ANSI IEEE 583-1982 Standard Modular Instrumentation and Digital Interface System (CAMAC)《模数化测量仪表和数字式接口系统(CAMAC)》.pdf

1、Recognized as anAmerican National Standard (ANSI)Copyright 1982 byThe Institute of Electrical and Electronics Engineers, Inc. 345 E. 47th Street, New York, NY 10017No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the priorwritten perm

2、ission of the publisher.IEEE Std 583-1982(R2006)(Revision of IEEE 583-1975)IEEE Standard Modular Instrumentation and Digital Interface System (CAMAC1)Sponsor Instrumentation and Detectors Committeeof theIEEE Nuclear and Plasma Sciences SocietyReaffirmed March 30, 2006Approved September 17, 1981IEEE-

3、SA Standards BoardReaffirmed January 13, 2000Approved December 15, 1981American National Standards Institute1Computer Automated Measurement and ControlIEEE Standards documents are developed within the Technical Committees of the IEEE Societies and the StandardsCoordinating Committees of the IEEE Sta

4、ndards Board. Members of the committees serve voluntarily and withoutcompensation. They are not necessarily members of the Institute. The standards developed within IEEE represent aconsensus of the broad expertise on the subject within the Institute as well as those activities outside of IEEE whichh

5、ave expressed an interest in participating in the development of the standard.Use of an IEEE Standard is wholly voluntary. The existence of an IEEE Standard does not imply that there are no otherways to produce, test, measure, purchase, market, or provide other goods and services related to the scop

6、e of the IEEEStandard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to changebrought about through developments in the state of the art and comments received from users of the standard. EveryIEEE Standard is subjected to review at least once every ve

7、years for revision or reafrmation. When a document ismore than ve years old, and has not been reafrmed, it is reasonable to conclude that its contents, although still ofsome value, do not wholly reect the present state of the art. Users are cautioned to check to determine that they havethe latest ed

8、ition of any IEEE Standard.Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership afliationwith IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together withappropriate supporting comments.Interpretations

9、: Occasionally questions may arise regarding the meaning of portions of standards as they relate tospecic applications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiateaction to prepare appropriate responses. Since IEEE Standards represent a consensu

10、s of all concerned interests, it isimportant to ensure that any interpretation has also received the concurrence of a balance of interests. For this reasonIEEE and the members of its technical committees are not able to provide an instant response to interpretation requestsexcept in those cases wher

11、e the matter has previously received formal consideration.Comments on standards and requests for interpretations should be addressed to:Secretary, IEEE Standards Board345 East 47th StreetNew York, NY 10017USAiiiForewordThis Forward is not a part of ANSI/IEEE Std 5831982, IEEE Standard Modular Instru

12、mentation and Digital Interface System(CAMAC).The interface system on which this standard is based was developed by the ESONE Committee of EuropeanLaboratories* with the collaboration of the NIM Committee of the US Department of Energy (DOE).* This standardis based on ERDA2Reports TID-25875, July 19

13、72 (corresponding to ESONE Report EUR 4100e) and TID-25877.The mandatory features and dimensions in this document are identical (see note) to those in the reports mentionedabove and in Publications 482 and 516 of the International Electrotechnical Commission (IEC).This standard was reviewed and ball

14、oted by the Nuclear Instruments and Detectors Committee of the IEEE Nuclearand Plasma Sciences Society. Because of the broad applicability of this instrumentation and interface system,coordination was established with numerous IEEE Societies, Groups, and Committees, including the CommunicationsSocie

15、ty, Control Systems Society, Industry Applications Society, Industrial Electronics and Control InstrumentationGroup, Instrumentation and Measurement Group, and the Power Generation and Nuclear Power EngineeringCommittees of the Power Engineering Society. This review and coordination resulted in valu

16、able suggestions that havebeen incorporated into the standard.The revision of this standard was in conjunction with the 1981 review (1982 issue) of the entire family of IEEECAMAC standards undertaken to incorporate existing addenda and corrections into the standards.At the time of approval of this s

17、tandard, the membership of the Nuclear Instruments and Detectors Committee of theIEEE Nuclear and Plasma Sciences Society was as follows:D. C. Cook, Chair Louis Costrell, Secretary J. A. ColemanJ. F. DetkoF. S. GouldingF. A. KirstenT. R. KohlerH. W. KranerW. W. ManaganG. L. MillerD. E. PersykP. L. P

