ANSI CSA C22.2 NO.104-11-2011 Humidifiers (Fourth Edition Update No 1 April 2016).pdf

1、C22.2 No. 104-11HumidifiersLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to ach

2、ieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any repres

3、entations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA

4、does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES

5、, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DA

6、TA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COS

7、TS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to

8、those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary stand

9、ards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is

10、 the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protec

11、ted by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, mo

12、dification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held re

13、sponsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-comm

14、ercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Limited copies of this d

15、ocument in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attache

16、d standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such

17、 copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Update No. 1C22.2 No. 104-11April 2016Note: For information about the Standards Update Service, go to shop.csa.ca or e-mail techsupportcsagroup.org

18、.Title: Humidifiers originally published April 2011The following revisions have been formally approved and are marked by a vertical line in the margin on the attached replacement pages:Revised Title page, copyright page, and Preface, Clauses 3.2.1, 5.2.5, 5.3.2, 19.14, 25.5, 31.2.2, 36.1.1, 36.2.2,

19、36.2.3, 36.2.11, and 56.1, Supplement SA, and Annex ANew Clause 25.7 and Figure 8ADeleted None Update your copy by inserting these revised pages.Keep the pages you remove for reference.CSA GroupCSA C22.2 No. 104-11Fourth EditionUnderwriters Laboratories Inc.UL 998Fifth EditionHumidifiersApril 25, 20

20、11(Title Page Reprinted: April 4, 2016)ANSI/UL 998-2016Commitment for AmendmentsThis standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”), andUnderwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standardmay be submitted to

21、 CSA Group or UL at anytime. Revisions to this standard will be made only afterprocessing according to the standards development procedures of CSA Group and UL. CSA Group andUL will issue revisions to this standard by means of a new edition or revised or additional pages bearingtheir date of issue.I

22、SBN 978-1-55491-623-8 2016 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever without theprior permission of the publisher.This Standard is subject to review five years from the date of publication, and suggestions for itsimprovement will be referred t

23、o the appropriate committee. To submit a proposal for change, pleasesend the following information to inquirescsagroup.org and include Proposal for change in thesubject line: Standard designation (number); relevant clause, table, and/or figure number; wording ofthe proposed change; and rationale for

24、 the change.To purchase CSA Group Standards and related publications, visit CSA Groups Online Store atshop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044.Copyright 2016 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a S

25、tandardshould be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the sole and exclusive property of UL.This ANSI/UL Standard for Safety consists of the Fifth Edition including revisions through April 4, 2016.The most recent de

26、signation of ANSI/UL 998 as an American National Standard (ANSI) occurred onApril 4, 2016. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, TitlePage (front and back), or the Preface.Comments or proposals for revisions on any part of the Standard may be submitted to U

27、L at any time.Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative StandardsDevelopment System (CSDS) at http:/.To purchase UL Standards, visit Comm 2000 at http:/m- call toll-free 1-888-853-3503.CONTENTSPREFACE 6INTRODUCTION1 Scope .72 Definitions 73 General 93.1 Compon

28、ents .93.2 Reference publications .103.3 Units of measurement 10B3.4 Terminology 11CONSTRUCTION4 General .115 Enclosures 115.1 General 115.2 Nonmetallic materials 135.3 Enclosure integrity .146 Doors and Covers .157 Accessibility of Uninsulated Hazardous Voltage Live Parts and Film-Coated Wire 168 P

29、rotection Against Risk of Injury to Persons Mechanical Protection 179 Protection Against Risk of Injury to Persons Materials 1810 Protection Against Risk of Injury to Persons Switches, Controls, and Interlocks .1811 Protection Against Risk of Injury to Persons Surface Temperatures .2012 Stability 20

30、13 Strength of Handles .2014 Strength of Mounting 2015 Mechanical Assembly .2116 Liquid-Containing Parts 2117 Protection Against Corrosion .2218 Cord-Connected Products .2219 Permanently Connected Products .2320 Leads and Terminals 2421 Flexible Cords 2622 Strain Relief 2723 Bushings 2824 Current-Ca

31、rrying Parts .28A25 Internal Wiring 28A26 Protection of Wiring 28B27 Wiring Connections 28B28 Electrical Insulation .2929 Separation of Circuits .3130 Secondary Circuits 3330.1 General .3330.2 Extra-low-voltage circuits 3331 Grounding .3431.1 General .3431.2 Permanently connected products .3531.3 Co

32、rd-connected products 36APRIL 4, 2016 CSA C22.2 NO. 104-11 UL 998 331.4 Bonding of internal parts 3632 Bonding Means .3733 Capacitors .3834 Coil Windings 3835 Heating Elements .3936 Motors .3936.1 General .3936.2 Motor overload protection .4036.3 Short circuit protection 4237 Overcurrent Protection

33、4238 Protection Against Overheating .4339 Receptacles 4540 Switches and Controllers 4541 Electrically Operated Valves and Solenoids 4642 Spacings 4643 Thermal Insulation 4744 Wetting Live Parts 4845 Internal Plumbing .4846 Filters .4847 Pressure Vessels and Parts Subjected to Pressure .4848 Protecti

