ANSI CSA AM CSA HGV 4.1-2013 Standard for Hydrogen dispensing systems (First Editiion).pdf

1、ANSI/CSA HGV 4.1-2013Standard for hydrogen dispensing systemsLegal Notice for StandardsCanadian Standards Association and CSA America, Inc. (operating as “CSA Group”) develop standards through a consensusstandards development process approved by the Standards Council of Canada. This process brings t

2、ogether volunteers representingvaried viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process andestablishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content ofstandards.Disclaim

3、er and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, withoutlimitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, orits

4、non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, orcurrency of any of the information published in this document. CSA Group makes no representations or warranties regarding thisdocuments compliance with any applicable statute,

5、rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES,DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OREXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPEC

6、IAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE,BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED INCONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROMACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT,

7、EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCHDAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or onbehalf of any person or entity or to perform any duty owed by any pe

8、rson or entity to another person or entity. The information inthis document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Groupaccepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information co

9、ntained in thisdocument. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power,nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ow

10、nershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or theauthorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to thecontrary), and all inventions a

11、nd trade secrets that may be contained in this document, whether or not such inventions and tradesecrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, ordisclosure of this document may violate laws that protect CSA Groups and/

12、or others intellectual property and may give rise to aright in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted bylicence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is

13、 drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shallnot be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination ofthe validity of any such patent rights is

14、entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document isauthorized to do only the following:If this document is in electronic form:load this document onto a computer for t

15、he sole purpose of reviewing it;search and browse this document; andprint this document if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to havesuch copies, and only if this Legal Notice appears on each

16、such copy.In addition, users may not and may not permit others toalter this document in any way or remove this Legal Notice from the attached standard;sell this document without authorization from CSA Group; ormake an electronic copy of this document.If you do not agree with any of the terms and con

17、ditions contained in this Legal Notice, you may not load or use this document ormake any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of thisdocument constitutes your acceptance of the terms and conditions of this Legal Notice.Stand

18、ards Update ServiceANSI/CSA HGV 4.1-2013March 2013Title:Standard for hydrogen dispensing systemsPagination:34 pages, each dated March 2013To register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register fo

19、r updates to this publication is 2422624.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.Standard DevelopersAPPROVEDCSA AMERICA INC.Operating as “CSA Gr

20、oup”8501 East Pleasant Valley RoadCleveland, Ohio 44131CANADIAN STANDARDS ASSOCIATIONOperating as “CSA Group”5060 Spectrum Way, Suite 100Mississauga, Ontario, Canada L4W 5N6TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”Published in March 2013 by CSA GroupVisit our Onl

21、ine Store at shop.csa.caAMERICAN NATIONAL STANDARDANSI/CSA HGV 4.1-2013First Edition - 2013This Standard is based on the Temporary Interim Requirement forHydrogen dispensing systemsCSA America HGV 4.1-2009March 14, 2013American National Standards Institute, Inc.American National Standards InstituteR

22、esponsibility of approving American National Standards rests with theAmerican National Standards Institute, Inc.25 West 43rd Street, Fourth FloorNew York, NY10036The American National Standards Institute (ANSI), Inc. is the nationally recognized coordinator of voluntary standards development in the

23、United States through which voluntary organizations, representing virtually every technical discipline and every facet of trade and commerce, organized labor and consumer interests, establish and improve the some 10,000 national consensus standards currently approved as American National Standards.A

24、NSI provides that the interests of the public may have appropriate participation and representation in standardization activity, and cooperates with departments and agencies of U.S. Federal, state and local governments in achieving compatibility between government codes and standards and the volunta

25、ry standards of industry and commerce.ANSI represents the interests of the United States in international nontreaty organizations such as the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). The Institute maintains close ties with regional

26、 organizations such as the Pacific Area Standards Congress (PASC) and the Pan American Standards Commission (COPANT). As such, ANSI coordinates the activities involved in the U.S. participation in these groups.ANSI approval of standards is intended to verify that the principles of openness and due p

27、rocess have been followed in the approval procedure and that a consensus of those directly and materially affected by the standards has been achieved. ANSI coordination is intended to assist the voluntary system to ensure that national standards needs are identified and met with a set of standards t

28、hat are without conflict or unnecessary duplication in their requirements.PrefaceThis publication represents a standard for safe operation, substantial and durable construction and performance testing of the mechanical and electrical features of newly manufactured hydrogen gas dispensing systems for

29、 vehicles, intended primarily to dispense fuel directly into the vehicle fuel storage container.This standard is based on engineering principles, research and the combined expertise of manufacturers, users, and others having specialized experience.Nothing in this standard is to be considered in any

30、way as indicating a measure of quality beyond compliance with the provisions it contains. It is designed to allow compliance of products which may exceed that specified in the provisions herein. In its preparation, full recognition has been given to possibilities of improvement through ingenuity of

31、design. This standard is subject to revision as further experience and investigation may show it is necessary and desirable.CSA Group, does not assume or undertake to discharge any responsibility of the manufacturer or any other party. CSA Group shall not incur any obligation or liability for damage

