ANSI CAN ULC-S8754-13-2013 STANDARD FOR HOLDERS BASES AND CONNECTORS FOR SOLID-STATE (LED) LIGHT ENGINES AND ARRAYS (First Edition Including Amendment 1 December 18 2014).pdf

1、CAN/ULC-S8754-13(Including Amendment 1)STANDARD FOR HOLDERS, BASES, AND CONNECTORS FORSOLID-STATE (LED) LIGHT ENGINES AND ARRAYSNATIONALSTANDARDOF CANADAUnderwriters Laboratories of Canada (ULC) was established in 1920 byletters patent issued by the Canadian Government. It maintains andoperates labo

2、ratories and certification services for the examination,testing and certification of appliances, equipment, materials,constructions and systems to determine their relation to life, fire andproperty hazards as well providing inspection services.Underwriters Laboratories of Canada is accredited by the

3、 StandardsCouncil of Canada as a Certification Organization, a TestingOrganization, and an Inspection Body under the National StandardsSystem of Canada.ULC Standards develops and publishes standards and other relatedpublications for building construction, security and burglar protection,environmenta

4、l safety, electrical equipment, fire protection equipment, gasand oil equipment, thermal insulation products, materials and systems,energy use in the built environment and electrical utility safety.ULC Standards is a not-for-profit organization and is accredited by theStandards Council of Canada as

5、a Standards Development Organization.National Standards of Canada developed by ULC Standards conform tothe criteria and procedures established by the Standards Council ofCanada. Such standards are prepared using the consensus principle byindividuals who provide a balanced representation of interests

6、 relevant tothe subject area on a national basis.ULC is represented across Canada as well as many countries worldwide.For further information on ULC services, please contact:CORPORATE HEADQUARTERSUnderwriters Laboratories of Canada7 Underwriters RoadToronto, Ontario M1R 3A9Telephone: (416) 757-3611F

7、ax: (416) 757-9540Toll-free telephone: 1-866-937-3852The Standards Council of Canada (SCC) is the coordinating body of theNational Standards System, a coalition of independent, autonomousorganizations working towards the further development and improvementof voluntary standardization in the national

8、 interest.The principal objects of the SCC are to foster and promote voluntarystandardization as a means of advancing the national economy,benefiting the health, safety and welfare of the public, assisting andprotecting the consumer, facilitating domestic and international trade, andfurthering inter

9、national cooperation in the field of standards.A National Standard of Canada (NSC) is a standard prepared orreviewed by an accredited Standards Development Organization (SDO)and approved by the SCC according to the requirements of CAN-P-2.Approval does not refer to the technical content of the stand

10、ard; thisremains the continuing responsibility of the SDO. A NSC reflects aconsensus of a number of capable individuals whose collective interestsprovide, to the greatest practicable extent, a balance of representation ofgeneral interests, producers, regulators, users (including consumers),and other

11、s with relevant interests, as may be appropriate to the subjectin hand. It normally is a standard which is capable of making a significantand timely contribution to the national interest.Those who have a need to apply standards are encouraged to useNSCs. These standards are subject to periodic revie

12、w. Users of NSCsare cautioned to obtain the latest edition from the SDO which publishesthe standard.The responsibility for approving National Standards of Canada rests withthe:Standards Council of Canada270 Albert StreetSuite 200Ottawa, OntarioK1P 6N7Telephone: (613) 238-3222REGIONAL OFFICESEASTERN

13、OFFICE6505, Rte Transcanadienne, Suite 330St-Laurent, Qubec H4T 1S3Telephone: (514) 363-5941Fax: (514) 363-7014Toll-free telephone: 1-866-937-3852PACIFIC OFFICE13775 Commerce Parkway, Suite 130Richmond, British Columbia V6V 2V4Telephone: (604) 214-9555Fax: (604) 214-9550Toll-free telephone: 1-866-93

