ANSI CSA AM Z21.21-2015 CSA 6.5-2015 Automatic valves for gas appliances (Fifth Edition).pdf

1、ANSI Z21.21-2015 CSA 6.5-2015Automatic valves for gas appliancesLegal Notice for StandardsCanadian Standards Association and CSA America, Inc. (operating as “CSA Group”) develop standards through a consensus standardsdevelopment process approved by the Standards Council of Canada and the American Na

2、tional Standards Institute. This process bringstogether volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Groupadministers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, eva

3、luate, or verify thecontent of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditions concerning this documents fitness for a parti

4、cular purpose or use, its merchantability, or its non-infringementof any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the informationpublished in this document. CSA Group makes no representations or warranties regarding this

5、documents compliance with any applicablestatute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS,OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HO

6、WSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGEDDATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS,WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHERTHEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM AC

7、CESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUPHAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of anyperson

8、or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directedto those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoeverarising in any way from any a

9、nd all use of or reliance on the information contained in this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it

10、 publishes.Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwi

11、se noted to the contrary), and allinventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected bypatents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this documen

12、t mayviolate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectualproperty rig

13、hts in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not beheld responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determinatio

14、n of the validity ofany such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic

15、 form: load this document onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have suchcopies

16、 and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this documen

17、t.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this documentconstitutes your acceptance of

18、the terms and conditions of this Legal Notice.Revision HistoryANSI Z21.212015 CSA 6.52015Revisions from 4th edition Revision symbol (inmargin)Clauses 1.3, 1.11, 5.4, 5.6.1, 5.9.1, 6.11, and 7.3.3Standards Update ServiceANSI Z21.21-2015 CSA 6.5-2015July 2015Title: Automatic valves for gas appliancesT

19、o register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2423738.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA

20、Groups policy on privacy at www.csagroup.org/legal to find out how we protect yourpersonal information.CSA GroupAmerican National StandardsInstituteThe Canadian Standards Association (operating as“CSA Group”), under whose auspices this NationalStandard has been produced, was chartered in 1919and acc

21、redited by the Standards Council of Canada tothe National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membershipassociation engaged in standards development andcertification activities.CSA Group standards reflect a national consensus ofproducers and users including manu

22、facturers,consumers, retailers, unions and professionalorganizations, and governmental agencies. Thestandards are used widely by industry and commerceand often adopted by municipal, provincial, andfederal governments in their regulations, particularlyin the fields of health, safety, building andcons

23、truction, and the environment.Individuals, companies, and associations acrossCanada indicate their support for CSA Groupsstandards development by volunteering their time andskills to Committee work and supporting CSA Groupsobjectives through sustaining memberships. The morethan 7000 committee volunt

24、eers and the 2000sustaining memberships together form CSA Groupstotal membership from which its Directors are chosen.Sustaining memberships represent a major source ofincome for CSA Groups standards developmentactivities.CSA Group offers certification and testing services insupport of and as an exte

25、nsion to its standardsdevelopment activities. To ensure the integrity of itscertification process, CSA Group regularly andcontinually audits and inspects products that bear theCSA Group Mark.In addition to its head office and laboratory complexin Toronto, CSA Group has regional branch offices inmajo

26、r centres across Canada and inspection andtesting agencies in eight countries. Since 1919, CSAGroup has developed the necessary expertise to meetits corporate mission: CSA Group is an independentservice organization whose mission is to provide anopen and effective forum for activities facilitating t

27、heexchange of goods and services through the use ofstandards, certification and related services to meetnational and international needs.The American National Standards Institute (ANSI), Inc.is the nationally recognized coordinator of voluntarystandards development in the United States throughwhich

28、voluntary organizations, representing virtuallyevery technical discipline and every facet of trade andcommerce, organized labor and consumer interests,establish and improve the some 10,000 nationalconsensus standards currently approved as AmericanNational Standards.ANSI provides that the interests o

29、f the public mayhave appropriate participation and representation instandardization activity, and cooperates withdepartments and agencies of U.S. Federal, state andlocal governments in achieving compatibility betweengovernment codes and standards and the voluntarystandards of industry and commerce.A

30、NSI represents the interests of the United States ininternational nontreaty organizations such as theInternational Organization for Standardization (ISO)and the International Electrotechnical Commission(IEC). The Institute maintains close ties with regionalorganizations such as the Pacific Area Stan

31、dardsCongress (PASC) and the Pan American StandardsCommission (COPANT). As such, ANSI coordinates theactivities involved in the U.S. participation in thesegroups.ANSI approval of standards is intended to verify thatthe principles of openness and due process have beenfollowed in the approval procedur

32、e and that aconsensus of those directly and materially affected bythe standards has been achieved. ANSI coordination isintended to assist the voluntary system to ensure thatnational standards needs are identified and met with aset of standards that are without conflict orunnecessary duplication in t