34、on of Service Personnel 5048.1 General .5048.2 Construction .5149 Duct- and Plenum-Mounted Products .5350 Construction of Duct- and Plenum-Mounted Products .5350.1 Installation .5350.2 Polymeric material 5350.3 Evaporation pad .5450.4 Supply cord .54PERFORMANCE51 General Test Parameters 5451.1 Gener

35、al .5451.2 Voltage .5551.3 Ambient temperatures 5552 Leakage-Current Test .5553 Humidity-Conditioning Test .5654 Operation Test .5755 Starting Test .5756 Input Test 5757 Normal-Temperature Test 5857.1 All products 5857.2 Duct- or plenum-mounted products .6158 Disassembly and Reassembly Test .6159 Im

36、pact .6160 Rotating Members 6261 Dielectric Voltage-Withstand Test .6262 Strain-Relief Test .6362.1 General .6362.2 Through-cord switch 6363 Power-Supply Cord Push-Back Relief Test .6364 Cable-Clamp Test 63APRIL 4, 2016CSA C22.2 NO. 104-11 UL 998465 Abnormal Operation Test 6465.1 General .6466 Therm

37、al Cutoff Test .6467 Gasket Test 6468 Liquid-Container Test .6569 Flooding of Live Parts Test 6570 Backflow Test 6671 Bonding-Conductor Test .6772 Tests on Parts Subject to Pressure .6773 Mold Stress-Relief Test 68RATINGS74 Electrical Ratings .69MARKING AND INSTRUCTIONS75 Identification and Ratings

38、6976 Informational and Instructional Markings .7377 Operating Instructions .7378 Field Wiring 74TABLES AND FIGURESTables 76Figures .87SUPPLEMENT SA - SMART ENABLED HUMIDIFIERSSA1 Scope .97SA2 Construction 98SA2.1 Controls .98SA2.2 Separation of circuits 99SA2.3 Communication and display devices 99SA

39、2.4 Communication conductors and cables .100SA2.5 Communication connectors .100SA2.6 Smart enabled or remote operation 100SA3 Functional Safety 101SA4 Resistance to Electro Magnetic Phenomena (Immunity) 101SA5 Markings and Instructions 102Annex A Standards for componentsAnnex B French translations a

40、nd markingsAnnex C Manufacturing and Production TestsAPRIL 4, 2016 CSA C22.2 NO. 104-11 UL 998 5PREFACEThis is the harmonized CSA Group and UL Standard for Humidifiers. It is the fourth edition of CSA-C22.2No. 104 and the fifth edition of UL 998. This harmonized standard has been jointly revised on

41、April 4,2016. For this purpose, CSA Group and UL are issuing revision pages dated April 4, 2016.This harmonized Standard was prepared by CSA Group and Underwriters Laboratories Inc. (UL). Theefforts and support of the Air Conditioning and Refrigeration Institute (ARI) and the Heating, Refrigeratinga

42、nd Air Conditioning Institute of Canada (HRAI) are gratefully acknowledged.This Standard is considered suitable for use for conformity assessment within the stated scope of theStandard.This Standard was reviewed by the CSA Subcommittee on Humidifiers, under the jurisdiction of the CSATechnical Commi

43、ttee on Consumer and Commercial Products and the Strategic Steering Committee onRequirements for Electrical Safety, and has been formally approved by the CSA Technical Committee.This standard has been approved by the American National Standards Institute (ANSI) as an AmericanNational Standard.Applic

44、ation of StandardWhere reference is made to a specific number of samples to be tested, the specified number isconsidered a minimum quantity.Note: Although the intended primary application of this standard is stated in its scope, it is important tonote that it remains the responsibility of the users

45、of the standard to judge its suitability for their particularpurpose.Level of HarmonizationThis standard uses the IEC format but is not based on, nor is it considered equivalent to, an IEC standard.This standard is published as an identical standard for CSA Group and UL.An identical standard is a st

46、andard that is exactly the same in technical content except for nationaldifferences resulting from conflicts in codes and governmental regulations. Presentation is word for wordexcept for editorial changes.InterpretationsThe interpretation by the standards development organization of an identical or

47、 equivalent standard isbased on the literal text to determine compliance with the standard in accordance with the proceduralrules of the standards development organization. If more than one interpretation of the literal text has beenidentified, a revision is to be proposed as soon as possible to eac

48、h of the standards developmentorganizations to more accurately reflect the intent.APRIL 4, 2016CSA C22.2 NO. 104-11 UL 9986HUMIDIFIERSINTRODUCTION1 Scope1.1 These requirements cover humidifiers rated 600 V or less, and intended to be used in accordancewith the National Electrical Code (NEC), ANSI/NF

49、PA 70, and the Rules of the Canadian Electrical Code(CEC), Part I, C22.1.1.2 These requirements cover humidifiers intended for residential and commercial use. This includeshumidifiers of the centrifugal atomizing type, evaporative-media type, water-injection type, steam type,and the like. The humidifiers may be for installation in a room, mounted on a wall or a ceiling, or for ductor plenum mounting.1.3 These requirements apply to equipment that includes an electric heating element to heat air or water,or