ANSI CSA AM NGV 1-2017 Compressed natural gas vehicle (NGV) fueling connection devices (Third Edition Incorporates Erata March 2017).pdf

1、REVISED MARCH 2017CSA/ANSI NGV 1-2017Compressed natural gas vehicle (NGV) fueling connection devicesLegal Notice for StandardsCanadian Standards Association and CSA America, Inc. (operating as “CSA Group”) develop standards through a consensus standards development process approved by the Standards

2、Council of Canada and the American National Standards Institute. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consens

3、us, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions conc

4、erning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no re

5、presentations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL

6、DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY

7、 OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render profession

8、al or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no r

9、esponsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance w

10、ith the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are pr

11、otected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized

12、 use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licenc

13、e or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights.

14、Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is autho

15、rized to do only the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed on

16、ly to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authori

17、zation from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy the

18、m immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Revision HistoryCSA/ANSI NGV 1-2017, Compressed natural gas vehicle (NGV) fueling connection devicesErrata March 2017 Revision symbol (in margin)PrefaceStandards Update ServiceCSA/ANSI NG

19、V 1-2017March 2017Title: Compressed natural gas vehicle (NGV) fueling connection devicesTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2425001.If you

20、require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.CSA Group American National Standards InstituteThe Canadian Standards Association (operating as CSA Group),

21、 under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for- profit, nonstatutory, voluntary membership association engaged in standards development and certification

22、 activities. CSA Group standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and

23、 federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment.Individuals, companies, and associations across Canada indicate their support for CSA Groups standards development by volunteering their time and skills to Committe

24、e work and supporting CSA Groups objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSA Groups total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSA Gro

25、ups standards development activities.CSA Group offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, CSA Group regularly and continually audits and inspects products that bear the CSA

26、 Group Mark.In addition to its head office and laboratory complex in Toronto, CSA Group has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, CSA Group has developed the necessary expertise to meet its corporate mission: CSA Gr

27、oup is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.The American National Standards

28、Institute (ANSI), Inc. is the nationally recognized coordinator of voluntary standards development in the United States through which voluntary organizations, representing virtually every technical discipline and every facet of trade and commerce, organized labor and consumer interests, establish an

29、d improve the some 10,000 national consensus standards currently approved as American National Standards. ANSI provides that the interests of the public may have appropriate participation and representation in standardization activity, and cooperates with departments and agencies of U.S. Federal, st

30、ate and local governments in achieving compatibility between government codes and standards and the voluntary standards of industry and commerce.ANSI represents the interests of the United States in international nontreaty organizations such as the International Organization for Standardization (ISO

31、) and the International Electrotechnical Commission (IEC). The Institute maintains close ties with regional organizations such as the Pacific Area Standards Congress (PASC) and the Pan American Standards Commission (COPANT). As such, ANSI coordinates the activities involved in the U.S. participation

32、 in these groups.ANSI approval of standards is intended to verify that the principles of openness and due process have been followed in the approval procedure and that a consensus of those directly and materially affected by the standards has been achieved. ANSI coordination is intended to assist th

33、e voluntary system to ensure that national standards needs are identified and met with a set of standards that are without conflict or unnecessary duplication in their requirements.For further information on CSA Group services, write to CSA Group 178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1

34、R3Responsibility of approving American standards rests with the American National Standards Institute, Inc. 25 West 43rd Street, Fourth floor New York, NY 10036ISBN 978-1-4883-0675-4 2017 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the

35、prior permission of the publisher.Published in March 2017 by CSA Group A not-for-profit private sector organization 178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3 To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747

36、-4044.A trademark of the Canadian Standards Association and CSA America Inc., operating as “CSA Group”American National Standards Institute, Inc.Interprovincial Gas Advisory CouncilApproved on February 23, 2017 by ANSIApproved on February 28, 2017 by IGACCompressed natural gas vehicle (NGV) fueling

