ANSI IAQ GUD OCC BLDG UND CONS-2007 IAQ GUIDELINES FOR OCCUPIED BUILDINGS UNDER CONSTRUCTION (SECOND EDITION).pdf

1、IAQ GUIDELINES FOROCCUPIED BUILDINGSUNDER CONSTRUCTIONSHEET METAL AND AIR CONDITIONING CONTRACTORSNATIONAL ASSOCIATION, INC.www.smacna.orgANSI/SMACNA 0082008IAQ GUIDELINES FOROCCUPIED BUILDINGSUNDER CONSTRUCTIONSECOND EDITION NOVEMBER, 2007SHEET METAL AND AIR CONDITIONING CONTRACTORSNATIONAL ASSOCIA

2、TION, INC.4201 Lafayette Center DriveChantilly, VA 201511209www.smacna.orgIAQ GUIDELINES FOR OCCUPIEDBUILDINGS UNDER CONSTRUCTIONCOPYRIGHT C0069 SMACNA 2006All Rights ReservedbySHEET METAL AND AIR CONDITIONING CONTRACTORSNATIONAL ASSOCIATION, INC.4201 Lafayette Center DriveChantilly, VA 201511209Pri

3、nted in the U.S.A.FIRST EDITION NOVEMBER, 1995SECOND EDITION NOVEMBER, 2007Except as allowed in the Notice to Users and in certain licensing contracts, no part of this book may bereproduced, stored in a retrievable system, or transmitted, in any form or by any means, electronic,mechanical, photocopy

4、ing, recording, or otherwise, without the prior written permission of the publisher.iiiIAQ Guidelines for Occupied Buildings Under Construction Second EditionFOREWORDIn an effort to provide SMACNA contractors, architects, engineers, building owners and managers, and the generalconstruction industry

5、with a researched, practical publication to assist in maintaining acceptable indoor air qualityduring building renovation, SMACNAs Building Services Committee developed the first edition of the IAQ Guide-lines for Occupied Buildings Under Construction. This manual has its roots in a workshop that to

6、ok place during theIAQ 1993 Conference that was cosponsored by SMACNA and other professional organizations. As the conferenceprogressed it became clear that, other than the combined experiences of the presenters and other specialized profes-sionals in attendance, there was little published technical

7、 guidance that dealt with the potential health hazards andannoyances related to carrying on construction activity in occupied buildings.This second edition of the IAQ Guideline has been updated and was passed through an additional review process usinga canvass review that meets SMACNAs American Nati

8、onal Standards Institute (ANSI) accredited procedures. TheANSI process assures that interested and affected parties have an opportunity to review, comment, and approve publi-cations as an ANSI standard document via a consensus process.The IAQ Guideline is intended to be an authoritative source for p

9、roviding project management guidance in maintain-ing satisfactory indoor air quality (IAQ) of occupied buildings undergoing renovation or construction. The Guidelinecovers how to manage the source of air pollutants, control measures, quality control and documentation, communica-tion with occupants.

10、It includes example projects, tables, references, resources, and checklists. The previous editionof the IAQ Guideline is referenced by the U.S. Green Building Councils LEED Green Building Rating System forExisting Buildings and New Construction. SMACNA recommends the guide to architects, engineers,

11、constructionmanagers, facility managers and building owners who will be involved in construction activities inside occupied build-ings. Additionally, the principles presented here are also applicable to IAQ problems encountered in occupied areasof buildings during the final phases of new constructio

12、n.Methods to identify and remediate lead, asbestos, or other materials that are classified as hazardous materials are notintended to be within the scope of this standard.SHEET METAL AND AIR CONDITIONING CONTRACTORSNATIONAL ASSOCIATION, INC.ivIAQ Guidelines for Occupied Buildings Under Construction S

13、econd EditionTASK FORCEMichael F. Mamayek, ChairmanIllingworth CorporationMilwaukee, WIPhil CorbinJ. F. Ahern Co.Fond Du Lac, WIRichard LackeyLackey Sheet Metal L.L.C.Saint Louis, MOJoseph R. LansdellPoynter Sheet Metal, Inc.Bloomington, INPeyton Collie, Staff LiaisonSMACNAChantilly, VATECHNICAL AUT

