ANSI CSA C22.2 NO.107.3-14-2014 Uninterruptible power systems (Third Edition Update No 1 October 2017).pdf

1、C22.2 No. 107.3-14Uninterruptible power systemsLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing va

2、ried viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityTh

3、is document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third

4、 partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO

5、EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMA

6、GES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS

7、BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to an

8、other person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this do

9、cument. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs betwee

10、n CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secre

11、ts that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others in

12、tellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to

13、the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely

14、 their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSE

15、OFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ relevant clause, table, and/or figure number; wording ofthe proposed change; and rationale for the change.To purchase CSA Group Standards and related publications, visit CSA Groups Online Store atshop.csa.ca or call toll-free 1

16、-800-463-6727 or 416-747-4044.Copyright 2017 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standardshould be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall r

17、emain the sole and exclusive property of UL.This ANSI/UL Standard for Safety consists of the Fifth Edition including revisions through October 12,2017. The most recent designation of ANSI/UL 1778 as an American National Standard (ANSI)occurred on October 10, 2017. ANSI approval for a standard does n

18、ot include the Cover Page,Transmittal Pages, Title Page (front and back), or the Preface.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative StandardsDevelopment System (C

19、SDS) at https:/.To purchase UL Standards, visit ULs Standards Sales Site at http:/ or call toll-free 1-888-853-3503.Annex JJJ (normative) French translations and markingsAnnex LLL (informative) Examples of US and Canadian regulatory requirementsAnnex MMM (normative) Test and construction requirement

20、s for UPS with fault current ratingshigher than those specified in Table NNN.5MMM.1 Short-circuit current .88MMM.2 Maximum 100 000 ampere short-circuit current rating without short-circuit test .88MMM.2.1 Scope .88MMM.2.2 Construction .89MMM.2.3 Performance 102MMM.2.4 Marking 104Annex NNN (normative

21、) Short-circuit withstand ratingNNN.1 Rating verification and marking 106NNN.2 Short-time withstand current .106NNN.2.1 General 106NNN.2.2 Modes of operation .106NNN.3 Test procedure .106NNN.3.1 General application 106NNN.3.2 Sample selection .110NNN.3.3 Sample preparation .111NNN.3.4 Line (input) c

22、onnections .112NNN.3.5 Load (output) connections .113NNN.3.6 Short-circuit test procedure 115NNN.3.7 Test circuit calibration .116NNN.3.8 Short-circuit test 117NNN.4 Compliance criteria 119NNN.5 Markings .120NNN.5.1 UPS not requiring protection by a specific overcurrent device 120NNN.5.2 UPS depende

23、nt on use of a specific overcurrent device .121NNN.5.3 UPS dependent on use of a current-limiting device .121Annex OOOAnnex PPP (normative) Manufacturing and production testsPPP.1 Production-Line Dielectric Voltage-Withstand Test .125PPP.2 Production-Line Grounding-Continuity Test .126JUNE 13, 2014

24、CSA C22.2 NO. 107.3-14 UL 1778 5PrefaceThis is the harmonized CSA Group and UL Standard for Uninterruptible Power Systems (UPS). It is thethird edition of CSA C22.2 No. 107.3 and the fifth edition of UL 1778. This harmonized standard has beenjointly revised on October 12, 2017.This harmonized Standa

25、rd was prepared by CSA Group and Underwriters Laboratories Inc. (UL). Theefforts and support of the National Electrical Manufacturers Association (NEMA) and Electro-FederationCanada (EFC) are gratefully acknowledged.This standard is considered suitable for use for conformity assessment within the st

26、ated scope of thestandard.This Standard was reviewed by the CSA Subcommittee on Uninterruptible Power Systems, under thejurisdiction of the CSA Technical Committee on Industrial Products and the CSA Strategic SteeringCommittee on Requirements for Electrical Safety, and has been formally approved by

27、the CSA TechnicalCommittee.This Standard has been approved by the American National Standards Institute (ANSI) as an AmericanNational Standard.Application of StandardWhere reference is made to a specific number of samples to be tested, the specified number is to beconsidered a minimum quantity.Note:

28、 Although the intended primary application of this standard is stated in its scope, it is important to note thatit remains the responsibility of the users of the standard to judge its suitability for their particular purpose.The Standard is intended to be used in conjunction with the applicable requ

29、irements of CAN/CSA-C22.2No. 60950-1-07 and UL 60950-1, March 2007, second edition, which is referred to in this Standard as theReference Document (RD). Compliance will be determined by the requirements located inCAN/CSA-C22.2 No. 60950-1-07 and UL 60950-1, March 2007, second edition, with deviation

30、s presentedin the third edition of CSA C22.2 No. 107.3 and the fifth edition of UL 1778.Level of HarmonizationThis Standard is published as an equivalent standard for CSA Group and UL. An equivalent standard isa standard that is substantially the same in technical content, except as follows: Technic

31、al nationaldifferences are allowed for codes and governmental regulations as well as those recognized as being inaccordance with NAFTA Article 905, for example, because of fundamental climatic, geographical,technological, or infrastructural factors, scientific justification, or the level of protecti