32、s, including consequential damages, arising out of or in connection with the use, interpretation of or reliance upon this standard.Users of this American National Standard are advised that the devices/products/activities within its scope may be subject to regulation at the federal, state, or local l

33、evels. Users are strongly urged to investigate this possibility through appropriate channels. In the event of a conflict with this standard, the federal, state, or local regulations should be followed.CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The proced

34、ures of the American National Standards Institute, Inc., require that action be taken to reaffirm, revise or withdraw this standard no later than five (5) years from the date of approval. Purchasers of American National Standards may receive current information on all standards by calling or writing

35、 the American National Standards Institute, Inc., 25 West 43rd Street, Fourth Floor, New York, N.Y. 10036, (212) 642-4900.EFFECTIVE DATE: An organization using this standard for product evaluation as a part of its certification program will normally establish the date by which all products certified

36、 by that organization should comply with this standard.History Of The Development Of ANSI/CSA HGV 4.1(This History is informative and is not part of the standard.)NOTE: This is the first edition of ANSI/CSA America HGV 4.1.In September 2002, CSA met with the U.S. Department of Energy, Renewable Fuel

37、s Group in Washington, D.C. to discuss standards development opportunities in the hydrogen technology area. During this meeting, DOE requested that CSA provide a proposal relating to the development of hydrogen technology standards and codes in the United States. Industry recognized that an importan

38、t consideration in the successful commercialization of hydrogen gas as a vehicle fuel was the issue of codes and standards, pertaining to both fueling stations and vehicle fuel system components. CSA undertook the goal of establishing a program for the development of an organized family of coordinat

39、ed standards that addresses hydrogen gas vehicles and fueling stations.Industry and CSA recognized there was no standard that addressed safety requirements for hydrogen dispensing systems. The development of such a standard was necessary based on industry needs and feedback: (1) There were no standa

40、rds available for hydrogen dispenser applications at the 700 bar pressure levels. (2) Automotive OEMs driving the application of hydrogen as a fuel for vehicles expressed concern over solutions in demonstration projects in the field. The focus of the hydrogen dispensing system standard established p

41、erformance based requirements for the mechanical and electrical features and construction of newly manufactured systems that dispense hydrogen gas for vehicles, intended primarily to dispense fuel directly into the vehicle fuel storage container.CSA has positioned itself as a leader in the fuel cell

42、, hydrogen and natural gas sectors as a Standards Developing Organization (SDO). CSA is aggressively updating and developing national standards, and is playing a major role in the promulgation of US technologies nationally. As US TAG Administrator to IEC TC 105 for Fuel Cell Technologies and as US T

43、AG members of ISO TC 197 and ISO TC 22 / SC 25, CSA is facilitating US technology internationally. CSA organized committees to address technical issues in the development of standards which would affect future expansion of the hydrogen industry.The HGV 4.1 hydrogen dispensing systems standard was pr

44、ocessed as an American National Standard in accordance with procedures of the American National Standards Institute (ANSI).This is the first edition of the HGV 4.1 hydrogen dispensing systems standard, and was approved by the American National Standards Institute, Inc. on March 14, 2013.Joint Automo

45、tive Technical CommitteeLivio Gambone Powertech Labs Inc. (Chairman)Joe Cohen Air Products and Chemicals Inc.Douglas Horne Clean Vehicle Education FoundationJohn Jordan Fab Enterprises, LLCSusana Katz S. Katz and Associates Inc.Norman Newhouse Lincoln Composites Inc.Gini Sage General Motors of Canad

46、a LimitedStan Sinclair Southern California Gas CompanyNeel Sirosh Quantum Fuel Systems Technologies Worldwide, Inc.Mike Spears SSP Fittings Corp.Rhoads Stephenson Motor Vehicle Fire Research InstituteNGV/HGV 4.1 Technical Advisory CommitteeRobert Boyd Boyd Hydrogen LLCJoe Cohen Air Products and Chem

47、icals Inc.Ron Czischke Underwriters LaboratoriesJohn Dimmick Clean Vehicle Education FoundationHajime Fukumoto Japan Automobile Research InstituteBryan Gordon Nuvera Fuel Cells, Inc.Karen Hall Fuel Cell and Hydrogen Energy AssociationAaron Harris Nuvera Fuel Cells, Inc.Douglas Horne Clean Vehicle Ed

48、ucation Foundation (Alternate)Terry Jackson Accuflex Industrial Hose LimitedSusana Katz S. Katz and Associates Inc.Samuel Lam Ministry of TransportationSteven Mathison Honda Rb. Drawings, blueprints, or photographs which describe each model dispenser, as specified by the certification agency;c. Maxi

49、mum operating pressure in kilopascals (pounds per square in); d. Electrical rating; ande. Installation instructions.1.2.22The assembled system shall be cleaned in accordance with recognized industry practice so as not to affect fuel quality as established under the Hydrogen Fuel Quality for Fuel Cell Vehicles, SAE J2719.1.2.23While inactive, a dispenser hose shall be pressurized to a pressure greater than atmospheric pressure.1.3 Housing1.3.1Housings shall be made of suitable materials and finished with appropriated coatings. Housing will be durable, and facilitate normal operation of