ANSI CAN CSA-C22.2 NO.60745-2-19A-05-2011 Hand-held motor-operated electric tools - Safety - Part 2-19 Particular requirements for jointers (First Edition).pdf

1、Hand-held motor-operated electric tools Safety Part 2-19: Particular requirements for jointersAmendment 1:2011 (IDT) toNational Standard of CanadaCAN/CSA-C22.2 No. 60745-2-19-05(IEC 60745-2-19:2005, IDT)NOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE.CSA Standards Update ServiceAmendment 1:2011 to

2、CAN/CSA-C22.2 No. 60745-2-19-05February 2011Title: Hand-held motor-operated electric tools Safety Part 2-19: Particular requirements for jointersPagination: 5 pages (ii preliminary and text)To register for e-mail notification about any updates to this publicationgo to www.ShopCSA.caclick on E-mail S

3、ervices under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2417690.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we

4、 protect your personal information.Canadian Standards AssociationAmendment 1:2011 (IDT) to National Standard of CanadaCAN/CSA-C22.2 No. 60745-2-19-05, First Edition(IEC 60745-2-19:2005, IDT)Underwriters Laboratories Inc.UL 60745-2-19First EditionAmendment 1Hand-held motor-operated electric tools Saf

5、ety Part 2-19:Particular requirements for jointersAmendment publication date: FEBRUARY 25, 2011This amendment is an adoption of IEC Amendment 1 (2010) to publication IEC 60745-2-19, First Edition (2005).ANSI/UL 60745-2-19-2011 2011Canadian Standards AssociationAll rights reserved. No part of this pu

6、blication may be reproduced in any form whatsoeverwithout the prior permission of the publisher.Amendment 1:2010 to International Standard IEC 60745-2-19:2005 has been adoptedwithout modification (IDT) as Amendment 1:2011 to CAN/CSA-C22.2 No. 60745-2-19-05.This Amendment was reviewed by the CSA Subc

7、ommittee on Safety of Hand-Held Motor-Operated Electric Tools, under the jurisdiction of the CSA Technical Committee on Consumerand Commercial Products and the CSA Strategic Steering Committee on Requirements forElectrical Safety, and has been formally approved by the CSA Technical Committee.Februar

8、y 2011Copyright 2011 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of aStandard should be altered in any way. All of ULs Standards and all copyrights, ownerships,and rights regarding those Standards shall remain the sole and exclu

9、sive property of UL.This ANSI/UL Standard for Safety consists of the First edition including revisions throughFebruary 25, 2011. The most recent designation of ANSI/UL 60745-2-19 as an AmericanNational Standard (ANSI) occurred on February 25, 2011. ANSI approval for a standard doesnot include the Co

10、ver Page, Transmittal Pages, Title Page (front and back), or the Preface.The National Difference Page and IEC Foreword are also excluded from the ANSI approval ofIEC-based standards.Comments or proposals for revisions on any part of the Standard may be submitted to UL atany time. Proposals should be

11、 submitted via a Proposal Request in ULs On-LineCollaborative Standards Development System (CSDS) at http:/.To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.IEC 60745-2-19Edition 1.0 2010-05INTERNATIONAL STANDARD NORME INTERNATIONALEHand-held motor-operated elec

12、tric tools Safety Part 2-19: Particular requirements for jointers Outils lectroportatifs moteur Scurit Partie 2-19: Rgles particulires pour les mortaiseuses IEC60745-2-19:2005/A1:2010 AMENDMENT 1 AMENDEMENT 1 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights

13、reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester

14、. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de c

15、ette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la

16、 CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The

17、International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. P

18、lease make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives informa

19、tion on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The world

20、s leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/cust

21、serv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire or

22、ganisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la

23、plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des inf

24、ormations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electrop

25、edia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique Internati

26、onal en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 607

27、45-2-19Edition 1.0 2010-05INTERNATIONAL STANDARD NORME INTERNATIONALEHand-held motor-operated electric tools Safety Part 2-19: Particular requirements for jointers Outils lectroportatifs moteur Scurit Partie 2-19: Rgles particulires pour les mortaiseuses INTERNATIONAL ELECTROTECHNICAL COMMISSION COM

