ANSI CSA C22.2 NO.213-17-2017 Nonincendive electrical equipment for use in Class I and II Division 2 and Class III Divisions 1 and 2 hazardous (classified) locations (Third Edition.pdf

1、C22.2 No. 213-17Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locationsLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development pr

2、ocess approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does no

3、t independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this do

4、cuments fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations

5、or warranties regarding this documents compliance with any applicable statute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJUR

6、Y, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY,

7、 ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other se

8、rvices for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility

9、whatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the conten

10、ts of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by cop

11、yright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modifica

12、tion, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, C

13、SA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this

14、standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do on

15、ly the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons

16、who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CS

17、A Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately.

18、 Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceC22.2 No. 213-17September 2017Title: Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locationsTo

19、register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2425511.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Gr

20、oups policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.CSA GroupCSA C22.2 No. 213-17Third EditionUnderwriters Laboratories Inc.UL 121201Ninth EditionNonincendive Electrical Equipment for Use in Class I and II, Division2 and Class III, Divisions 1 and 2

21、Hazardous (Classified) LocationsSEPTEMBER 15, 2017ANSI/UL 121201-2017Commitment for AmendmentsThis standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”) andUnderwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standardmay be

22、 submitted to CSA Group or UL at anytime. Revisions to this standard will be made only afterprocessing according to the standards development procedures of CSA Group, and UL. CSA Groupand UL will issue revisions to this standard by means of a new edition or revised or additional pagesbearing their d

23、ate of issue.ISBN 978-1-4883-0927-4 2017 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever without theprior permission of the publisher.This Standard is subject to review five years from the date of publication, and suggestions for itsimprovement will

24、 be referred to the appropriate committee. To submit a proposal for change, pleasesend the following information to inquirescsagroup.org and include Proposal for change in thesubject line: Standard designation (number); relevant clause, table, and/or figure number; wording ofthe proposed change; and

25、 rationale for the change.To purchase CSA Group Standards and related publications, visit CSA Groups Online Store atshop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044.Copyright 2017 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electron

26、ic copy of a Standardshould be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the sole and exclusive property of UL.This ANSI/UL Standard for Safety consists of the Ninth Edition. The most recent designation ofANSI/UL 121201

27、as an American National Standard (ANSI) occurred on September 15, 2017. ANSIapproval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front andback), or the Preface. The National Difference Page and IEC Foreword are also excluded from theANSI approval of IEC-based stand

28、ards. Any other portions of this ANSI/UL standard that were notprocessed in accordance with ANSI/UL requirements are noted at the beginning of the impactedsections.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a P

29、roposal Request in ULs On-Line Collaborative StandardsDevelopment System (CSDS) at https:/.To purchase UL Standards, visit ULs Standards Sales Site at http:/ or call toll-free 1-888-853-3503.CONTENTSPREFACE 61 Scope .91.1 Introduction 91.2 Applicable to Class I and II, Division 2 and Class III, Divi

30、sions 1 and 2 locations .91.3 Applicable to associated nonincendive field wiring apparatus .101.4 Applicable ambient conditions .101.5 Not applicable to specified ignition mechanisms .101.6 Not applicable to specific products .102 Reference publications .103 Definitions 104 General requirements 154.

31、1 Requirements based upon normal operating conditions 154.2 General-purpose requirements 154.3 Consideration of subsequent conditions following nonincendive field wiring faults .154.4 Component standards .155 Requirements for Class I, Division 2 equipment .155.1 General 155.2 Enclosures .165.3 Fuses

32、 used in circuits subject to overloading .165.4 Fuses replaceable from outside of the enclosure 175.5 Circuit breakers .175.6 Batteries and battery-powered equipment 176 Requirements for Class II, Division 2, Class III, Divisions 1 and 2 equipment 176.1 Protection methods .176.2 Portable battery-pow

33、ered equipment .186.3 Thermal ignition .196.4 Gasket and seal specification .197 Nonincendive circuits and nonincendive field wiring 197.1 Spark ignition evaluation .197.2 Nonincendive circuit evaluation 197.3 Evaluation by analysis .207.4 Associated nonincendive field wiring apparatus .207.5 Noninc

34、endive field wiring apparatus .217.6 Nonincendive field wiring circuit .217.7 Interconnection of nonincendive field wiring apparatus with associated nonincendive fieldwiring apparatus .218 Normally nonarcing components .228.1 Components considered as nonarcing in normal operation .228.2 Connectors a