18、helpsJ. H. TrainorF. J. WalterS. WagnerAt the time it approved this standard, the American National Standards Committee on Nuclear Instruments, N42, hadthe following representatives:Louis Costrell, Chair D. C. Cook, Secretary American Conference of Governmental Industrial HygienistsJesse LiebermanAm

19、erican Nuclear Society . Frank W. ManningHealth Physics Society. J. B. Horner KuperJ. M. Selby (Alt)Institute of Electrical and Electronics Engineers .Louis CostrellJulian Forster (Alt)David C. Cook (Alt)A. J. Spurgin (Alt)Instrument Society of America M. T. SlindJ. E. Kaveckis (Alt)Lawrence Berkele

20、y National Laboratory .Lee J. WagnerOak Ridge National Laboratory. Frank W. Manning2Department of Energy Research and Development Administration (now part of US Department of Energy).ivD. J. Knowles (Alt)US Department of the Army, Materiel Command .Abraham E. CohenUS Department of Commerce, National

21、 Bureau of Standards Louis CostrellUS Department of Energy. Gerald GoldsteinUS Federal Emergency Management Agency . Carl R. Siebentritt, JrUS Nuclear Regulatory Commission.Robert E. AlexanderUS Naval Research Laboratory David C. CookMembers-at-Large.J. G. BellianO. W. Bilharz, JrJohn M. Gallagher,

22、JrVoss A. MooreR. F. SheaE. J. Villario*NIM Committee3L. Costrell, Chair C. AkerlofE. J. BarsottiB. BertolucciJ. A. BiggerstaffA. E. BrennerR. M. BrownE. DaveyW. K. DawsonS. R. DeissS. DhawanR. DowningT. F. DroegeC. D. EthridgeC. E. L. GingellA. GjovigB. GobbiD. B. GustavsonD. R. HeywoodN. W. HillD.

23、 HorelickM. E. JohnsonC. KernsF. A. KirstenP. F. KunzR. S. LarsenA. E. Larsh, JrR. A. LaSalleN. LatnerF. R. LenkszusR. LeongC. LoggS. C. LokenD. R. MachenD. A. MackJ. L. McAlpineL. B. MortaraV. C. NegroL. PaffrathD. G. PerryI. PizerE. PlatnerS. RankowitzS. J. RudnickG. K. SchulzeW. P. SimsD. E. Stil

24、wellJ. H. TrainorK. J. TurnerH. VerweijB. F. WadsworthL. J. WagnerH. V. WalzD. H. WhiteNIM Executive Committee for CAMACL. Costrell, Chair E. J. BarsottiJ. A. BiggerstaffS. DhawanF. A. KirstenR. S. LarsenD. A. MackJ. H. TrainorNIM Dataway Working GroupF. A. Kirsten, Chair E. J. BarsottiJ. A. Biggers

25、taffL. CostrellS. DhawanA. GjovigD. R. HeywoodD. HorelickC. KernsP. F. KunzR. S. LarsenD. R. MachenL. PaffrathS. RankowitzS. J. Rudnick3National Instrumentation Methods Committee of the US Department of Energy.vNIM Software Working GroupD. B. Gustavson, Jr, Chair W. K. Dawson, Secretary A. E. Brenne

26、rR. M. BrownS. R. DeissS. DhawanC. D. EthridgeM. E. JohnsonP. A. LaSalleF. B. LenkszusC. A. LoggJ. McAlpineL. B. MortaraD. G.PerryNIM Mechanical and Power Supplies Working GroupL. J. Wagner, Chair L. Costrell C. KernsS. J. RudnickW. P. SimsNIM Analog Signals Working GroupD. I. Porat, Chair L. Costre

27、ll C. E. L. GingellN. W. HillS. RankowitzNIM Serial System SubgroupD. R. Machen, Chair E. J. BarsottiD. HorelickF. A. KirstenR. G. MartinL. PaffrathS. J. RudnickNIM Block Transfer SubgroupE. J. Barsotti, Chair W. K. DawsonF. A. KirstenR. A. LaSalleF. R. LenkszusR. G. MartinR. F. Thomas, JrNIM Multip

28、le Controllers SubgroupP. F. Kunz, Chair E. J. Barsotti F. A. KirstenD. R. MachenR. G. Martin*ESONE Committee4W. Attwenger, Austria, Chair, 198081H. Meyer, Belgium, Secretary Representatives of ESONE Member LaboratoriesW. Attwenger, AustriaR. Biancastelli, ItalyL. Binard, BelgiumJ. Biri, HungaryB. B

29、jarland, FinlandD. A. Boyce, EnglandB. A. Brandt, F. R. GermanyF. Cesaroni, ItalyP. Christensen, Denmark4European Standards on Nuclear Electronics Committee.viW. K. Dawson, CanadaM. DeMarsico, ItalyC. A. DeVries, NetherlandsH. Dilcher, F. R. GermanyB. V. Fefilov, USSRR. A. Hunt, EnglandW. Kessel, F.

