ANSI IEEE 4-2013 High-Voltage Testing Techniques.pdf

1、 IEEE Standard for High-Voltage Testing Techniques Sponsored by the Power System Instrumentation and Measurements Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 10 May 2013 IEEE Power and Energy Society IEEE Std 4-2013 (Revision of IEEE Std 4-1995) IEEE Std 4-2013 (Revision of IEEE Std 4-1

2、995) IEEE Standard for High-Voltage Testing Techniques Sponsor Power System Instrumentation and Measurements Committee of the IEEE Power and Energy Society Approved 6 March 2013 IEEE-SA Standards Board Recognized as an American National StandardAbstract: Standard methods and basic techniques for hig

3、h-voltage testing applicable to all types of apparatus for alternating voltages, direct voltages, lightning impulse voltages, switching impulse voltages, and impulse currents are established in this standard. Sections that deal with alternating voltage, direct voltage, and impulse testing are combin

4、ed in this revision to organize the technical content for ease of use. In addition, the concept of measurement uncertainty in evaluation of high-voltage and high-current tests is introduced in this version. Keywords: atmospheric corrections, high-current testing, high-voltage measurements, high-volt

5、age testing, IEEE 4TM, impulse currents, impulse voltages, testing The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2013 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 10 May 2013. Printed

6、 in the United States of America. IEEE is a registered trademark in the U.S. Patent +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Notice to users Laws and regulations Users of IE

7、EE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regu

8、latory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety of both pu

9、blic and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making this document available for use and adoption by public authorities and private users, the IEEE

10、does not waive any rights in copyright to this document. Updating of IEEE documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda,

11、 or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of

12、 amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/standards.ieee.org/index.html or contact the IEEE at the address listed previously. For more information about the IEEE Standards Association or the IEEE standards development process, visit IEEE-SA Website at http:/standards.iee

13、e.org/index.html. Errata Errata, if any, for this and all other standards can be accessed at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of t

14、his standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance

15、 via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under re

16、asonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Copyright 2013 IEEE. All rights reserved. ivCopyright 2013 IEEE. All rights reserved. vEssential Patent Claims may exist for which a Letter of

17、Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with

18、submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. F

19、urther information may be obtained from the IEEE Standards Association. Participants At the time this IEEE standard was completed, the High Voltage Test Techniques Working Group had the following membership: William Larzelere, Chair Frank Blalock Jeffrey A. Britton Larry Coffeen Ross Daharsh Frank D

20、eCesaro Dana Dufield Jari Hallstrom Jeffrey G. Hildreth Harold Kirkham Jack Kise John Kuffel William Larzelere Yi Li Kevin P. Loving James McBride Terry McComb Nigel P. McQuin Arthur Molden Randy Newnam Johannes Rickmann Juris Rungis Daniel Schweickart Stephen A. Sebo Mel Smith Eddy So May Wang Yixi

21、n Zhang The following members of the Standards Association balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. William Ackerman Michael Adams S. Aggarwal Roy Alexander Saleman Alibhay Stephen Antosz Anthony Baker Peter Balma Paul Barnhart Ea

22、rle Bascom III Thomas Basso Martin Baur Barry Beaster W.J. (Bill) Bergman Steven Bezner Wallace Binder Thomas Bishop Thomas Blackburn Frank Blalock Anne Bosma Kenneth Bow Harvey Bowles Jeffrey A. Britton Chris Brooks Gustavo Brunello Ted Burse Carl Bush William Bush Mark Bushnell William Byrd Paul C

23、ardinal Michael Champagne Arvind K. Chaudhary Weijen Chen Robert Christman Larry Coffeen Michael Comber John Crouse Matthew Davis Frank DeCesaro Larry Dix Dieter Dohnal Carlo Donati Gary Donner Randall Dotson Louis Doucet Dana Dufield Denis Dufournet James Dymond Douglas Edwards Kenneth Edwards Fred

