ANSI CAN CSA-C22.2 NO.60745-2-13-11-2011 Hand-held motor operated electric tools - Safety - Part 2-13 Particular requirements for chain saws (First Edition Update No 1 December 201.pdf

1、Hand-held motor operated electric tools Safety Part2-13:Particular requirements for chain sawsCAN/CSA-C22.2 No. 60745-2-13-11(IEC 60745-2-13:2006+A1:2009, MOD)National Standard of CanadaNOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE.Legal Notice for StandardsCanadian Standards Association (CSA) s

2、tandards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes

3、 rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without li

4、mitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information publishe

5、d in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DI

6、RECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NE

7、GLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to

8、 render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA

9、accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance

10、with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by

11、 copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modi

12、fication, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reser

13、ves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are express

14、ly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this d

15、ocument is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA

16、 to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy o

17、f this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes you

18、r acceptance of the terms and conditions of this Legal Notice.Update No. 3CAN/CSA-C22.2 No. 60745-2-13-11February 2017Note: For information about the Standards UpdateService or if you are missing any updates, go to shop.csa.ca or e-mail techsupportcsagroup.org.Title: Hand-held motor operated electri

19、c tools Safety Part 2-13: Particular requirements for chain saws originally published December 2011Revisions issued: Update No. 1 December 2014Update No. 2 May 2015The following revisions have been formally approved and are marked by a vertical line in the margin on the attached replacement pages:No

20、te: Pages 6A and 6B have been deleted. Users should remove these pages from the Standard. Update your copy by inserting these revised pages.Keep the pages you remove for reference.Revised Title page, copyright page, Preface, and Clause 8.1DVNew NoneDeleted Clauses 1DV and 2DVBlank pageCSAGroupCAN/CS

21、A-C22.2No.60745-2-13-11FirstEdition(IEC60745-2-13:2006+A1:2009,MOD)UnderwritersLaboratoriesInc.UL60745-2-13FirstEditionHand-Held Motor-Operated Electric Tools Safety Part 2-13:ParticularRequirementsforChainSawsDecember 8, 2011(Title Page Reprinted: February 17, 2017)This national standard is based o

22、n publication IEC 60745-2-13, Edition 2.1 (2011).ANSI/UL60745-2-13-2017Approved byCommitmentforAmendmentsThis standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”) andUnderwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the sta

23、ndardmay be submitted to CSA Group or UL at anytime. Revisions to this standard will be made only afterprocessing according to the standards development procedures of CSA Group and UL. CSA Group andUL will issue revisions to this standard by means of a new edition or revised or additional pages bear

24、ingtheir date of issue.ISBN978-1-55491-681-82011CSAGroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever without theprior permission of the publisher.CSA Standards are subject to periodic review, and suggestions for their improvement will be referredto the ap

25、propriate committee. To submit a proposal for change to CSA Standards, please send thefollowing information to inquirescsa.ca and include Proposal for change in the subject line:Standard designation (number); relevant clause, table, and/or figure number; wording of the proposedchange; and rationale

26、for the change.To purchase CSA Standards and related publications, visit CSAs Online Store at www.ShopCSA.ca orcall toll-free 1-800-463-6727 or 416-747-4044.Copyright2017UnderwritersLaboratoriesInc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standardsho

27、uld be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the sole and exclusive property of UL.This ANSI/UL Standard for Safety consists of the First Edition. The most recent designation of ANSI/UL60745-2-13 as an American Natio

28、nal Standard (ANSI) occurred on February 17, 2017. ANSI approvalfor a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or thePreface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval ofIEC-based standards.Comments or prop

29、osals for revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative StandardsDevelopment System (CSDS) at https:/.To purchase UL Standards, visit Comm 2000 at http:/m- or calltoll-free 1-888-853-3503.Pre

30、faceThis is the harmonized CSA Group and UL standard for Hand-Held Motor-Operated Electric Tools Safety Part 2-13: Particular Requirements for Chain Saws. It is the first edition of CAN/CSA C22.2 No.60745-2-13, and the first edition of UL 60745-2-13. This harmonized standard has been jointly revised

31、 onFebruary 17, 2017. For this purpose, CSA Group and UL are issuing revision pages dated February 17,2017.This harmonized standard is based on IEC Publication IEC 60745-2-13, edition 2.1 (edition 2:2006consolidated with amendment 1:2009).This harmonized standard was prepared by the CSA Group and Un

32、derwriters Laboratories Inc. (UL). Theefforts and support of the Harmonization Working Group for the Adoption of the IEC Series of Hand-Held,Motor-Operated Tool Standards, are gratefully acknowledged.This standard is considered suitable for use for conformity assessment within the stated scope of th

33、estandard.This standard was reviewed by the CSA Subcommittee on Safety of Hand-Held Motor-Operated ElectricTools, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products andthe CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been form