30、 R. GermanyR. Klesse, FranceE. Kwakkel, NetherlandsJ. L. Lecomte, FranceJ. Lingertat, D. R. GermanyM. Lombardi, ItalyM. Maccioni, ItalyP. Maranesi, ItalyC. H. Mantakas, GreeceD. Marino, ItalyH. Meyer, BelgiumK. D. Muller, F. R. GermanyJ. G. Ottes, F. R. GermanyA. D. Overtoom, NetherlandsE. C. G. Owe

31、n, EnglandL. Panaccione, ItalyM. Patrutescu, RoumaniaR. Patzelt, AustriaA. C. Peatfield, EnglandI. C. Pyle, EnglandB. Rispoli, ItalyM. Sarquiz, FranceW. Schoeps, SwitzerlandR. Schule, F. R. GermanyP. G. Sjolin, SwedenL. Stanchi, ItalyR. Trechcinski, PolandM. Truong, FranceP. Uuspaa, FinlandH. Verwei

32、j, SwitzerlandA. J. Vickers, EnglandS. Vitale, ItalyM. Vojinovic, YugoslaviaK. Zander, F. R. GermanyD. Zimmermann, F. R. GermanyENSONE Executive Group (XG)W. Attwenger, Austria, XG, (Chairman 198081)H. Meyer, Belgium, Secretary P. Christensen, DenmarkM. Dilcher, F. R. GermanyB. Rispoli, ItalyM. Sarq

33、uiz, FranceR. Trechcinski, PolandA. Vickers, EnglandH. Verweij, SwitzerlandESONE Technical Coordination Committee (TCC)A. C. Peatfield, England, (TCC Chairman)P. Christensen, Denmark, (TCC Secretary)W. Attwenger, AustriaR. Biancastelli, ItalyG. Bianchi, FranceH. Dilcher, F. R. GermanyP. Gallice, Fra

34、nceW. Kessel, F. R. GermanyJ. Lukacs, HungaryR. Patzelt, AustriaP. J. Ponting, SwitzerlandW. Schoeps, SwitzerlandS. Vitale, ItalyECA/ESONE CAMAC Document Maintenance Study Group (DMSG)P. Gallice, France, Chair R. C. M. Barnes, EnglandL. Besse, SwitzerlandJ. Davis, EnglandF. Iselin, SwitzerlandH. Mey

35、er, BelgiumH. J. Trebst, F. R. GermanyWhen this standard was approved on September 17, 1981, by the IEEE Standards Board it had the followingmembership:I. N. Howell, Jr, Chair Irving Kolodny, Vice Chair Sava I. Sherr, Secretary G. Y. R. AllenJ. J. ArchambaultJ. H. BeallJ. T. BoettgerEdward ChelottiE

36、dward J. CohenLen S. CoreyJay ForsterKurt GreeneLoering M. JohnsonJoseph L. KoepfingerJ. E. MayDonald T. Michael*J. P. RiganatiF. RosaR. W. SeelbachJ. S. StewartW. E. VannahVirginius N. Vaughan, JrArt WallRobert E. Weiler*Member emeritusNOTE Figures prexed by the letter K are supplementary illustrat

37、ions.viiNOTE Availability of DocumentsANSI Sales Department, American National Standards Institute, 1430 Broadway, New York, NY10018.IEEE IEEE Service Center, 445 Hoes Lane, Piscataway New Jersey 08854, USA.IEC International Electrotechnical Commission, 1, rule de Varemb, CH-1211 Geneva 20,Switzerla

38、nd.DOE and TID Reports National Bureau of Standards, Washington, D.C. 20234, USA, Attn: L. Costrell.EURATOM Ofce of Ofcial Publications of the European Communitities, P.O. Box 1003, Luxembourg.ESONE Commission of the European Communities, CGR-BCMN, B-2440 GEEL, Belgium, Attn:ESONE Secretariat, H. Me

