ANSI IEEE 802.16.2-2004 Recommended Practice for Local and Metropolitan Area Networks Coexistence of Fixed Broadband Wireless Access Systems (IEEE Computer Society)《局域网和城域网推荐实施规程.固.pdf

1、IEEE Std 802.16.2-2004(Revision of IEEE Std 802.16.2-2001)802.16.2IEEE Recommended Practice for Local and metropolitan area networks Coexistence of Fixed BroadbandWirels Aces SystemsPublished by The Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY10016-5997, USA17 M

2、arch 2004IEEE Computer Societyand theIEEE Microwave Theory and Techniques SocietySponsored by theLAN/MAN Standards CommitteePrint: SH95215PDF: SS95215Recognized as anAmerican National Standard (ANSI)IEEE Std 802.16.2-2004(R2010)(Revision of IEEE Std 802.16.2-2001)IEEE Recommended Practice forLocal a

3、nd Metropolitan Area NetworksCoexistence of Fixed Broadband Wireless Access Systems SponsorsLAN/MAN Standards Committee of theIEEE Computer Societyand theIEEE Microwave Theory and Techniques SocietyApproved 12 May 2004American National Standards InstituteReaffirmed 25 March 2010Approved 9 February 2

4、004IEEE-SA Standards BoardThe Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2004 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 17 March 2004. Printed in the United States of America.IEEE, 802

5、, and WirelessMAN are registered trademarks in the U.S. Patent Point-to-point andPoint-to-Multipoint Systems; Spurious emissions and receiver immunity at equipment/antenna portof Digital Fixed Radio Systems.Abstract: This recommended practice provides recommendations for the design and coordinatedde

6、ployment of fixed broadband wireless access systems in order to control interference and facilitatecoexistence. It analyzes appropriate coexistence scenarios and provides guidance for system design,deployment, coordination, and frequency usage. It generally addresses licensed spectrum between2 GHz a

7、nd 66 GHz, with a detailed emphasis on 3.5 GHz, 10.5 GHz, and 23.5 43.5 GHz.Keywords: coexistence, fixed broadband wireless access (FBWA), interference, local multipointdistribution service (LMDS), millimeter waves, multichannel multipoint distribution service (MMDS),microwaves, multipoint (MP), poi

8、nt-to-multipoint (PMP), radio, wireless metropolitan area network(WirelessMAN) standardIEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of theIEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a cons

9、ensus develop-ment process, approved by the American National Standards Institute, which brings together volunteers representing variedviewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve with-out compensation. While the IEEE admini

10、sters the process and establishes rules to promote fairness in the consensus devel-opment process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information containedin its standards.Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for

11、any personal injury, property or other dam-age, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resultingfrom the publication, use of, or reliance upon this, or any other IEEE Standard document.The IEEE does not warrant or represent the acc

12、uracy or content of the material contained herein, and expressly disclaimsany express or implied warranty, including any implied warranty of merchantability or fitness for a specific purpose, or thatthe use of the material contained herein is free from patent infringement. IEEE Standards documents a

13、re supplied “AS IS.”The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market,or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at thetime a standard is approved and issu

14、ed is subject to change brought about through developments in the state of the art andcomments received from users of the standard. Every IEEE Standard is subjected to review at least every five years for revi-sion or reaffirmation. When a document is more than five years old and has not been reaffi

15、rmed, it is reasonable to concludethat its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to checkto determine that they have the latest edition of any IEEE Standard.In publishing and making this document available, the IEEE is not sug

16、gesting or rendering professional or other servicesfor, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed by any other person orentity to another. Any person utilizing this, and any other IEEE Standards document, should rely upon the advice of a com-petent p

17、rofessional in determining the exercise of reasonable care in any given circumstances.Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as they relate to specificapplications. When the need for interpretations is brought to the attention of IEEE, the In

18、stitute will initiate action to prepareappropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is important to ensure that anyinterpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of itssocieties and Sta

19、ndards Coordinating Committees are not able to provide an instant response to interpretation requestsexcept in those cases where the matter has previously received formal consideration. Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership affiliatio

