ANSI CSA C22.2 NO.75-17-2017 Thermoplastic-Insulated Wires and Cables (Eleventh edition).pdf

1、C22.2 No. 75-17Thermoplastic-insulated wires and cablesLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers represe

2、nting varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of lia

3、bilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of a

4、ny third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation

5、IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTI

6、AL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GRO

7、UP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entit

8、y to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in

9、this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs b

10、etween CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade

11、secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or othe

12、rs intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is draw

13、n to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is ent

14、irely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form: load this document onto a computer for th

15、e sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each

16、 such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and

17、 conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice

18、Standards Update ServiceC22.2 No. 75-17July 2017Title: Thermoplastic-insulated wires and cablesTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2424592

19、If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.Association of Standardization and CertificationNMX-J-010-ANCE-2017Sixth EditionCSA GroupCSA C22.2

20、No. 75-17Eleventh EditionUnderwriters Laboratories Inc.UL 83Sixteenth EditionThermoplastic-Insulated Wires and CablesJuly 28, 2017ANSI/UL 83-2017Commitment for AmendmentsThis standard is issued jointly by the Association of Standardization and Certification (ANCE), theCanadian Standards Association

21、operating as CSA Group), and Underwriters Laboratories Inc. (UL).Comments or proposals for revisions on any part of the standard may be submitted to ANCE, CSAGroup, or UL at any time. Revisions to this standard will be made only after processing according tothe standards development procedures of A

22、NCE, CSA Group, and UL. CSA Group and UL will issuerevisions to this standard by means of a new edition or revised or additional pages bearing their dateof issue. ANCE will incorporate the same revisions into a new edition of the standard bearing the samedate of issue as the CSA Group and UL pages.C

23、opyright 2017 ANCERights reserved in favor of ANCE.ISBN 9781488304330 2017 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever without theprior permission of the publisher.This Standard is subject to review five years from the date of publication, and s

24、uggestions for itsimprovement will be referred to the appropriate committee. To submit a proposal for change, pleasesend the following information to inquirescsagroup.org and include Proposal for change in thesubject line: Standard designation (number); relevant clause, table, and/or figure number;

25、wording ofthe proposed change; and rationale for the change.To purchase CSA Group Standards and related publications, visit CSA Groups Online Store atshop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044.Copyright 2017 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by

26、UL. Neither a printed nor electronic copy of a Standardshould be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain the sole and exclusive property of UL.This ANSI/UL Standard for Safety consists of the Sixteenth Edition. The mos

27、t recent designation ofANSI/UL 83 as an American National Standard (ANSI) occurred on July 28, 2017. ANSI approval fora standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or thePreface. The National Difference Page and IEC Foreword are also excluded from the AN

28、SI approval ofIEC-based standards.The Department of Defense (DoD) has adopted UL 83 on February 27, 1984. The publication of revisedpages or a new edition of this Standard will not invalidate the DoD adoption.Comments or proposals for revisions on any part of the Standard may be submitted to UL at a

29、ny time.Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative StandardsDevelopment System (CSDS) at https:/.To purchase UL Standards, visit ULs Standards Sales Site at http:/ or call toll-free 1-888-853-3503.CONTENTSPREFACE 61 Scope .82 General 82.1 Units of measure .82.2

30、 Reference publications 92.3 Summary of requirements 122.4 General requirements 123 Definitions 124 Construction .124.1 Conductors .124.2 Insulation .174.3 Nylon jacket 194.4 Assemblies that include thermoplastic-insulated single conductors .195 Test requirements 195.1 General 195.2 Conductor resist

31、ance 205.3 Tests on aluminum conductors 205.4 Short-term insulation resistance at elevated temperature in water .215.5 Long-term insulation resistance in water acceptance criteria 215.6 Long-term insulation resistance in air for 90C rated conductors 225.7 Capacitance and relative permittivity of wet

32、 rated (W type) wires 235.8 Flexibility at room temperature after aging 235.9 Heat shock .235.10 Cold bend and cold impact 245.11 Deformation .245.12 Flame and smoke 255.13 Weather (sunlight) resistance (optional) .285.14 Oil resistance (optional) .295.15 Gasoline and oil resistance (optional) .295.