39、yer.CAMAC and NIM Standards and ReportsTitle IEEE, ANSI Std No IEC No DOE NoEURATOM(EUR) or ESONE NoCAMAC Instrumentation and Interface Standards*SH08482*(Library of Congress No 8185060) Modular Instrumentation and Digital Interface System (CAMAC)ANSI/IEEE Std 583-1982 516 TID-25875and TID-25877EUR

40、4100eSerial Highway Interface System (CAMAC)ANSI/IEEE Std 595-1982 640 TID-26488EUR 6100eParallel Highway Interface System (CAMAC)ANSI/IEEE Std 596-1982 552 TID-25876and TID-25877EUR 4600eMultiple Controllers in a CAMAC CrateANSI/IEEE Std 675-1982 729 DOE/EV-0007 EUR 6500eBlock Transfers in CAMAC Sy

41、stems ANSI/IEEE Std 683-1976 (Reaff 1981)677 TID-26616EUR 4100 supplAmplitude Analog Signals within a 50 WSystem TID-26614 EUR 5100eThe Definition of IML A Language for Use in CAMAC Systems TID-26615 ESONE/IML/01CAMAC Tutorial Articles TID-26618 Real-Time BASIC for CAMAC ANSI/IEEE Std 726-1982 TID-2

42、6619ESONE/RTB/03Subroutines for CAMAC ANSI/IEEE Std 758-1979 (Reaff 1981)713 DOE/EV-0016ESONE/SR/01Recommendations for CAMAC Serial Highway Drivers and LAM Graders for the SCC-L2 DOE/EV-0006 ESONE/SD/02Definitions of CAMAC Terms Included in SH08482 678 DOE/ER-0104 ESONE/GEN/01Standard Nuclear Instru

43、ment Modules NIM 547TID-20893(Rev 4)*This is a hard cover book that contains ANSI/IEEE Std 583-1982, ANSI/IEEE Std 595-1982, ANSI/IEEE Std 596-1982, ANSI/IEEE Std 675-1982, ANSI/IEEE Std 683-1976 (Reaff 1981), ANSI/IEEE Std 726-1982 and IEEE Std 758-1979 (Reaff 1981), plus introductory material and

44、aglossary of CAMAC terms.Superseded by corresponding IEEE Standard listed.In preparation.Covers only mechanical features and connector pin assignments.viiiCLAUSE PAGE1. Introduction.12. Interpretation.13. Basic Features .24. Mechanical Characteristics .34.1 The Crate 44.2 Plug-In Units 64.3 Adaptor

45、for NIM Units 94.4 The Dataway 95. Use of the Dataway Lines .145.1 Commands . 155.2 Strobe Signals S1 and S2 175.3 Data 175.4 Status Information 185.5 Common Controls Z, C, I.285.6 Nonstandard Connections P1P7. . 295.7 Power Lines 306. Dataway Commands .306.1 Read Commands: Function Codes F(0)-F(7).

46、 . 306.2 Control Commands: Function Codes F(8)-F(15). . 316.3 Write Commands: Function Codes F(16)-F(23). 326.4 Control Commands: Function Codes F(24)-F(31). 346.5 External Representation of the Command . 357. Signal Standards357.1 Digital Signals on the Dataway 367.2 Other Digital Signals 427.3 Ana

47、log Signals . 428. Power Line Standards .439. Forced Air Ventilation (Supplementary Information) 4410. Use of Supplementary 6 V Power (Bus Lines Y1, Y2) 45Annex A Definitions of Module and Controller (Informative).60Annex B Digital Signal Classes and Standard Markings for Coaxial Connectors (Supplem

48、entary Information) (Informative)61Annex C Preferred Connectors and Contact Assignments (Informative).62Annex D Typical Crate Mounted Power Supply and Ventilation Unit With Crate/Power Supply Interface Housing (Informative)71Annex E Camac Categories (Informative)81Annex F Bibliography (Informative)

49、82Copyright 1982 IEEE All Rights Reserved1An American National StandardIEEE Standard Modular Instrumentation and Digital Interface System (CAMAC)1. IntroductionThis standard is intended to serve as a basis for a range of modular instrumentation capable of interfacing transducersand other devices to digital controllers for data and control. It consists of mechanical standards and signal standardsthat are sufcient to ensure physical and operational compatibility between units regardless of source.The standard fully species