34、allyapproved by the CSA Technical Committee.This standard has been approved as a National Standard of Canada by the Standards Council of Canada(SCC).This standard has been approved by the American National Standards Institute (ANSI) as an AmericanNational Standard.ApplicationofStandardWhere referenc

35、e is made to a specific number of samples to be tested, the specified number isconsidered a minimum quantity.Note:Althoughtheintendedprimaryapplicationofthisstandardisstatedinitsscope,itisimportanttonotethatitremainstheresponsibilityoftheusersofthestandardtojudgeitssuitabilityfortheirparticularpurpo

36、se.This CAN/CSA-C22.2 No. 60745-2-13, Standard for Safety for Hand-Held Motor-Operated Electric Tools Safety Part 2-13: Particular Requirements For Chain Saws, is to be used in conjunction with the thirdedition of CAN/CSA-C22.2 No. 60745-1. The requirements for chain saws are contained in this Part

37、2Standard and CAN/CSA-C22.2 No. 60745-1. Requirements of this Part 2 Standard, where stated, amendthe requirements of CAN/CSA-C22.2 No. 60745-1. Where a particular subclause of CAN/CSA-C22.2 No.60745-1 is not mentioned in CAN/CSA-C22.2 No. 60745-2-13, the CAN/CSA-C22.2 No. 60745-1subclause applies.T

38、his UL Standard 60745-2-13 Standard for Safety for Hand-Held Motor-Operated Electric Tools Safety Part 2-13: Particular Requirements For Chain Saws, is to be used in conjunction with the fourth editionof UL 60745-1. The requirements for chain saws are contained in this Part 2 Standard and UL 60745-1

39、.FEBRUARY17,2017 CAN/CSA-C22.2NO.60745-2-13-11 UL60745-2-13 5Requirements of this Part 2 Standard, where stated, amend the requirements of UL 60745-1. Where aparticular subclause of UL 60745-1 is not mentioned in UL 60745-2-13, the UL 60745-1 subclauseapplies.LevelofHarmonizationThis standard adopts

40、 the IEC text with national differences.This standard is published as an equivalent standard for CSA and UL.An equivalent standard is a standard that is substantially the same in technical content, except as follows:Technical national differences are allowed for codes and governmental regulations as

41、 well as thoserecognized as being in accordance with NAFTA Article 905, for example because of fundamental climatic,geographical, technological, or infrastructural factors, scientific justification, or the level of protection thatthe country considers appropriate. Presentation is word for word excep

42、t for editorial changes.All national differences from the IEC text are included in the CSA and UL versions of the standard. Whilethe technical content is the same in each organizations version, the format and presentation may differ.ReasonsforDifferencesfromIECDifferences from the IEC are being adde

43、d in order to address regulatory and safety situations present inthe US and Canada.InterpretationsThe interpretation by the standards development organization of an identical or equivalent standard isbased on the literal text to determine compliance with the standard in accordance with the procedura

44、lrules of the standards development organization. If more than one literal interpretation has been identified,a revision is to be proposed as soon as possible to each of the standards development organizations tomore accurately reflect the intent.IECCopyrightFor CSA Group, the text, figures, and tab

45、les of International Electrotechnical Commission Publication IEC60745-2-13, HandHeld Motor-Operated Electric Tools Safety Part 2-13: Particular Requirements forChain Saws, copyright 2011, are used in this standard with the consent of the InternationalElectrotechnical Commission. The IEC Foreword is

46、not a part of the requirements of this standard but isincluded for information purposes only.These materials are subject to copyright claims of IEC and UL. No part of this publication may bereproduced in any form, including an electronic retrieval system, without the prior written permission of UL.A

47、ll requests pertaining to the IEC publication 60745-2-13, HandHeld Motor-Operated Electric Tools Safety Part 2-13: Particular Requirements for Chain Saws Standard should be submitted to UL.FEBRUARY17,2017CAN/CSA-C22.2NO.60745-2-13-11 UL60745-2-136DV.101 DE Addition to the part 2:The numbering system

48、 in the standard uses a space instead of a comma to indicatethousandsandusesacommainsteadofaperiodtoindicateadecimalpoint.Forexample,1000means1,000and1,01means1.01.DECEMBER8,2011 CAN/CSA-C22.2NO.60745-2-13-11 UL60745-2-13 11HAND-HELDMOTOR-OPERATEDELECTRICTOOLSSAFETYPART2-13:PARTICULARREQUIREMENTSFOR

49、CHAINSAWS1 ScopeThis clause of Part 1 is applicable, except as follows:Addition:This standard applies to chain saws for cutting wood and designed for use by one person. This standarddoes not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in anyother way such as with a support or as a stationary or transportable machine.This standard does not apply to chain saws for tree service as defined in ISO 11681-2, pole cutters andpruners.1DV D1 Deleted Febr