33、heir requirements.For further information on CSA Group services, writetoCSA Group178 Rexdale Boulevard,Toronto, Ontario,Canada M9W 1R3Responsibility of approving American standards restswith theAmerican National Standards Institute, Inc.25 West 43rd Street, Fourth floorNew York, NY 10036ISBN 978-1-7

34、7139-950-0 2015 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoeverwithout the prior permission of the publisher.Published in July 2015 by CSA GroupA not-for-profit private sector organization178 Rexdale Boulevard,Toronto, Ontario, Canada M9W 1R3To purc

35、hase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mark of the Canadian Standards Association and CSA America Inc., operating as “CSA Group”American National Standards Institute, Inc.Interprovincial Gas Advisory Co

36、uncilApproved on June 19, 2015 by ANSIApproved on June 26, 2015 by IGACEffective in Canada March 31, 2017Automatic valves for gas appliancesANSI Z21.21-2015 CSA 6.5-2015ANSI Z21.21-2015 CSA 6.5-2015Automatic valves for gas appliancesJuly 2015 2015 CSA Group 1ContentsInterprovincial Gas Advisory Coun

37、cil 3Technical Committee on Performance and Installation of Gas Burning Appliances and RelatedAccessories (Z21/83) 5CSA Technical Committee on Gas Appliances and Related Accessories 8Z21/CSA Joint Technical Sub-committee on Standards for Automatic Gas Controls 10Preface 131 Scope 162 Reference publi

38、cations 173 Definitions 194 Construction 214.1 General 214.2 Equipment and data to be furnished by the manufacturer 224.3 Assembly 234.4 Connections 234.5 Bolts, nuts, and screws 254.6 Adjustments 264.7 Electrical 264.8 Materials 264.9 Instructions 274.10 Marking 275 Performance 285.1 General 285.2

39、Test gases 295.3 Strength and deformation 295.4 Leakage 335.5 Mounting for testing 345.6 Capacity 355.7 Electrical operating characteristics 395.8 Dielectric strength 425.9 Integrity of operation 435.10 Gas cracking 485.11 Continued operation 485.12 Resistance to permanent damage at excessive supply

40、 pressures 505.13 Internal explosion resistance 515.14 Marking material adhesion and legibility 526 Commercial/industrial safety shutoff valves - construction 52ANSI Z21.21-2015 CSA 6.5-2015Automatic valves for gas appliancesJuly 2015 2015 CSA Group 27 Commercial/industrial safety shutoff valves - p

41、erformance 557.3 Continued operation 557.4 Closing time 567.5 Valve closure on gas pressure surge 567.6 Nonmetallic materials 568 Manufacturing and production tests 579 Items unique to the United States 589.1 Electrical 589.1.1 Insulating material 589.1.2 Conductors and connections 599.1.3 Current-c

42、arrying parts 599.1.4 Grounding 609.1.5 Bonding 609.1.6 Switches 609.1.7 Transformers 609.1.8 Spacing 609.1.9 Barriers 649.1.10 Enclosures 6510 Items unique to Canada 65Annex A (informative) Preferred graphic symbols of commonly used items, extracted from ANSI/IEEEStandard 315, Graphic Symbols for E

43、lectrical and Electronics Diagrams, andabbreviations for these items 67Annex B (informative) Table of conversion factors 73ANSI Z21.21-2015 CSA 6.5-2015Automatic valves for gas appliancesJuly 2015 2015 CSA Group 3Interprovincial Gas Advisory CouncilJ.R. Marshall Technical Standards b) relevant claus

44、e, table, and/or figure number;c) wording of the proposed change; andd) rationale for the change.6) To submit a request for interpretation of this Standard, please send the following information toinquiriescsagroup.org and include “Request for interpretation” in the subject line:a) define the proble

45、m, making reference to the specific clause, and, where appropriate, include anillustrative sketch;b) provide an explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address theissue.Commi

46、ttee interpretations are processed in accordance with the CSA Directives and guidelines governingstandardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.ANSI Z21.21-2015 CSA 6.5-2015Automatic valves for gas appliancesJuly 2015 2015 CSA Group 14History

47、 of the development of Automatic valves for gas appliancesNote: This history is informative and is not part of the standard.With the onset of the Free Trade Agreement between the United States and Canada on January 2, 1988,significant attention was given to the harmonization of the United States and

48、 Canadian safety standardsaddressing gas-fired equipment for residential, commercial and industrial applications. It was believedthat the elimination of the differences between the standards would remove potential trade barriersand provide an atmosphere in which North American manufacturers could ma

49、rket more freely in theUnited States and Canada. The harmonization of these standards was also seen as a step towardharmonization with international standards.With the formation of joint subcommittees, a Canadian Gas Association Standards Steering Committeeon Gas Burning Appliances and Related Accessories was established to parallel Accredited StandardsCommittees Z21 and Z83, and to support the formation of joint subcommittees. Operating procedures,in accordance with American National Standards Institute procedures, for joint subcommittees