33、16 Abrasion resistance (nylon-jacketed types or insulations other than PVC) .305.17 Crush resistance (nylon-jacketed types or insulations other than PVC) 305.18 Impact resistance (nylon-jacketed types or insulations other than PVC) .305.19 Durability of ink printing .305.20 Color coating 305.21 Long

34、term aging of insulation 315.22 A-C spark test .315.23 Dielectric voltage-withstand in water 315.24 Insulation resistance in water at 15C .325.25 Electrical continuity .326 Marking .326.1 Marking on product 326.2 Marking on package .356.3 Month and year of manufacture 367 Deep-well submersible wate

35、r pump cable .367.1 General 367.2 Construction 367.3 Marking 387.4 Tests 39JULY 28, 2017 NMX-J-010-ANCE-2017 CSA C22.2 NO. 75-17 UL 83 3TablesAnnex A (informative) Wire Type and Electrical Code Cross-Reference and Summary ofApplicationsAnnex B (normative for Mexico) Multiple-Conductor Thermoplastic-

36、Insulated and -Jacketed CablesB1 Scope .71B1.1 General .71B1.2 Single conductors 71B2 Lay of cabled conductors 71B3 Equipment-grounding conductor 72B4 Conductor identification .72B4.1 Color of insulated grounding conductor .72B4.2 Identification of ungrounded (phase) conductor(s) 72B4.3 Identificati

37、on of grounded conductor(s) .72B5 Fillers .72B6 Jacket separators .72B7 Jackets 72B7.1 General .72B7.2 Jacket thickness .73B8 Marking .73B8.1 Marking on product .73B8.2 Marking on package 73Annex C (informative) Summary of RequirementsAnnex D (normative) Chemical Composition of Recognized ACM or AA

38、8000 Series AluminumAlloy Conductor MaterialsAnnex E (normative) Copper-Clad Aluminum ConductorsE1 General .80E2 Sizes and stranding .80E3 Conductor resistance .80E4 Physical properties .80E5 Marking requirements .80JULY 28, 2017NMX-J-010-ANCE-2017 CSA C22.2 NO. 75-17 UL 834Annex F (informative) Met

39、ric SizesAnnex G (informative) Evaluation of Materials Having Characteristics Differing from Those in Table11Annex H (informative) French and Spanish Translations and MarkingsH1 General .86H2 Markings on wire .86H3 Markings on packaging 86JULY 28, 2017 NMX-J-010-ANCE-2017 CSA C22.2 NO. 75-17 UL 83 5

40、PREFACEThis is the harmonized ANCE, CSA Group, and UL Standard for Thermoplastic-Insulated Wires and Cables. It is the Sixth edition of NMX-J-010-ANCE, the Eleventh edition of CSA C22.2 No. 75, and the Sixteenth edition of UL 83. This edition of NMX-J-010-ANCE supersedes the previous edition publish

41、ed March 28, 2014. This edition of CSA C22.2 No. 75 supersedes the previous edition published in March 2014. This edition of UL 83 supersedes the previous edition published March 28, 2014.This harmonized standard was prepared by the Association of Standardization and Certification, (ANCE),CSA Group

42、and Underwriters Laboratories Inc. (UL). The efforts and support of the TechnicalHarmonization Committee for Electrical Wires and Cables, of the Council on the Harmonization ofElectrotechnical Standards of the Nations of the Americas (CANENA), are gratefully acknowledged.This standard is considered

43、suitable for use for conformity assessment within the stated scope of thestandard.The present Mexican Standard was developed by the CT 20 Conductores from the Comite deNormalizacion de la Asociacion de Normalizacion y Certificacion, A.C., CONANCE, with the collaborationof the SC 20B Conductores para

44、 Baja Tensin.This standard was reviewed by the CSA Integrated Committee on Fixed Installation Wires and Cable,under the jurisdiction of the CSA Technical Committee on Wiring Products and the CSA Strategic SteeringCommittee on Requirements for Electrical Safety, and has been formally approved by the

45、CSA TechnicalCommittee.This standard has been approved by the American National Standards Institute (ANSI) as an AmericanNational Standard.Application of StandardWhere reference is made to a specific number of samples to be tested, the specified number is to beconsidered a minimum quantity.Note: Alt

46、hough the intended primary application of this standard is stated in its scope, it is important to note thatit remains the responsibility of the users of the standard to judge its suitability for their particular purpose.Level of HarmonizationThis standard uses the IEC format but is not based on, no

47、r is it considered equivalent to, an IEC standard.This standard is published as an equivalent standard for ANCE, CSA Group, and UL.An equivalent standard is a standard that is substantially the same in technical content, except as follows:Technical national differences are allowed for codes and gove

48、rnmental regulations as well as thoserecognized as being in accordance with NAFTA Article 905, for example, because of fundamental climatic,geographical, technological, or infrastructural factors, scientific justification, or the level of protection thatthe country considers appropriate. Presentatio

49、n is word for word except for editorial changes.JULY 28, 2017NMX-J-010-ANCE-2017 CSA C22.2 NO. 75-17 UL 836Reasons for differences from IECThis standard provides requirements for insulated wires and cables for use in accordance with theelectrical installation codes of Canada, Mexico, and the United States. At present there is no IEC standardfor wires and cables for use in accordance with these codes. Therefore, this standard does not employany IEC standard for base requirements.Interpr