28、MISSION ELECTROTECHNIQUE INTERNATIONALE CICS 25.140.20 PRICE CODECODE PRIXAMENDMENT 1 AMENDEMENT 1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60745-2-19 Amend. 1 IEC:2010 FOREWORD This amendment has been prepa

29、red by IEC committee 116: Safety of hand-held motor-operated electric tools. The text of this amendment is based on the following documents: FDIS Report on voting 116/36/FDIS 116/44/RVD Full information on the voting for the approval of this amendment can be found in the report on voting indicated i

30、n the above table. This amendment modifies Part 2-19 of IEC 60745 to ensure its conformity with the fourth edition (2006) of IEC 60745-1, Hand-held motor-operated electric tools Safety Part 1: General requirements. The committee has decided that the contents of the base publication and its amendment

31、s will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch” in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. _ 1 Scope Replace the existing text b

32、y the following: This clause of Part 1 is applicable, except as follows: Addition: This standard applies to jointers for cutting into wood or similar material. 3 Definitions Replace the title of this clause by the following: 3 Terms and definitions 8 Marking and instructions Replace subclause 8.12.1

33、 by the following: Amendment 1:2011 to CAN/CSA-C22.2 No. 60745-2-19-0560745-2-19 Amend. 1 IEC:2010 3 8.12.1.1 Addition: Jointers safety warnings Disc cutters must be rated for at least the speed marked on the tool. Disc cutters running over rated speed can fly apart and cause injury. NOTE The term “

34、disc cutter” may be replaced by other terms to reflect regional differences. Always use the guard. The guard protects the operator from broken disc cutter fragments and unintentional contact with the disc cutter. NOTE The term “disc cutter” may be replaced by other terms to reflect regional differen

35、ces. Hold power tool by insulated gripping surfaces, because the cutter may contact its own cord. Cutting a “live“ wire may make exposed metal parts of the power tool “live“ and could give the operator an electric shock. Annex K Battery tools and battery packs Replace the existing text of Annex K by

36、 the following: K.1 Addition: All clauses of this part 2 apply unless otherwise specified in this annex. K.8.12.1.1 This subclause of part 2 is applicable, except as follows: The third dash of this part 2 is not applicable. K.12.4 This subclause of part 2 is not applicable. _ Amendment 1:2011 to CAN

37、/CSA-C22.2 No. 60745-2-19-05ICS 25.140.20 Copyright NoticeThis Amendment to the International Standard contains information copyright protected by the International Electrotechnical Commission (IEC). Except as permitted under the laws of Canada, no extract of this Amendment to the International Stan

38、dard may be reproduced, stored in any retrieval system, or transmitted in any form or by any means, electronic, photocopying, recording, or otherwise, without prior permission from the Standards Council of Canada (SCC). Requests for permission to reproduce this Amendment to the International Standar

39、d or parts thereof should be addressed to Manager, Technical Document Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7 The Canadian adoption of this Amendment to the International Standard contains information copyright protected by the Canadian Standards Assoc

40、iation. All rights reserved. No part of this adopted Amendment may be reproduced in any form whatsoever without the prior permission of the publisher. IEC material is reprinted with permission. Requests for permission to reproduce this adopted Amendment or parts thereof should be addressed to Manage

41、r, Sales Canadian Standards Association 5060 Spectrum Way, Suite 100 Mississauga, Ontario L4W 5N6Copyright violators will be prosecuted to the full extent of the law. PRINTED IN CANADAIMPRIMEAU CANADA100%The Canadian Standards Association (CSA) prints its publications on Rolland Enviro100, which contains 100% recycled post-consumer fibre, is EcoLogo and Processed Chlorine Free certified, and was manufactured using biogas energy.