37、connection devicesCSA/ANSI NGV 1-2017CSA/ANSI NGV 1-2017 Compressed natural gas vehicle (NGV) fueling connection devicesMarch 2017 2017 CSA Group 1ContentsInterprovincial Gas Advisory Council 3Technical Committee on Natural Gas Powered Vehicles and Fueling 5Joint Automotive Technical Committee 7Tech

38、nical SubCommittee on Standards for Natural Gas Fueling Vehicle Receptacle and Fueling Connection Devices 10Preface 121 Scope 142 Reference publications 153 Definitions 174 Construction 184.1 General construction and assembly 184.2 Nozzles 194.3 Standard receptacle dimensions 254.4 Receptacles 284.5

39、 Three-way valve 294.6 Interchangeability 304.7 Instructions 314.8 Marking 325 Performance 335.1 General 335.2 User/machine interface 345.3 Dropping 355.4 Receptacle protective caps 355.5 Leakage at room temperature 365.6 Valve operating handle 365.7 Abnormal loads 365.8 User rocking/twisting 385.9

40、Mounting hardware torque 385.10 Low and high temperatures 385.10.1 General 385.10.2 Leakage 385.10.3 Operation 395.11 Durability and maintainability 395.11.1 Nozzle durability cycling 395.11.2 Receptacle durability cycling 445.11.3 Nozzles and receptacles 445.12 Service pressure compatibility 455.13

41、 Atmospheric exposure 46CSA/ANSI NGV 1-2017 Compressed natural gas vehicle (NGV) fueling connection devicesMarch 2017 2017 CSA Group 25.13.1 General 465.13.2 Oxygen-aging test 465.13.3 Ozone 465.13.4 Non-metallic synthetic material immersion test 465.13.5 Electrical resistance 475.14 Hydrostatic str

42、ength 475.15 Corrosion resistance 485.15.1 General 485.15.2 Salt spray exposure 485.15.3 Accelerated cyclic corrosion 485.16 Excess torque resistance 515.17 Non-igniting evaluation 515.18 Pressure tight protective caps 525.18.1 Leakage 525.18.2 Durability cycling 535.18.3 Abuse test 535.18.4 Ball im

43、pact test 535.18.5 Corrosion resistance 545.18.6 Hydrostatic test 546 Manufacturing and production test plan 54CSA/ANSI NGV 1-2017 Compressed natural gas vehicle (NGV) fueling connection devicesMarch 2017 2017 CSA Group 3Interprovincial Gas Advisory Council J.R. Marshall Technical Standards suggesti

44、ons for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquiriescsagroup.org and include “Proposal for change” in the subject line: a) Standard designation (number);b) relevant clause, table, and/or figure numb

45、er;c) wording of the proposed change; andd) rationale for the change.6) To submit a request for interpretation of this Standard, please send the following information to inquiriescsagroup.org and include “Request for interpretation” in the subject line: a) define the problem, making reference to the

46、 specific clause, and, where appropriate, include an illustrative sketch;b) provide an explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are

47、 processed in accordance with the CSA Directives and guidelines governing standardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.CSA/ANSI NGV 1-2017 Compressed natural gas vehicle (NGV) fueling connection devicesMarch 2017 2017 CSA Group 13CSA Group

48、acknowledges that the development of this Standard was made possible, in part, by the financial support ofCSA/ANSI NGV 1-2017 Compressed natural gas vehicle (NGV) fueling connection devicesMarch 2017 2017 CSA Group 14CSA/ANSI NGV 1-2017Compressed natural gas vehicle (NGV) fueling connection devices1

49、 Scope1.1 This Standard applies to newly produced compressed Natural Gas Vehicle (NGV) fueling connection devices, hereinafter referred to as “devices”, constructed entirely of new, unused parts and materials. NGV fueling connection devices consist of the following components, as applicable:a) receptacle and protective cap (mounted on vehicle) (see Clause 4.4);b) nozzle (see Clause 4.2); andc) three-way valve (external to nozzle and mounted in the fuel dispenser system) (see Clause 4.5).1.2 This Standard applies to devices that have a service pressure of either