14、HOREd Light, CIHBuilding Dynamics, LLCAshton, MDvIAQ Guidelines for Occupied Buildings Under Construction Second EditionNOTICE TO USERSOF THIS PUBLICATION1. DISCLAIMER OF WARRANTIESa) The Sheet Metal and Air Conditioning Contractors National Association (quoteblleftSMACNA“) provides its product for

15、informationalpurposes.b) The product contains quoteblleftData“ which is believed by SMACNA to be accurate and correct but the data, including all information,ideas and expressions therein, is provided strictly quoteblleftAS IS,“ with all faults. SMACNA makes no warranty either express or impliedrega

16、rding the Data and SMACNA EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY ORFITNESS FOR PARTICULAR PURPOSE.c) By using the data contained in the product user accepts the Data quoteblleftAS IS“ and assumes all risk of loss, harm or injury that may resultfrom its use. User acknowledges t

17、hat the Data is complex, subject to faults and requires verification by competent professionals, andthat modification of parts of the Data by user may impact the results or other parts of the Data.d) IN NO EVENT SHALL SMACNA BE LIABLE TO USER, OR ANY OTHER PERSON, FOR ANY INDIRECT, SPECIAL ORCONSEQU

18、ENTIAL DAMAGES ARISING, DIRECTLY OR INDIRECTLY, OUT OF OR RELATED TO USERS USE OFSMACNAS PRODUCT OR MODIFICATION OF DATA THEREIN. This limitation of liability applies even if SMACNA has beenadvised of the possibility of such damages. IN NO EVENT SHALL SMACNAS LIABILITY EXCEED THE AMOUNT PAID BYUSER

19、FOR ACCESS TO SMACNAS PRODUCT OR $1,000.00, WHICHEVER IS GREATER, REGARDLESS OF LEGALTHEORY.e) User by its use of SMACNAs product acknowledges and accepts the foregoing limitation of liability and disclaimer of warrantyand agrees to indemnify and hold harmless SMACNA from and against all injuries, c

20、laims, loss or damage arising, directly or indi-rectly, out of users access to or use of SMACNAs product or the Data contained therein.2. ACCEPTANCEThis document or publication is prepared for voluntary acceptance and use within the limitations of application defined herein, andotherwise as those ad

21、opting it or applying it deem appropriate. It is not a safety standard. Its application for a specific project is contin-gent on a designer or other authority defining a specific use. SMACNA has no power or authority to police or enforce compliance withthe contents of this document or publication an

22、d it has no role in any representations by other parties that specific components are, infact, in compliance with it.3. AMENDMENTSThe Association may, from time to time, issue formal interpretations or interim amendments, which can be of significance betweensuccessive editions.4. PROPRIETARY PRODUCT

23、SSMACNA encourages technological development in the interest of improving the industry for the public benefit. SMACNA does not,however, endorse individual manufacturers or products.5. FORMAL INTERPRETATIONa) A formal interpretation of the literal text herein or the intent of the technical committee

24、or task force associated with the documentor publication is obtainable only on the basis of written petition, addressed to the Technical Resources Department and sent to theAssociations national office in Chantilly, Virginia. In the event that the petitioner has a substantive disagreement with the i

25、nterpreta-tion, an appeal may be filed with the Technical Resources Committee, which has technical oversight responsibility. The request mustpertain to a specifically identified portion of the document that does not involve published text which provides the requested informa-tion. In considering suc

26、h requests, the Association will not review or judge products or components as being in compliance with thedocument or publication. Oral and written interpretations otherwise obtained from anyone affiliated with the Association are unoffi-cial. This procedure does not prevent any committee or task f

27、orce chairman, member of the committee or task force, or staff liaisonfrom expressing an opinion on a provision within the document, provided that such person clearly states that the opinion is personaland does not represent an official act of the Association in any way, and it should not be relied

28、on as such. The Board of Directors ofSMACNA shall have final authority for interpretation of this standard with such rules or procedures as they may adopt for processingsame.b) SMACNA disclaims any liability for any personal injury, property damage, or other damage of any nature whatsoever, whethers

29、pecial, indirect, consequential or compensatory, direct or indirectly resulting from the publication, use of, or reliance upon this docu-ment. SMACNA makes no guaranty or warranty as to the accuracy or completeness of any information published herein.6. APPLICATIONa) Any standards contained in this

