ANSI CSA AM Z21.20--2014 CAN CSA-C22.2 NO.60730-2-5-14-2014 Automatic electrical controls for household and similar use - Part 2-5 Particular requirements for automatic electrical .pdf

1、ANSI Z21.20-2014 CAN/CSA-C22.2 No. 60730-2-5-14Automatic electrical controls for household and similar use Part 2-5: Particular requirements for automatic electrical burner control systems(IEC 60730-2-5:2000+A1:2004+A2:2008, MOD)ANSI Z21.20-2014 CAN/CSA-C22.2 No. 60730-2-5-14(IEC 60730-2-5:2000+A1:2

2、004+A2:2008, MOD)National Standard of Canada IEC 2009. CSA Group 2014. All rights reserved. Unauthorized reproduction is strictly prohibited.Legal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approv

3、ed by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independen

4、tly test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitn

5、ess for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warrantie

6、s regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, CO

7、STS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OU

8、T OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for

9、or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever

10、arising in any way from any and all use of or reliance on the information contained in this document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the

11、standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, a

12、ll trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, cop

13、ying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group

14、reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard

15、are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the fo

16、llowing:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ equal access and effective participation by concerned interests; respect for diverse interests and identification of those who should

17、 be afforded access to provide the needed balance of interests; mechanism for dispute resolution; openness and transparency; open access by interested parties to the procedures guiding the standards development process; clarity with respect to the processes; and Canadian interest consideration as th

18、e initial basis for the development of standards. A National Standard of Canada (NSC) is a standard prepared or reviewed by an SCC-accredited SDO and approved by the SCC according to NSC approval requirements. Approval does not refer to the technical content of the standard, as this remains the resp

19、onsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers) and others with relevant interests, as ma

20、y be appropriate to the subject at hand. NSCs are intended to make a significant and timely contribution to the Canadian interest. Those who have a need to apply standards are encouraged to use NSCs. These standards are subject to periodic review. Users of NSCs are cautioned to obtain the latest edi

21、tion from the SDO that publishes the standard. The responsibility for approving standards as NSCs rests withStandards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario, K1P 6N7CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note

22、 that it remains the responsibility of the users to judge its suitability for their particular purpose.TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”Cette Norme Nationale du Canada est disponible en versions franaise et anglaise.American National Standards InstituteRe

23、sponsibility of approving American National Standards rests with theAmerican National Standards Institute, Inc.25 West 43rd Street, Fourth FloorNew York, NY10036The American National Standards Institute (ANSI), Inc. is the nationally recognized coordinator of voluntary standards development in the U

24、nited States through which voluntary organizations, representing virtually every technical discipline and every facet of trade and commerce, organized labor and consumer interests, establish and improve the some 10,000 national consensus standards currently approved as American National Standards.AN

25、SI provides that the interests of the public may have appropriate participation and representation in standardization activity, and cooperates with departments and agencies of U.S. Federal, state and local governments in achieving compatibility between government codes and standards and the voluntar

26、y standards of industry and commerce.ANSI represents the interests of the United States in international nontreaty organizations such as the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). The Institute maintains close ties with regional

27、organizations such as the Pacific Area Standards Congress (PASC) and the Pan American Standards Commission (COPANT). As such, ANSI coordinates the activities involved in the U.S. participation in these groups.ANSI approval of standards is intended to verify that the principles of openness and due pr

28、ocess have been followed in the approval procedure and that a consensus of those directly and materially affected by the standards has been achieved. ANSI coordination is intended to assist the voluntary system to ensure that national standards needs are identified and met with a set of standards th

29、at are without conflict or unnecessary duplication in their requirements.AMERICAN NATIONAL STANDARD ANSI Z21.20-2014 NATIONAL STANDARD OF CANADA CAN/CSA-C22.2 No. 60730-2-5-14 First Edition 2014 Automatic electrical controls for household and similar use Part 2-5: Particular requirements for automat

30、ic electrical burner control systems This Standard is based on ANSI Z21.20-2007 CSA C22.2 No. 199-2007 UL 372 ANSI Z21.20a-2010 CSA C22.2 No. 199a-2010 UL 60730-1 CAN/CSA-E60730-1:13 (IEC 60730-1; IEC 60730-2-5) (IEC 60730-1; IEC 60730-2-5) APPROVED IGAC September 17, 2013 June 5, 2013 American Nati

31、onal Standards Institute, Inc. Interprovincial Gas Advisory Council Effective in Canada January 1, 2015 Standards Developer CSA Group Underwriters Laboratories CSA Group 8501 East Pleasant Valley Rd 333 Pfingsten Rd 5060 Spectrum Way, Suite 100 Cleveland, Ohio 44131 Northbrook, Illinois 60062 Missis