35、nd plug-in components .228.3 Plug-in fuses that can be replaced in normal operating conditions .228.4 Circuit breakers .228.5 Lamps .238.6 Connectors .238.7 Manually operated components .238.8 Connections on exterior of enclosure 239 Marking .259.1 General-purpose marking .259.2 Hazardous location r

36、elated marking 259.3 Information for battery-powered equipment .27SEPTEMBER 15, 2017 CSA C22.2 NO. 213-17 UL 121201 39.4 Nonincendive field wiring connections 279.5 Optional zone marking (US only) 299.6 Alternate use of Division parameter designations for nonincendive field wiring 309.7 Connectors a

37、nd lampholders 309.8 Fuseholders 319.9 Circuit breakers .319.10 External plugs and sockets 319.11 Oil immersed equipment 319.12 Multiple warning markings .3210 Surface temperature requirements 3210.1 Determination of maximum surface temperature .3210.2 Surface temperature 3210.3 Surface temperature

38、of small components .3311 Spark ignition testing of nonincendive circuits 3311.1 Spark test apparatus .3311.2 Ignition test conditions 3412 Evaluation of nonincendive components .3412.1 Ratings, preconditioning, and test for nonincendive components .3412.2 Spark ignition test for nonincendive compon

39、ents .3413 Evaluation of sealed devices .3513.1 Ratings, construction, preconditioning, and test for sealed devices .3513.2 Air leakage test 3614 Evaluation of enclosed-break devices .3614.1 Ratings, construction, preconditioning, and test for enclosed-break devices .3614.2 Tests for enclosed-break

40、devices .3715 Enclosure ingress protection for Class II and III 3715.1 Construction and tests for enclosures .3715.2 Dust-blast method 3815.3 Circulating dust method .3815.4 Atomized-water method .3915.5 Gasket test 3915.6 Temperature aging .4016 Drop tests and impact tests 4016.1 Portable equipment

41、 .4016.2 Drop test for portable equipment .4116.3 Impact test for fixed or stationary equipment used in Class I location .4116.4 Impact test for fixed or stationary equipment used in Class II or Class III location 4117 Evaluation of an oil immersed equipment 4117.1 General .4117.2 Enclosure .4217.3

42、Oil requirements .4217.4 Temperature test .4218 Manufacturers instructions .4218.1 Information in addition to that required by general-purpose standards .4218.2 Information for connections on exterior of enclosure 4318.3 Information for equipment with nonincendive field wiring connections .4318.4 In

43、formation for component replacement or equipment disconnection 4418.5 Information for equipment containing nonincendive components .44SEPTEMBER 15, 2017CSA C22.2 NO. 213-17 UL 1212014Annex A Normative References (normative)Annex B Common Standards Safety Requirements for Electrical Equipment (inform

44、ative)Annex C Suggested Warnings with French Equivalent (informative)SEPTEMBER 15, 2017 CSA C22.2 NO. 213-17 UL 121201 5PREFACEThis is the harmonized CSA Group and UL standard for Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Clas

45、sified) Locations. It is the Third edition of CSA-C22.2 No. 213 and the Ninth edition of UL 121201. This edition of CSA-C22.2 No. 213 supersedes the previous edition published in 2016. This edition of UL 121201 supersedes the previous ISA-12.12.01-2015 edition published on August 21, 2015.This harmo

46、nized standard was prepared by the CSA Group and Underwriters Laboratories Inc. (UL).Efforts have been made to synchronize the UL edition number with that of the previous corresponding ISAstandard with which this standard is now harmonized with CSA. As a result, one or more UL editionnumbers have be

47、en skipped to align per the previous ISA edition number.The ISA-12.12.01-2015 standard is being maintained until September 15, 2022 for reference purposesonly.This standard is considered suitable for use for conformity assessment within the stated scope of thestandard.This standard was reviewed by t

48、he CSA Integrated Committee on Hazardous Location Products, underthe jurisdiction of the CSA Technical Committee on Industrial Products and the CSA Strategic SteeringCommittee on Requirements for Electrical Safety, and has been formally approved by the CSA TechnicalCommittee.This standard has been a

49、pproved by the American National Standards Institute (ANSI) as an AmericanNational Standard.Application of StandardWhere reference is made to a specific number of samples to be tested, the specified number is to beconsidered a minimum quantity.Note: Although the intended primary application of this standard is stated in its scope, it is important to note thatit remains the responsibility of the users of the standard to judge its suitability for their particular purpose.Level of HarmonizationThis stand