20、n withIEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriatesupporting comments. Comments on standards and requests for interpretations should be addressed to:Secretary, IEEE-SA Standards Board445 Hoes LanePiscataway, NJ 08854USAAutho

21、rization to photocopy portions of any individual standard for internal or personal use is granted by the Institute ofElectrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. Toarrange for payment of licensing fee, please contact Copyright C

22、learance Center, Customer Service, 222 Rosewood Drive,Danvers, MA 01923 USA; (978) 750-8400. Permission to photocopy portions of any individual standard for educationalclassroom use can also be obtained through the Copyright Clearance Center.Note: Attention is called to the possibility that implemen

23、tation of this standard may require use of subject mat-ter covered by patent rights. By publication of this standard, no position is taken with respect to the existence orvalidity of any patent rights in connection therewith. The IEEE shall not be responsible for identifying patentsfor which a licen

24、se may be required by an IEEE standard or for conducting inquiries into the legal validity orscope of those patents that are brought to its attention.iv Copyright 2004 IEEE. All rights reserved.Introduction(This introduction is not a part of IEEE Std 802.16.2-2003, IEEE Recommended Practice for Loca

25、l andMetropolitan Area NetworksCoexistence of Fixed Broadband Wireless Access Systems.)This recommended practice revises IEEE Std 802.16.2-2001. The original document covered 1066 GHzfrequencies in general, with a focus on 23.543.5 GHz frequencies. The activity paralleled the project in theIEEE 802.

26、16 Working Group to develop IEEE Std 802.16-2001, which specified the WirelessMAN airinterface from 10 GHz to 66 GHz. As the Working Group expanded the scope of the WirelessMAN airinterface to include 211 GHz frequencies, in the project leading to the IEEE Std 802.16aamendment, theworking group took

27、 up the task of developing a parallel extension of its coexistence work to include 211GHz frequencies. This revision includes the results of that effort, along with additional material oncoexistence with point-to-point (PTP) systems.Notice to usersErrataErrata, if any, for this and all other standar

28、ds can be accessed at the following URL: http:/standards.ieee.org/reading/ieee/updates/errata/index.html. Users are encouraged to check this URL forerrata periodically.InterpretationsCurrent interpretations can be accessed at the following URL: http:/standards.ieee.org/reading/ieee/interp/index.html

29、.ParticipantsThis recommended practice was developed by the IEEE 802.16 Working Group on Broadband WirelessAccess, which is responsible for wireless metropolitan area network (WirelessMAN) standards. The IEEE802.16 Working Group had the following officers:Roger B. Marks, ChairKenneth Stanwood, Vice

30、ChairCarl Eklund, prior Vice Chair (until 25 July 2003)Dean Chang, SecretaryPrimary development was carried out by the working groups Task Group 2, which had the followingofficers:Philip Whitehead, Chair, SecretaryRoger B. Marks, Technical Editor, Final StagesNico J.M. van Waes, Reza Arefi, Technica

31、l Editors, Earlier DraftsCopyright 2004 IEEE. All rights reserved. vThis recommended practice is a revision of IEEE Std 802.16.2-2001. The following served in key capacitiesat the time that standard completed working group letter ballot:Roger B. Marks, Chair, IEEE 802.16 Working Group on Broadband W

32、ireless AccessBrian G. Kiernan, Vice Chair, IEEE 802.16 Working GroupCarl J. Bushue, Secretary, IEEE 802.16 Working GroupPhilip Whitehead, Chair, Task Group 2Roger B. Marks, Technical EditorMuya Wachira, Vito Scaringi, Rebecca Chan, Prior Technical EditorsRmi Chayer, Jack Garrison, Barry Lewis, Paul

33、 Thompson, Philip Whitehead, and Robert Whiting,Ballot Resolution CommitteeThe following members of the IEEE 802.16 Working Group on Broadband Wireless Access participated inthe Working Group Letter Ballot in which the draft of IEEE Std 802.16.2-2001 was approved:Song AnReza ArefiJori ArrakoskiArun

34、V. ArunachalamEli AviviIan BaragarC. R. BaughCarlos BelfioreAnader Benyamin-SeeyarTom BilottaBaruch BuskilaDean ChangNaftali ChayatRmi ChayerMary CondieJos CostaBruce CurrivanAmos DotanBrian EidsonCarl EklundDavid FalconerGeorge FishelAdrian FloreaRobert FosterAvraham FreedmanG. Jack GarrisonRichard