14、7-3852For further information on ULC standards, please contact:ULC STANDARDS171 Nepean Street, Suite 400Ottawa, Ontario K2P 0B4Telephone: (613) 755-2729Fax: (613) 231-5977Customer Service: 1-866-937-3852E-mail: customerserviceulc.caWeb site: www.ulc.caThe intended primary application of this standar

15、d is stated in its scope. It is important to note that it remains the responsibility of the user of thestandard to judge its suitability for this particular application.Copies of this National Standard of Canada may be ordered from ULC Standards.LES NORMES NATIONALES DU CANADA SONT DISPONIBLES EN VE

16、RSIONS FRANAISE ET ANGLAISEULC StandardsCAN/ULC-S8754First EditionUnderwriters Laboratories Inc.ANSI/UL 8754First EditionStandard for Holders, Bases, and Connectors for Solid-State (LED)Light Engines and ArraysJuly 31, 2013(Title Page Reprinted: December 18, 2014)ANSI/UL 8754-2014Approved byCommitme

17、nt for AmendmentsThis Standard is issued jointly by Underwriters Laboratories Inc. (UL) and ULC Standards.Amendments to this Standard will be made only after processing according to the Standards writingprocedures by UL and ULC Standards.UL and ULC Standards are separate and independent entities and

18、 each is solely responsible for itsoperations and business activities. The UL trade names and trademarks depicted in this document arethe sole property of Underwriters Laboratories Inc. The ULC Standards trade names and trademarksdepicted in this document are the sole property of ULC Standards.ISSN

19、0317-526X Copyright ULC StandardsAll rights reserved.No part of this publication may be reproduced in any form, in an electronic retrieval system orotherwise, whatsoever without the prior permission of the publisher.In Canada, written comments are to be sent to the ULC Standards, 400 171 Nepean Stre

20、et, Ottawa,Ontario K2P 0B4. Proposals should be submitted on a Standards Revision Request Form availablefrom ULC Standards.Copyright 2014 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standardshould be altered in any way. All

21、 of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the sole and exclusive property of UL.This ANSI/UL Standard for Safety consists of the First Edition including revisions through December18, 2014.The most recent designation of ANSI/UL 8754 as an Ameri

22、can National Standard (ANSI) occurred onDecember 18, 2014. ANSI approval for a standard does not include the Cover Page, TransmittalPages, Title Page (front and back), or the Preface.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time.Proposals should b

23、e submitted via a Proposal Request in ULs On-Line Collaborative StandardsDevelopment System (CSDS) at http:/.To purchase UL Standards, visit Comm 2000 at http:/m- call toll-free 1-888-853-3503.ULC PreambleInternational Classification for Standards (ICS): 29.140.01; 29.140.40; 31.080.10Attention is d

24、rawn to the possibility that some of the elements of this Canadian standard may be thesubject of patents rights. ULC Standards shall not be held responsible for identifying any or all suchpatents rights.This Standard is intended to be used for conformity assessment.The Amendment to the First Edition

25、 of this ULC Standard was based on, and superseded, the FirstEdition.The initiation of the review of this Standard will commence within 5 years of the date of publication, unlessthe Standard is identified as fitting within a stabilized category, whereby the review will commence withinthe appropriate

26、 time frame set out by ULC Standards.ULC STANDARDS COMMITTEE ON FIELD-REPLACEABLE LED LIGHT ENGINESName Affiliation Region CategoryB. Besmanoff Litelab Corporation USA UserF. Carpenter Lithonia Control Systems USA ProducerM. Chou Great Consultant Services CoLtd.China General InterestD. Cook Shelby C

27、ounty Department ofDevelopment ServicesElectrical DivisionUSA RegulatorJ. Dakin Seoul Semiconductor USA ProducerT. Dinic Electrical Safety Authority Ontario RegulatorG. Galluccio Leviton Inc. USA ProducerG. Garbowicz Thomas Research Products USA General InterestP. Jackson City of Bakersfield USA Reg

28、ulatorR. Mattatall Mattatall Signs Ltd. Nova Scotia UserJ. ONeill Wilger Testing USA General InterestL. Quarles Cooper Lighting USA ProducerD. Rittenhouse University of Waterloo Ontario General InterestM. Savage City of Rio Rancho USA RegulatorT. Stimac GE Lighting Solutions USA ProducerB. Sullivan