30、publication were developed using reliable engineering principles and research plus consultationwith, and information obtained from, manufacturers, users, testing laboratories, and others having specialized experience. They arevi IAQ Guidelines for Occupied Buildings Under Construction Second Edition

31、subject to revision as further experience and investigation may show is necessary or desirable. Construction and products which com-ply with these Standards will not necessarily be acceptable if, when examined and tested, they are found to have other features whichimpair the result contemplated by t

32、hese requirements. The Sheet Metal and Air Conditioning Contractors National Association andother contributors assume no responsibility and accept no liability for the application of the principles or techniques contained in thispublication. Authorities considering adoption of any standards containe

33、d herein should review all federal, state, local, and contractregulations applicable to specific installations.b) In issuing and making this document available, SMACNA is not undertaking to render professional or other services for or onbehalf of any person or entity. SMACNA is not undertaking to pe

34、rform any duty owed to any person or entity to someone else. Anyperson or organization using this document should rely on his, her or its own judgement or, as appropriate, seek the advice of a compe-tent professional in determining the exercise of reasonable care in any given circumstance.7. REPRINT

35、 PERMISSIONNonexclusive, royaltyfree permission is granted to government and private sector specifying authorities to reproduce only anyconstruction details found herein in their specifications and contract drawings prepared for receipt of bids on new construction andrenovation work within the Unite

36、d States and its territories, provided that the material copied is unaltered in substance and that thereproducer assumes all liability for the specific application, including errors in reproduction.8. THE SMACNA LOGOThe SMACNA logo is registered as a membership identification mark. The Association p

37、rescribes acceptable use of the logo andexpressly forbids the use of it to represent anything other than possession of membership. Possession of membership and use of thelogo in no way constitutes or reflects SMACNA approval of any product, method, or component. Furthermore, compliance of anysuch it

38、em with standards published or recognized by SMACNA is not indicated by presence of the logo.TABLE OF CONTENTSTABLE OF CONTENTSviiIAQ Guidelines for Occupied Buildings Under Construction Second EditionFOREWORD iii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TASK FORCE iv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NOTICE TO USERS v . . . . . . . . . . . . . . . . . . . . . . . . .

40、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TABLE OF CONTENTS vii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CHAPTER 1 INTRODUCTION Page1.1 OVERVIEW 1.1 . . .

41、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 HOW TO USE THIS MANUAL 1.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CHAPTER 2 AIR POLLUTANTS ASSOCIATED WITH CONSTRUCTION2.1 S

42、OURCES OF AIRBORNE CONTAMINANTS 2.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 HOW CONTAMINANTS MOVE THROUGH BUILDINGS 2.3 . . . . . . . . . . . . . . . . . . . . . . . 2.3 HOW AIRBORNE CONTAMINANTS IMPACT BUILDING OCCUPANTS 2.5 . . . . . . . . . 2.4 PLACING CONTAMINANT EXPO

43、SURES IN PERSPECTIVE 2.6 . . . . . . . . . . . . . . . . . . . 2.5 HAZARD ASSESSMENT 2.7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CHAPTER 3 CONTROL MEASURES3.1 OVERVIEW 3.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44、. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 HVAC PROTECTION 3.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 SOURCE CONTROL 3.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

45、 . . . . . . . . . 3.4 PATHWAY INTERRUPTION 3.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 HOUSEKEEPING 3.3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 SCHEDULING 3.4 .

46、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7 OCCUPANT RELOCATION 3.4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CHAPTER 4 HVAC4.1 HVAC: A CRITICAL FACTOR IN CONSTRUCTION C

47、ONTROL 4.1 . . . . . . . . . . . . . . . . 4.2 HVAC PROTECTION 4.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 HVAC SCHEDULING 4.3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48、 . . . 4.4 EQUIPMENT CLEANING 4.3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 ESTABLISHING PRESSURIZATION 4.3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CHAPTER 5 MANAGING THE CONSTRCTION PROCESS 5.1 PRO

49、JECT ORGANIZATION 5.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 SELECTING IAQ CONTROLS 5.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CHAPTER 6 PRERENOVATION BUILDING EVALUATION 6.1 OBJECTIVES 6.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2 PROCEDURES 6.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .