions on any part of the Standard may be su

25、bmitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/.(Copyright page replaced March 2007)Standards Update ServiceC22.2 No. 198.3-05September 2005Title: Coated electrical sleevingPagination: 38 pages

26、, each dated September 2005To register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2017115.If you require assistance, please e-mail techsupportcsagroup.org or ca

27、ll 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.Canadian Standards Association CSA C22.2 No. 198.3-05 Second Edition Underwriters Laboratories Inc. UL 1441 Fourth Edition Coated electrical sleeving September 16, 2005 ANSI/

28、UL 1441-2005 Commitment for Amendments This standard is issued jointly by Canadian Standards Association (CSA) and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to CSA or UL at any time. Revisions to this standard will be made o

29、nly after processing according to the standards development procedures of CSA and UL. CSA and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ISBN 1-55436-845-6 2005 Canadian Standards Association All rights reserved. No

30、part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. ISBN 0-7629-1107-7 Copyright 1995, 2005 Underwriters Laboratories Inc. Revisions to this Standard will be made by issuing revised or additional pages bearing their date of issue. A UL Sta

31、ndard is current only if it incorporates the most recently adopted revisions, all of which are itemized on the transmittal notice that accompanies the latest set of revised requirements. The most recent designation of ANSI/UL 1441 as an American National Standard (ANSI) occurred on July 21, 2005. Th

32、is ANSI/UL Standard for Safety, which consists of the Fourth edition, is under continuous maintenance, whereby each revision is ANSI approved upon publication. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Prop

33、osal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. September 16, 2005 CSA C22.2 No. 198.3-05 UL 1441 3 Contents Preface . 4 Foreword (CSA). 6 1 Scope 7 2 Reference publications and definitions 7 2.1 Reference publications. 7 2.2 Definitions 8 3 General Requireme

34、nts 8 4 Construction 9 4.1 General 9 4.2 Physical dimensions. 9 5 Tests. 10 5.1 Specimens . 10 5.2 Dielectric breakdown 10 5.3 Oil resistance . 11 5.4 Cold bend. 11 5.5 Volume resistivity 12 5.6 Horizontal-specimen flame . 13 5.7 VW-1 (vertical-wire) flame (Optional) . 14 5.8 Hydrolytic stability (S

35、tability under humidity) . 16 6 Marking 17 6.1 Product marking. 17 6.2 Package marking . 17 6.3 Factory identification 17 Tables 18 Figures 33 4 CSA C22.2 No. 198.3-05 UL 1441 September 16, 2005 Preface This is the common CSA and UL standard for Coated electrical sleeving. It is the second edition o

36、f CSA C22.2 No. 198.3 and the fourth edition of UL 1441. This edition of CSA C22.2 No. 198.3 supersedes the previous edition published in 1995. This edition of UL 1441 supersedes the previous edition published in 1995. This common standard was prepared by the Canadian Standards Association (CSA) and

37、 Underwriters Laboratories Inc. (UL). The efforts and support of the Technical Harmonization Committee 15C (Electrical Tubing and Sleeving Products) of the Council on the Harmonization of Electrotechnical Standards of the Nations of the Americas (CANENA) are gratefully acknowledged. This standard wa

38、s reviewed by the CSA Subcommittee on Insulation Systems, under the jurisdiction of the CSA Technical Committee on Wiring Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard will be subm

39、itted to the Standards Council of Canada (SCC) for approval as a National Standard of Canada. This standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. Where reference is made to a specific number of samples to be tested, the specified numb

40、er is to be considered a minimum quantity. Note: Although the intended primary application of this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. Level of harmonization Th

41、is standard uses the IEC format but is not based on, nor is it to be considered equivalent to, an IEC standard. This standard is published as an equivalent standard for CSA and UL. An equivalent standard is a standard that is substantially the same in technical content, except as follows: Technical

42、national differences are allowed for codes and governmental regulations as well as those recognized as being in accordance with NAFTA Article 905, for example, because of fundamental climatic, geographical, technological, or infrastructural factors, scientific justification, or the level of protecti

43、on that the country considers appropriate. Presentation is word for word except for editorial changes. Reasons for differences from IEC The Technical Harmonization Subcommittee identified the following standard as being within the scope of this standard: IEC 60684, Flexible Insulating Sleeving. IEC

44、60684 and CSA C22.2 No. 198.3/UL 1441 are similar but not identical. Both standards cover multiple, but not identical, products and similar methods. The THC agreed to address the issues involved in the harmonization of these standards during the next revision of CSA C22.2 No. 198.3/UL 1441. Interpre

45、tations The interpretation by the standards development organization of an identical or equivalent standard is based on the literal text to determine compliance with the standard in accordance with the procedural rules of the standards development organization. If more than one interpretation of the

46、 literal text has been identified, a revision is to be proposed as soon as possible to each of the standards development organizations to more accurately reflect the intent. CSA effective date The effective date for CSA International will be announced through CSA Informs or a CSA certification notic

47、e. September 16, 2005 CSA C22.2 No. 198.3-05 UL 1441 5 UL effective date As of September 16, 2005 all products Listed or Recognized by UL must comply with the requirements in this standard except for Clause 6 which is effective September 16, 2006. New product submittals to UL may be evaluated under

48、all requirements in this standard or, if requested in writing, evaluated under presently effective requirements only. The presently effective requirements are contained in the Third edition of UL 1441. A UL effective date is one established by Underwriters Laboratories Inc. and is not part of the AN

49、SI approved standard. 6 CSA C22.2 No. 198.3-05 UL 1441 September 16, 2005 Foreword (CSA) The Canadian Standards Association (CSA) develops standards under the name Canadian Standards Association, and provides certification and testing under the name CSA International. CSA International provides certification services for manufacturers who, under license from CSA, wis