32、on that the countryconsiders appropriate. Presentation is word for word except for editorial changes.InterpretationsThe interpretation by the standards development organization of an identical or equivalent standard isbased on the literal text to determine compliance with the standard in accordance

33、with the proceduralrules of the standards development organization. If more than one interpretation of the literal text has beenidentified, a revision is to be proposed as soon as possible to each of the standards developmentOCTOBER 12, 2017CSA C22.2 NO. 107.3-14 UL 17786organizations to more accura

34、tely reflect the intent.OCTOBER 12, 2017 CSA C22.2 NO. 107.3-14 UL 1778 7Uninterruptible Power Systems1 General1.1 ScopeReplace this clause of the RD with the following:1.1.1 Equipment covered by this StandardThis Standard applies to UNINTERRUPTIBLE POWER SYSTEMS (UPS). The primary function of the U

35、PS for thisStandard is to ensure continuity of an alternating power source. The UNINTERRUPTIBLE POWER SYSTEM may alsoserve to improve the quality of the power source by keeping it within specified characteristics. ThisStandard is applicable to movable, stationary, fixed, and built-in UPS for distrib

36、ution systems up to 600 Va.c. This equipment is designed to be installed in accordance with the Canadian Electrical Code, Part I,CSA C22.1, or the National Electrical Code, ANSI/NFPA 70, and, unless otherwise identified, theStandard for the Protection of Electronic Computer Data-Processing Equipment

37、, ANSI/NFPA 75.This Standard specifies requirements intended to ensure safety for the OPERATOR and, where specificallystated, for SERVICE PERSONNEL.This Standard is intended to reduce the risk of fire, electric shock, or injury to persons from installedequipment, both as a single unit or as a system

38、 of interconnected units, subject to installing, operating,and maintaining the equipment in the manner prescribed by the manufacturer.1.1.2 Additional requirementsIn addition to the requirements in this Standard, a UPS is to comply with the UPS-relevant requirementsof CAN/CSA-C22.2 No. 60950-1/UL 60

39、950-1, March 2007, second edition, Information TechnologyEquipment Safety Part 1: General requirements (RD), as applicable for the country where the productwill be used. Wherever there is a conflict between the requirements of this Standard and the RD, therequirements of this Standard will prevail.E

40、ngine-driven d.c. power generators intended to provide backup power for the battery supply circuit of UPSunits are investigated for compliance with the requirements of UL 2200, and CSA C22.2 No. 100.UPS that employ hospital grade components identified by the markings Hospital Only, Hospital Grade”,o

41、r a green dot on the BODY of the component, or otherwise implying suitability for medical use, areevaluated to the requirements of this Standard and CAN/CSA-C22.2 No. 60601-1/UL 60601-1.Requirements additional to those specified in this Standard may be necessary for equipment intended foruse where i

42、ngress of water is possible; for guidance on such requirements and on relevant testing, seeAnnex LLL and Annex T/RD.OCTOBER 12, 2017CSA C22.2 NO. 107.3-14 UL 177881.1.3 ExclusionsThese requirements do not cover UPS units for use as legally required standby systems, described inArticle 701 of the Nat

43、ional Electrical Code, ANSI/NFPA 70, and emergency power supply described inSection 46 of the Canadian Electrical Code, Part I, CSA C22.1. See Annex LLL.Where considered appropriate, revision of requirements will be proposed and adopted in conformancewith the methods employed for development, revisi

44、on, and implementation of this Standard.NOTE 1: For equipment subject to transient overvoltages exceeding those for Category II according to IEC 60664,additional protection might be necessary. Such additional protection may be located in the AC MAINS SUPPLY tothe equipment or in the equipment as an

45、integral design feature.NOTE 2 Where the additional protection is an integral part of the equipment insulation requirements, CREEPAGEDISTANCES and CLEARANCE distances from the mains through to the load side of the additional protection maybe judged as Category III or IV as required. All insulation r

46、equirements, CREEPAGE DISTANCES, andCLEARANCE distances on the load side of the additional protection may be judged as Category I or II as required.1.1.4 Additional applicationsThis Standard does not cover all types of UPS, but it may be taken as a guide for such equipment.Requirements additional to

47、 those specified in this Standard are in some cases necessary for specificapplications, e.g.,a) equipment intended for operation while exposed to conditions such as extremes oftemperature; excessive dust, moisture, or vibration; flammable gases; or corrosive or explosiveatmospheres;b) UPS equipment

48、based on rotary machinery;c) UPS equipment meeting emergency lighting and power requirements as specified in UL 924;and central power system described in CSA C22.2 No 141-10.Additional subclause:JUNE 13, 2014 CSA C22.2 NO. 107.3-14 UL 1778 91.1.101 Normative referencesAny undated reference to a code

49、 or standard appearing in the requirements of this Standard shall beinterpreted as referring to the latest edition of that code or standard.Products covered by this Standard are to comply with the reference installation codes and standards asnoted (in Annex III) as appropriate for the country where the product is to be used. When the produc