24、 Elliott Gary Engmann C. Erven Leslie Falkingham Jorge Fernandez Daher Keith Flowers Joseph Foldi Marcel Fortin Rostyslaw Fostiak Fredric Friend Paul Gaberson Robert Ganser George Gela Saurabh Ghosh David Giegel David Gilmer Douglas Giraud Mietek Glinkowski Waymon Goch Jalal Gohari Edwin Goodwin Jam

25、es Graham William Griesacker J. Travis Griffith Randall Groves Bal Gupta Ajit Gwal Said Hachichi Charles Hand Richard Harp David Harris Jeffrey Hartenberger Wolfgan Haverkamp Jeffrey Helzer Steven Hensley Lee Herron Scott Hietpas Lauri Hiivala Raymond Hill Werner Hoelzl David Horvath John Houdek A.

26、Jones Andrew Jones Harry Josten Gael Kennedy Sheldon Kennedy Vladimir Khalin Yuri Khersonsky Gary King Harold Kirkham Jack Kise J. Koepfinger Boris Kogan Neil Kranich Jim Kulchisky Saumen Kundu John Lackey Donald Laird Chung-Yiu Lam William Larzelere Michael Lauxman Aleksandr Levin Paul Lindemulder

27、Gerald Liskom Hua Liu Copyright 2013 IEEE. All rights reserved. viAlbert Livshitz William Lockley Larry Lowdermilk Greg Luri Arturo Maldonado Richard Marek J. Dennis Marlow Lee Matthews Michael Maytum Omar Mazzoni James McBride William McBride Thomas McCarthy Terry McComb William McCown William McDe

28、rmid Nigel P. McQuin Joseph Melanson James Michalec Michael Miller Arthur Molden Georges Montillet Jerry Murphy R. Murphy Ryan Musgrove K.R.M. Nair Dennis Neitzel Arthur Neubauer Michael S. Newman Joe Nims T. Olsen Carl Orde Lorraine Padden Mirko Palazzo Donald Parker Bansi Patel David Peelo Brian P

29、enny Christopher Petrola Donald Platts Alvaro Portillo Bertrand Poulin Lewis Powell Ulf Radbrandt Reynaldo Ramos Johannes Rickmann Pierre Riffon Michael Roberts Stephen Rodick John Rossetti Marnie Roussell Thomas Rozek Dinesh Sankarakurup Daniel Sauer Bartien Sayogo Gil Shultz Hyeong Sim Douglas Smi

30、th James Smith Jerry Smith Steve Snyder Eddy So John Spare Nagu Srinivas David Stankes Gary Stoedter David Stone James Swank David Tepen Malcolm Thaden Peter Tirinzoni John Toth Remi Tremblay Eric Udren John Vergis Jane Verner Martin Von Herrmann Mark Walton Barry Ward Daniel Ward Joe Watson Peter W

31、erelius Steven Whalen Kenneth White Ernesto Jorge Wiedenbrug Matthew Wilkowski Larry Yonce Jian Yu Dawn Zhao Tiebin Zhao Hugh Zhu Xi Zhu J. Zimnoch When the IEEE-SA Standards Board approved this standard on 6 March 2013, it had the following membership: John Kulick, Chair David J. Law, Vice Chair Ri

32、chard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Peter Balma Farooq Bari Ted Burse Wael William Diab Stephen Dukes Jean-Philippe Faure Alexander Gelman Mark Halpin Gary Hoffman Paul Houz Jim Hughes Michael Janezic Joseph L. Koepfinger* Oleg Logvinov Ron Petersen Gary

33、 Robinson Jon Walter Rosdahl Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Yu Yuan *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Patrick Gibbons IEEE Standards Progr

34、am Manager, Document Development Malia Zaman IEEE Standards Program Manager, Technical Program DevelopmentCopyright 2013 IEEE. All rights reserved. viiIntroduction This introduction is not part of IEEE Std 4-2013, IEEE Standard for High-Voltage Testing Techniques. The current revision of this standa

35、rd is the eighth edition of this document as a separate standard. The subject had been addressed in the earliest standardization report of the American Institute of Electrical Engineers (AIEE) in 1889 and had been substantially elaborated upon in the subsequent reports issued from 1902 to 1933. When