29、British Columbia SafetyAuthorityBritish Columbia RegulatorB. Swedberg Ideal Industries Inc. Canada ProducerD. Tikkanen Lumastream Canada Canada UserV. Venkataramanan University of Toronto Canada General InterestT. Woods AAG Stucchi North AmericaInc.USA ProducerK. Wootton Canadian Tire Canada General

30、 InterestZ. Yefeng Phillips China ProducerJ. Caamano UL LLC USA Non-VotingM. Hayes NEMA USA Non-VotingM. Ramlochan (ProjectManager)ULC Standards Canada Non-VotingThis list represents the membership at the time the Committee balloted on the final text of this edition.Since that time, changes in the m

31、embership may have occurred.AMENDMENT NOTICEULC STANDARDSSTANDARD FOR HOLDERS, BASES, AND CONNECTORSFOR SOLID-STATE (LED) LIGHT ENGINES AND ARRAYSCAN/ULC-8754-13AMENDMENT 1 DATE OF AMENDMENT: DECEMBER 18, 2014The following amendments are being incorporated into (CAN/ULC-8754-13):1. Revise Relative T

32、hermal Index (RTI) requirements for polymeric materials used in LimitedApplication Devices (LAD).2. Add exception to loading test for solid-state assembly holders.3. Clarify requirements for lead pull tests for factory assembled solid-state assembly holders.4. Clarify product marking allowances for

33、lampholders.NOTICEPLEASE NOTE THAT THIS STANDARD INCLUDES AMENDMENT(S). THE CURRENT EDITION OFTHIS STANDARD IS NOT VALID UNLESS USED TOGETHER WITH THE AMENDMENT(S).IT IS POSSIBLE, HOWEVER, THAT CERTAIN CODES WILL REFER TO THE SUPERSEDED EDITIONOF THIS STANDARD, WITHOUT THE AMENDMENT(S). IN THOSE INS

34、TANCES, THE COMPILATIONOF THIS DOCUMENT ALLOWS FOR REFERENCE TO BE MADE TO THE STANDARD PRIOR TOTHE INCLUSION OF THE AMENDMENT(S).DECEMBER 18, 2014 CAN/ULC-S8754 ANSI/UL 8754 AMENDMENT 1No Text on This Page4.2.4 A polymeric insulating material used to enclose electrical parts, to provide direct or i

35、ndirect supportof live parts or to provide mechanical support shall possess a minimum electrical relative thermal index(RTI) of 90C (194F), as determined by CAN/CSA-C22.2 No. 0.17 / UL 746B.Exception: A minimum RTI is not specified for polymeric materials used in limited application devices (see6.3

36、and Table 3).6.3 A lampholder that has thermoplastic materials rated greater than the relative thermal index (RTI) asspecified in 4.2.4 and complying with the Mold Stress-Relief Distortion Test of CSA C22.2 No. 43 / UL 496may be plainly and permanently marked in the form “HT#”, where # equals the te

37、mperature rating inincrements of 10C (18F).Exception: The “HT” prefix shall not be used for a limited application device employing thermoplasticmaterials that have an RTI of less than 90C (194F).Table 3Test plan summary using CSA C22.2 No. 43 / UL 496Test description Reference Number and description

38、 of samplesTests for push-in terminalsaCSA C22.2 No. 43 / UL 496,Clause 5.1.36 samples, if device has such terminals.Rain testaCSA C22.2 No. 43 / UL 496,Clause 5.2.146 samples, if device is marked for wet locations.Insulation-piercing terminallampholder temperature testaCSA C22.2 No. 43 / UL 496,Cla

39、use 5.2.1518 samples, if device has such terminals (6 additionalsamples if device is switched).Mold Stress-Relief Distortion CSA C22.2 No. 43 / UL 496,Clause 5.2.176 samples, if device employs thermoplastic material.Note: This table is a summary of test samples typically needed. Actual number of sam

