ANSI CAN CSA-C22.2 NO.61010-1-12-2012 Safety requirements for electrical equipment for measurement control and laboratory use - Part 1 General requirements (Third Edition Update No.pdf

1、Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirementsCAN/CSA-C22.2 No. 61010-1-12(IEC 61010-1:2010, MOD)National Standard of CanadaNOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE.Legal Notice for StandardsCanadian Standards Associati

2、on (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and e

3、stablishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including,

4、without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the informatio

5、n published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE

6、FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (IN

7、CLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not unde

8、rtaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents

9、, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce c

10、ompliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are pr

11、otected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized

12、 use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law,

13、 CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard a

14、re expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following

15、:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authori

16、zed by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electro

17、nic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document const

18、itutes your acceptance of the terms and conditions of this Legal Notice.Update No. 2CAN/CSA-C22.2 No. 61010-1-12April 2016Note: For information about the Standards Update Service or if you are missing any updates, go to shop.csa.ca or e-mail techsupportcsagroup.org.Title: Safety requirements for ele

19、ctrical equipment for measurement, control, and laboratory use Part 1: General requirements originally published May 2012Revisions issued: Update No. 1 July 2015The following revisions have been formally approved and are marked by a vertical line in the margin on the attached replacement pages:Revis

20、ed Title page, copyright page, Contents, Preface, and Clauses 2DV and 6.10.4DVNew Clauses 6.10.4DV.2, 11.6DV, and EDV and Annex DVEDeleted None Update your copy by inserting these revised pages.Keep the pages you remove for reference.Blank pageCSA GroupCAN/CSA-C22.2 No. 61010-1-12Third Edition(IEC 6

21、1010-1:2010, MOD)ISAANSI/ISA-61010-1 (82.02.01)Third EditionUnderwriters Laboratories Inc.UL 61010-1Third EditionSafety Requirements for Electrical Equipment for Measurement,Control, and Laboratory Use Part 1: General RequirementsMay 11, 2012(Title Page Reprinted: April 29, 2016)This standard is bas

22、ed on IEC 61010-1, Third Edition (2010).ANSI/UL 61010-1-2016Approved byCommitment for AmendmentsThis standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”), the International Society ofAutomation (ISA) and Underwriters Laboratories Inc. (UL). Comments or proposal

23、s for revisions on any part of the standard maybe submitted to CSA Group or UL at anytime. Revisions to this standard will be made only after processing according to thestandards development procedures of CSA Group and UL. CSA Group and UL will issue revisions to this standard by means ofa new editi

24、on or revised or additional pages bearing their date of issue. ISA will incorporate the same revisions into their editionof the standard bearing the same date of issue as the CSA and UL pages.CSA, ISA, and UL are separate and independent entities and each is solely responsible for its operations and

25、 business activities.The CSA trade names and trademarks depicted in this document are the sole property of the Canadian Standards Association(CSA). The ISA trade names and trademarks depicted in this document are the sole property of the International Society ofAutomation (ISA). The UL trade names a

26、nd trademarks depicted in this document are the sole property of UnderwritersLaboratories Inc. (UL).ISBN 978-1-55491-705-1 2012 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever without theprior permission of the publisher.This Standard is subject to

27、review five years from the date of publication, and suggestions for itsimprovement will be referred to the appropriate committee. To submit a proposal for change, pleasesend the following information to inquirescsagroup.org and include Proposal for change in thesubject line: Standard designation (nu

28、mber); relevant clause, table, and/or figure number; wording ofthe proposed change; and rationale for the change.To purchase CSA Group Standards and related publications, visit CSA Groups Online Store atshop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044.ISBN 978-1-941546-87-1 Copyright 201

29、6 ISAAll rights reserved. Not for resale. No part of this publication may be reproduced in any form, includingan electronic retrieval system, without the prior written permission of ISA.Copyright 2016 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor

30、 electronic copy of a Standardshould be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the sole and exclusive property of UL.This ANSI/UL Standard for Safety consists of the Third Edition including revisions through April 29,

31、2016. The most recent designation of ANSI/UL 61010-1 as an American National Standard (ANSI)occurred on April 29, 2016. ANSI approval for a standard does not include the Cover Page, TransmittalPages, Title Page (front and back), or the Preface. The National Difference Page and IEC Forewordare also e

32、xcluded from the ANSI approval of IEC-based standards.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative StandardsDevelopment System (CSDS) at http:/.CONTENTSPreface 10NA

33、TIONAL DIFFERENCES 12FOREWORD .131 Scope and object 171.1 Scope 171.2 Object .191.3 Verification .201.4 Environmental conditions .202 Normative references .213 Terms and definitions 243.1 Equipment and states of equipment .243.2 Parts and accessories .253.3 Quantities 253.4 Tests 263.5 Safety terms

34、263.6 Insulation .274 Tests .284.1 General 284.2 Sequence of tests .294.3 Reference test conditions 294.4 Testing in SINGLE FAULT CONDITION 325 Marking and documentation .375.1 Marking 375.2 Warning markings .435.3 Durability of markings 435.4 Documentation 446 Protection against electric shock .476

35、.1 General 476.2 Determination of ACCESSIBLE parts 486.3 Limit values for ACCESSIBLE parts .506.4 Primary means of protection 566.5 Additional means of protection in case of SINGLE FAULT CONDITIONS .576.6 Connections to external circuits .656.7 Insulation requirements 676.8 Procedure for voltage tes

36、ts .816.9 Constructional requirements for protection against electric shock 846.10 Connection to the MAINS supply source and connections between parts of equipment .856.10.4DV.1 PERMANENTLY CONNECTED EQUIPMENT .88A6.10.4DV.2 PERMANENTLY CONNECTED EQUIPMENT .88A6.11 Disconnection from supply source .

37、88A6.11.5DV.1 Polarity of Connections to the MAINS Circuit 917 Protection against mechanical HAZARDS 917.1 General 917.2 Sharp edges 927.3 Moving parts 927.4 Stability 967.5 Provisions for lifting and carrying 97APRIL 29, 2016 CAN/CSA-C22.2 NO. 61010-1-12 ANSI/ISA-61010-1 (82.02.01) UL 61010-1 4A7.6

38、 Wall mounting .98APRIL 29, 2016CAN/CSA-C22.2 NO. 61010-1-12 ANSI/ISA-61010-1 (82.02.01) UL 61010-14BAPRIL 29, 2016 CAN/CSA-C22.2 NO. 61010-1-12 ANSI/ISA-61010-1 (82.02.01) UL 61010-1 5No Text on This Page7.7 Expelled parts 998 Resistance to mechanical stresses .998.1 General 998.2 ENCLOSURE rigidit

39、y tests 1008.3 Drop test 1029 Protection against the spread of fire .1029.1 General .1029.2 Eliminating or reducing the sources of ignition within the equipment 1059.3 Containment of fire within the equipment, should it occur 1059.4 Limited-energy circuit .1109.5 Requirements for equipment containin

40、g or using flammable liquids .1119.6 Overcurrent protection 11210 Equipment temperature limits and resistance to heat .11310.1 Surface temperature limits for protection against burns 11310.2 Temperature of windings .11410.3 Other temperature measurements .11510.4 Conduct of temperature tests .11510.

41、5 Resistance to heat 11611 Protection against HAZARDS from fluids 11811.1 General 11811.2 Cleaning .11911.3 Spillage 11911.4 Overflow .11911.5 Battery electrolyte .12011.6 Specially protected equipment 12011.7 Fluid pressure and leakage .12012 Protection against radiation, including laser sources, a

42、nd against sonic and ultrasonicpressure 12212.1 General 12212.2 Equipment producing ionizing radiation 12312.3 Ultraviolet (UV) radiation .12412.4 Microwave radiation .12512.5 Sonic and ultrasonic pressure 12512.6 Laser sources 12613 Protection against liberated gases and substances, explosion and i

43、mplosion 12613.1 Poisonous and injurious gases and substances .12613.2 Explosion and implosion .12714 Components and subassemblies 12814.1 General 12814.2 Motors .13114.3 Overtemperature protection devices .13114.4 Fuse holders .13214.5 MAINS voltage selection devices 13214.6 MAINS transformers test

44、ed outside equipment 13214.7 Printed wiring boards 13214.8 Circuits or components used as TRANSIENT OVERVOLTAGE limiting devices .13314.9DV.1 Enclosures intended for outdoor use 13314.10DV.1 Conductive coatings .13414.10DV.2 Conductive shield or tape .13414.11DV.1 Direct plug-in transformer units 13

45、415 Protection by interlocks .13415.1 General 13415.2 Prevention of reactivating 135MAY 11, 2012CAN/CSA-C22.2 NO. 61010-1-12 ANSI/ISA-61010-1 (82.02.01) UL 61010-16Annex DVE (normative) Permanently installed equipmentDVE.1 General 212DVE.2 Safety terms 212ADVE.3 Marking and documentation .212ADVE.4

46、Protection against electric shock .212DDVE.5 Resistance to mechanical stresses .212FDVE.6 Protection against the spread of fire 212FDVE.7 Equipment temperature limits and resistance to heat .212FDVE.8 Components and subassemblies 212GBibliographyAPRIL 29, 2016 CAN/CSA-C22.2 NO. 61010-1-12 ANSI/ISA-6

47、1010-1 (82.02.01) UL 61010-1 9PrefaceThis is the harmonized CSA, ISA, and UL standard for Electrical Equipment for Measurement, Control,and Laboratory Use Part 1: General Requirements. It is the third edition of CAN/CSA-C22.2 No.61010-1, the third edition of ANSI/ISA-61010-1 (82.02.01), and the thir

48、d edition of UL 61010-1. Thisedition of CAN/CSA-C22.2 No. 61010-1 supersedes the previous edition published as CAN/CSA-C22.2No. 61010-1 in 2004. This harmonized standard has been jointly revised on April 29, 2016. For thispurpose, CSA Group and UL are issuing revision pages dated April 29, 2016, and

49、 ISA is issuing thechanges to the edition dated April 29, 2016.This harmonized standard is based on IEC Publication 61010-1: third edition Safety Requirements forElectrical Equipment for Measurement, Control, and Laboratory Use Part 1: General requirementsissued June, 2010, as revised IEC Corrigendum number 1 issued May 2011. IEC publication 61010-1 iscopyrighted by the IEC.This harmonized standard was prepared by the CSA Group, the International Society of Automation (ISA),and Underwriters Laboratories Inc. (UL).This standar