36、 it was decided, in 1922, to reorganize the AIEEs standards into separate sections, the measurement of test voltages became one of the first subjects to be designated for a separate publication. The first edition was published in 1928. This standard establishes standard methods and basic techniques

37、for high-voltage testing. The standard is applicable to all types of apparatus for alternating voltages, direct voltages, lightning impulse voltages, switching impulse voltages, and impulse currents. The following standards have been used to prepare this document: IEC 60052, Recommendations for volt

38、age measurement by means of standard air gaps. IEC 60060-1, High-voltage test techniquesPart 1: General definitions and test requirements. IEC 60060-2, High-voltage test techniquesPart 2: Measuring systems. IEC 60060-3, High-voltage test techniquesPart 3: Definitions and requirements for on-site tes

39、ting. IEC 60270, Partial discharge measurements. IEC 60507, Artificial pollution tests on high-voltage insulators to be used on a.c. systems. IEC 61083-1, Instruments and software used for measurement in high-voltage impulse testsPart 1: Requirements for instruments. IEC 61083-2, Digital recorders f

40、or measurements in high-voltage impulse testsPart 2: Evaluation of software used for the determination of parameters of impulse waveforms. IEC 61245, Artificial pollution tests on high-voltage insulators to be used on d.c. systems. IEC 62475, High-current test techniques: Definitions and requirement

41、s for test currents and measuring systems. ISO/IEC Guide 98-3, Uncertainty of measurementPart 3: Guide to the expression of uncertainty in measurements (GUM). For ease of use, this revision organizes the technical content in such a way as to combine sections that deal with alternating voltage, direc

42、t voltage, and impulse voltage testing. In addition, this version introduces the concept of measurement uncertainty in evaluation of high-voltage and high-current tests. Copyright 2013 IEEE. All rights reserved. viiiContents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 2 1.3 Application 2 2. Normative re

43、ferences 2 3. Definitions 2 4. Safety Awareness . 6 5. General requirements for high-voltage tests and measurements 6 5.1 Normal environmental conditions . 6 5.2 Arrangement of the test object. 6 5.3 Grounding requirements for high-voltage tests . 8 5.4 Use of properly dimensioned interconnections a

44、nd electrodes 8 5.5 Susceptibility to noise: instrumentation shielding . 9 5.6 Classification of measuring systems 10 5.7 Procedures for qualification and use of measuring systems 12 6. Tests and measurements with alternating voltage 20 6.1 Terms used to characterize alternating voltage tests and me

45、asurements . 20 6.2 Source requirements 21 6.3 Measuring system requirements for approved measuring systems 23 6.4 Test procedures 24 6.5 Type tests, acceptance tests, performance tests, and performance checks for alternating voltage measuring systems. 31 6.6 Additional information on alternating vo

46、ltage test and measurement techniques . 33 7. Tests and measurements with direct voltage 36 7.1 Terms used to characterize direct voltage tests and measurements . 36 7.2 Source requirements 36 7.3 Measuring system requirements for approved measuring systems 37 7.4 Test procedures 38 7.5 Type tests,

47、acceptance tests, performance tests, and performance checks for direct voltage measuring systems 39 7.6 Additional information on direct voltage test and measurement techniques . 42 8. Tests and measurements with impulse voltage. 45 8.1 Terms used to characterize impulse voltage tests and measuremen

48、ts 45 8.2 Source requirements 50 8.3 Measuring system requirements for approved measuring systems 52 8.4 Test procedures 55 8.5 Type tests, acceptance tests, performance tests, and performance checks for impulse voltage measuring systems. 57 8.6 Additional information on impulse voltage test and mea

49、surement techniques 60 8.7 Reference voltage divider 63 9. Test and measurements with impulse current. 67 9.1 Terms used to characterize impulse currents. 67 9.2 Source requirements 69 Copyright 2013 IEEE. All rights reserved. ix9.3 Measuring system requirements for approved measuring systems 70 9.4 Test Procedures 71 9.5 Type tests, acceptance tests, performance tests, and performance checks for impulse current measuring systems. 71 9.6 Additional information on impulse current measurement techniques . 74 10. Combined voltage and composite voltage tests 79 10.