ANSI HI HYDRAUL HI 7.6-2012 Controlled-Volume Metering Pumps for Test (A137).pdf

1、6 Campus DriveFirst Floor NorthParsippany, New Jersey07054-4406 www.Pumps.org ANSI/HI7.6-2012ANSI/HI 7.6-2012American National Standard forControlled-Volume Metering Pumpsfor TestThis page intentionally blank.ANSI/HI 7.6-2012American National Standard forControlled-Volume Metering Pumpsfor TestSpons

2、orHydraulic Institute, Inc.www.Pumps.org Approved August 27, 2012American National Standards Institute, Inc.Hydraulic Institute Standards, Copyright 1997-2012, All Rights ReservedApproval of an American National Standard requires verification by ANSI that therequirements for due process, consensus a

3、nd other criteria for approval have been metby the standards developer.Consensus is established when, in the judgement of the ANSI Board of StandardsReview, substantial agreement has been reached by directly and materially affectedinterests. Substantial agreement means much more than a simple majori

4、ty, but not nec-essarily unanimity. Consensus requires that all views and objections be considered,and that a concerted effort be made toward their resolution.The use of American National Standards is completely voluntary; their existence doesnot in any respect preclude anyone, whether he has approv

5、ed the standards or not,from manufacturing, marketing, purchasing, or using products, processes, or proce-dures not conforming to the standards.The American National Standards Institute does not develop standards and will in nocircumstances give an interpretation of any American National Standard. M

6、oreover, noperson shall have the right or authority to issue an interpretation of an AmericanNational Standard in the name of the American National Standards Institute. Requestsfor interpretations should be addressed to the secretariat or sponsor whose nameappears on the title page of this standard.

7、CAUTION NOTICE: This American National Standard may be revised or withdrawn atany time. The procedures of the American National Standards Institute require thataction be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers ofAmerican National Standards may receive current in

8、formation on all standards by call-ing or writing the American National Standards Institute.Published ByHydraulic Institute, Inc.6 Campus Drive, First Floor NorthParsippany, NJ 07054-4406www.Pumps.org Copyright 2012 Hydraulic InstituteAll rights reserved.No part of this publication may be reproduced

9、 in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher.Printed in the United States of AmericaISBN 978-1-935762-08-9AmericanNationalStandardRecycledpaperHydraulic Institute Standards, Copyright 1997-2012, All Rights ReservediiiContentsPageFore

10、word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v7.6 Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11、 . . . . . . . . . . . . . . 17.6.1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.6.2 Types of tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12、 . . . . . . . . . . . . . . . . . . 17.6.3 Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.6.4 Performance test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13、 . . . . . . . . . . . . . . . . . . 6Appendix A Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Figures7.6.4.5 Generalized schematic for open or closed vented tank . . . . . . . . . . . . . . . . .

14、 . . . . . . . . . . . . . . . . . . . . 77.6.4.8.1 Plotting test results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Tables7.6.3.1 Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.6.3.2 Subscripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Hydraulic Institute Standards, Copyright 1997-2012, All Rights R

16、eservedThis page intentionally blank.Hydraulic Institute Standards, Copyright 1997-2012, All Rights ReservedvForeword (Not part of Standard)Purpose and aims of the Hydraulic InstituteThe purpose and aims of the Institute are to promote the continued growth and well-being of pump manufacturersand fur

17、ther the interests of the public in such matters as are involved in manufacturing, engineering, distribution,safety, transportation and other problems of the industry, and to this end, among other things:a) To develop and publish standards for pumps;b) To collect and disseminate information of value

18、 to its members and to the public;c) To appear for its members before governmental departments and agencies and other bodies in regard to mat-ters affecting the industry;d) To increase the amount and to improve the quality of pump service to the public;e) To support educational and research activiti

19、es;f) To promote the business interests of its members but not to engage in business of the kind ordinarily carried onfor profit or to perform particular services for its members or individual persons as distinguished from activitiesto improve the business conditions and lawful interests of all of i

20、ts members.Purpose of Standards1) Hydraulic Institute Standards are adopted in the public interest and are designed to help eliminate misun-derstandings between the manufacturer, the purchaser and/or the user and to assist the purchaser inselecting and obtaining the proper product for a particular n

21、eed.2) Use of Hydraulic Institute Standards is completely voluntary. Existence of Hydraulic Institute Standardsdoes not in any respect preclude a member from manufacturing or selling products not conforming to theStandards.Definition of a Standard of the Hydraulic InstituteQuoting from Article XV, S

22、tandards, of the By-Laws of the Institute, Section B:“An Institute Standard defines the product, material, process or procedure with reference to one or more of the fol-lowing: nomenclature, composition, construction, dimensions, tolerances, safety, operating characteristics, perfor-mance, quality,