40、ples may vary where agreeable to allparties concerned.aNot required for a limited application device (LAD).bPerformed in accordance with the test method for fluorescent lampholders. For limited application devices, the oventemperature shall be maintained at 10C (18F) above the thermoplastic material

41、s RTI rating.4.14.1 A lampholders retention means shall be sufficiently robust to reliably support both a 200 g (0.44lb) device and withstand loads created by any associated hardware (e.g., spring-loaded heatsink).Compliance shall be determined by the Loading Test in 5.6, using a 500 g (1.1 lb) devi

42、ce mass torepresent all loads.Exception No. 1: Lampholders that form part of a defined-fit system shall be evaluated for the massspecified by their system.Exception No. 2: Lampholders are not prohibited from being evaluated for the support of greater masses.Exception No. 3: This requirement does not

43、 apply to solid-state assembly holders limited to supporting atotal load of 110 g (0.25 lb) or less.5.6.1 A lampholder shall support a load equal to its maximum device mass (see 4.14.1) plus four timesthat mass for 1 min. This force shall be applied perpendicular to the lamp base interface.Note: For

44、 example, if the lampholder is being tested for a device mass of 500 g (1.1lb), then the test mass shall be 2500 g (5.51 lb) (including mass of lamp base).DECEMBER 18, 2014 CAN/ULC-S8754 ANSI/UL 8754 AMENDMENT 17.1.8 A lampholder intended for factory installation and not for field wiring shall inclu

45、de the text “Forfactory assembly only” on each carton or stuffer sheet.Table 5Test force for security of leads testWire gauge (AWG) Test force, N (lbf)24 22.3 (5)22 35.6 (8)20 44.5 (10)18 44.5 (10)16 66.7 (15)14 89.0 (20)12 89.0 (20)aA test force of 22 N (5 lbf) may be used for solid-state assembly

46、holders limited to factory installation only and markedin accordance with 7.1.8.Table B.1Markings French translationItem Product markingsaText Text reference1bFOR USE IN DRY OR DAMP LOCATIONS Verbatim 7.3.1AUX FINS DUTILISATION DANS LES EMPLACEMENTSSECS OU HUMIDES2bFOR USE IN DRY, DAMP OR WET LOCATI

47、ONS Verbatim 7.3.1AUX FINS DUTILISATION DANS LES EMPLACEMENTSSECS, HUMIDES OU MOUILLS3bDOUBLE INSULATION (or) DOUBLE INSULATED(or symbol shown in Figure 2)Verbatim, or symbol 7.3.2DOUBLE ISOLATION ou ISOLATION DOUBLE(ou le symbole illustr la Figure 2)4b“neutral”, “W”, “N”, (or) “white” Verbatim 4.8.

48、7.1“neutre”, “B”, “N”, ou “blanc”5 MANUFACTURERS IDENTIFICATION Verbatim, or symbol 7.1.1(a)IDENTIFICATION DU FABRICANT6b“white” Verbatim 4.8.7.3“blanc”7bSUITABLE FOR WET LOCATIONS Verbatim 4.15.1CONVIENT AUX EMPLACEMENTS MOUILLS8bSUITABLE FOR DAMP LOCATIONS (or) RISK OFELECTRIC SHOCK DO NOT USE WHE

49、RE DIRECTLYEXPOSED TO WATERVerbatim 4.15.1CONVIENT AUX EMPLACEMENTS HUMIDES ou RISQUEDE CHOC LECTRIQUE NE PAS UTILISER SI EXPOSDIRECTEMENT LEAU9 distinctive catalog number or the equivalent 7.1.1(b)un numro de catalogue particulier ou lquivalent10 electrical rating 7.1.1(c)des caractristiques lectriques nominalesDECEMBER 18, 2014CAN/ULC-S8754 ANSI/UL 8754AMENDMENT 1Table B.1 Continued on Next PageTable B.1 (Continued)Item Product markingsaText Text reference11bThe appropriate conductor siz