32、sauga, ON, Canada L4W 5N6 Published January 2014 Copyright 2014 CSA Group Permission is granted to republish material herein in laws or ordinances, and in regulations, administrative orders, or similar documents issued by public authorities. Those desiring permission for other republication should c

33、onsult CSA Group, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6. Copyright 2014 CSA Group Permission is granted to republish material herein in laws or ordinances, and in regulations, administrative orders, or similar documents issued by public authorities. Those desiring permis

34、sion for other republication should consult CSA Group, 8501 East Pleasant Valley Road, Cleveland, Ohio 44131. History of the Development of the Standard for Automatic Electrical Controls for Household and Similar Use Part 2: Particular Requirements for Automatic Burner Ignition Systems and Component

35、s (This History is informative and is not part of the standard.) With the onset of the Free Trade Agreement between the United States and Canada on January 2, 1988, significant attention was given to the harmonization of the United States and Canadian safety standards, addressing gas-fired equipment

36、 for residential, commercial and industrial equipment. It was believed that the elimination of the differences between the standards would remove potential trade barriers and provide an atmosphere in which North American manufacturers could market more freely in the United States and Canada. The har

37、monization of these standards was also seen as a preliminary step toward harmonization with international standards, which was to become a necessity as Europe moved toward its goal to form the Economic Community (EC) by the early 1990s. With the formation of joint subcommittees, a Canadian Gas Assoc

38、iation Standards Steering Committee on Gas Burning Appliances and Related Accessories was established to parallel Accredited Standards Committees Z21 and Z83, and to support the formation of joint subcommittees. Operating procedures, in accordance with American National Standards Institute procedure

39、s, for joint subcommittees were developed and subsequently approved by ANSI on April 1, 1993. At its August 1993 meeting, the Z21/CGA Joint Thermostat and Automatic Gas Ignition Systems Subcommittee established a working group to develop a proposal for the joint subcommittee to harmonize the U.S./Ca

40、nadian standards with the IEC 730 series of standards to address ignition systems. At its April 1994 meeting, the Ignition Harmonization Working Group agreed to recommend that the working group develop a single volume standard for ignition systems and components using IEC 730-2-5, Automatic Electric

41、al Controls for Household and Similar Use, Part 2: Particular Requirements for Automatic Electrical Burner Control Systems, as the base document. The working group recommended that the single standard for ignition systems and components would incorporate coverage as necessary from ANSI Z21.20, Ameri

42、can National Standard for Automatic Gas Ignition Systems as Components, CAN/CSA-C22.2 No. 199, National Standard of Canada for Combustion Safety Controls and Solid-State Igniters for Gas- and Oil-Burning Equipment, and UL 372, Standard for Safety, Primary Safety Controls for Gas- and Oil-Fired Appli

43、ances. At its July 1994 meeting, the Z21/CGA Joint Thermostat and Automatic Gas Ignition Systems Subcommittee requested its Ignition Harmonization Working Group to proceed with its recommendation and develop a single volume harmonized standard for automatic ignition systems and components for gas- a

44、nd oil-fired equipment. The Ignition Harmonization Working Group met on numerous occasions to develop the single volume harmonized standard for automatic ignition systems and components for gas- and oil-fired equipment. At its November 1998 meeting, the Joint Automatic Gas Control Subcommittee adopt

45、ed the recommended single volume harmonized standard for automatic ignition systems and components for gas- and oil-fired equipment for distribution for review and comment. At its September 2000 meeting, the Joint Automatic Gas Control Subcommittee requested the Ignition Harmonization Working Group

46、to develop a Part 2 standard for automatic ignition systems and components for gas- and oil-fired equipment. The joint subcommittee requested that the Part 2 standard use UL 60730-1, Automatic Electrical Controls for Household and Similar Use, Part 1: General Requirements as the Part 1 standard in t

47、he U.S. and CAN/CSA-E60730-1, Automatic Electrical Controls for Household and Similar Use Part 1: General Requirements as the Part 1 standard in Canada. At its November 2001 meeting, the Joint Automatic Gas Control Subcommittee adopted the recommended standard for Particular Requirements for Automat

48、ic Burner Ignition Systems and Components, Part 2, for distribution for review and comment. The draft Part 2 standard was distributed for review and comment during July 2002. At its October 2002 meeting, the draft Part 2 standard was reconsidered and revised in light of comments received and the dra

49、ft standard was recommended to the Z21/83 Committee and the CSA Technical Committee for consideration. The first edition of the harmonized Z21/CSA/UL Standard for Automatic Electrical Controls for Household and Similar Use Part 2: Particular Requirements for Automatic Burner Ignition Systems and Components, was approved by the American National Standards Institute, Inc. on May 14, 20