23、rating, testing and service for which designed.”Comments from usersComments from users of this standard will be appreciated, to help the Hydraulic Institute prepare even more usefulfuture editions. Questions arising from the content of this standard may be directed to the Technical Director of theHy

24、draulic Institute. The inquiry will then be directed to the appropriate technical committee for provision of a suit-able answer.If a dispute arises regarding contents of an Institute standard or an answer provided by the Institute to a questionsuch as indicated above, the point in question shall be

25、sent in writing to the Technical Director of the Hydraulic Insti-tute, who shall initiate the appeals process.RevisionsThe Standards of the Hydraulic Institute are subject to constant review, and revisions are undertaken whenever it isfound necessary because of new developments and progress in the a

26、rt. If no revisions are made for five years, thestandards are reaffirmed using the ANSI canvass procedure.Units of measurementMetric units of measurement are used, and corresponding US customary units appear in parentheses. Charts,graphs, and example calculations are also shown in both metric and US

27、 customary units.Hydraulic Institute Standards, Copyright 1997-2012, All Rights ReservedviBecause values given in metric units are not exact equivalents to values given in US customary units, it is importantthat the selected units of measure be stated in reference to this standard. If no such statem

28、ent is provided, metricunits shall govern.Consensus for this standard was achieved by use of the Canvass MethodThe following organizations, recognized as having an interest in the standardization of controlled-volume meteringpumps, were contacted prior to the approval of this standard. Inclusion in

29、this list does not necessarily imply thatthe organization concurred with the submittal of the proposed standard to ANSI.A.W. Chesterton CompanyBrown i.e., test motornameplate to be recorded.6) Record auxiliary equipment data, such as pressure monitors, leakage detectors, alarms, etc.7) Make notation

30、s of calibration records and correction factors in accordance with instrumentation section. 8) Identity and qualification level(s) of test personnel.7.6.4.7 Performance test recordsWritten test results shall be furnished upon request. Details and type of report are to be agreed upon by the partiesin

31、volved.7.6.4.8 Performance test calculationsSee Table 7.6.3.1 for terms and units for the symbols used.7.6.4.8.1 Plotting performance test resultsLinearity of rate of flow versus percentage of flow can be plotted as ordinates on the same sheet, as shown in Fig-ure 7.6.4.8.1.Y = Flow rateX = Percent

32、of flow, adjustable by strokes per minute or stroke lengthm = Scaling factorB = Offset from zero (if any)7.6.4.9 Report of performance testWritten test results shall be furnished upon request. Details and type of report are to be agreed upon by the partiesinvolved.Hydraulic Institute Standards, Copy

33、right 1997-2012, All Rights ReservedHI Pumps Controlled-Volume Metering Pump Test 201212Flow RateMinimumFlow % Flow MaximumFlow %Y = mX + BTurndown RangeFigure 7.6.4.8.1 Plotting test resultsHydraulic Institute Standards, Copyright 1997-2012, All Rights ReservedAppendix A Index 201213Appendix AIndex

34、This appendix is not part of this standard, but is presented to help the user in considering factors beyond this standard.Note: an f. indicates a figure, and a t. indicates a table.Calculations, 11Controlled-volume metering pumps, 1Dampening devices, 8Data sheet, 9Discharge pipe or hose, 8Discharge

35、pressure gauge, 8Drive motor, 8Driver, 8Input speed measurement, 8Instrumentation, 6fluctuation and accuracy, 7Items utilized, 8Manufacturers standard production test, 6Net positive inlet pressure available (NPIPA), defined, 5Net positive inlet pressure required (NPIPR), defined, 6Net positive sucti

36、on head available (NPSHA)defined, 5means for adjusting to pump, 9Net positive suction head required (NPSHR), defined, 6Performance testing, 1acceptance tolerance, 6setup, 7test conditions, 1types of tests, 1variations in test procedures, 1vibration and acoustical testing methods not included, 1witne

37、ssing, 6Plotting test results, 11, 12f.Pump displacement, defined, 3Pump rate-of-flow measurementby direct reading meters, 9by volume, 8by weight, 8Rated condition point, defined, 3Records, 11Report, 11Schematic for open or closed vented tank, 7f.Stroke (L), defined, 3Subscripts, 3t.Suction pipe or

38、hose, 8Symbols, 2t.Temperature measurement of test liquid, 9Terminology, 1Test setup, 7, 7f.Total differential pressure (pH), defined, 5Total discharge pressure (pd), defined, 5Volume units, 3Volumetric efficiency (v), defined, 6Hydraulic Institute Standards, Copyright 1997-2012, All Rights ReservedThis page intentionally blank.Hydraulic Institute Standards, Copyright 1997-2012, All Rights ReservedA137