35、 GermonPhil GuillemetteZion HadadBaruch HalachmiMichael HamiltonSrinath HosurColeman HumWayne HunterEric JacobsenHamadi JamaliJacob JorgensenInchul KangMika KasslinBrian G. KiernanItzik KitroserAllan KleinJay KleinTom KolzeDemosthenes KostasJohn LangleyYigal LeibaBarry LewisJohn LiebetreuLars LindhF

36、red LucasScott MarinRoger B. MarksAndy McGregorRonald MeyerAndrew MiddletonAnton MonkWilliam MyersUzi PadanYunsang ParkBrian PetryMoshe RanStanley ReibleGuy ResheffDavid RibnerEugene RobinsonWalt RoehrDurga SatapathyGlen SaterVito ScaringiDavid SchaferMenashe ShaharChet ShiraliGeorge StamatelosKenne

37、th StanwoodPaul ThompsonDavid TrinkwonNico van WaesMuya WachiraPhilip WhiteheadChaoming ZengJuan-Carlos Zunigavi Copyright 2004 IEEE. All rights reserved.The following members of the IEEE 802.16 Working Group on Broadband Wireless Access participated inthe working group letter ballot in which the dr

38、aft of this recommended practice was approved. Balloters mayhave voted for approval, disapproval, or abstention.The following members of the IEEE balloting committee voted on this recommended practice. Ballotersmay have voted for approval, disapproval, or abstention.Aditya AgrawalGordon AntonelloRez

39、a ArefiJori ArrakoskiMalik AudehEli AviviAnader Benyamin-SeeyarCarl BushueBaruch BuskilaDean ChangYuankai ChangDavid ChaunceyNaftali ChayatRmi ChayerBrian EidsonHenry EiltsCarl EklundAvraham FreedmanAndrew GarrettG. Jack GarrisonMarianna GoldhammerZion HadadGrant HulseDavid HussonJacob JorgensenTal

40、KaitzMika KasslinPhil KellyOfer KelmanBrian G. KiernanItzik KitroserJerome KrinockJonathan LabsJohn LangleyYigal LeibaBarry LewisLars LindhHui-Ling LouHeinz LycklamaRoger B. MarksRussell McKownApurva ModyRonald MuriasRobert NelsonMike PaffKenneth PeirceSubbu PonnuswamyMoshe RanGene RobinsonShane Rog

41、ersVincentzio RomanAmir SarajediniOctavian SarcaDurga SatapathyRandall SchwartzYossi SegalJames SimkinsSean SonanderKenneth StanwoodPaul StruhsakerShawn TaylorJose TelladoDavid TrinkwonNico van WaesArthur WangRobert WardPhilip WhiteheadJohn AdamsEdward Carley JrRemi ChayerAik ChindapolKeith ChowTodo

42、r CooklevJose M. CostaThomas DineenDr. Sourav DuttaAvraham FreedmanErnesto GarciaTheodore GeorgantasAndrew GermanoJames GilbBrian G. KiernanPi-Cheng LawYeou-Song LeeJan-Ray LiaoChristina LimRandolph LittleGregory LuriRyan MadronRoger B. MarksIngolf MeierGeorge MiaoApurva ModyNarayanan MurugesanMicha

43、el NewmanPaul NikolichStephen PalmAshley PeacockSubbu PonnuswamyVikram PunjEugene RobinsonThomas SapianoJohn SaralloJohn SargentNeil ShippGil ShultzYoram SolomonKenneth StanwoodAdrian StephensCarl StevensonScott ValcourtNico van WaesJoan ViaplanaHung-yu WeiPatrick YuOren YuenCopyright 2004 IEEE. All

44、 rights reserved. viiWhen the IEEE-SA Standards Board approved this recommended practice on 09 February 2004, it had thefollowing membership:Don Wright, ChairTBD, Vice ChairJudith Gorman, Secretary*Member EmeritusAlso included are the following nonvoting IEEE-SA Standards Board liaisons:Satish K. Ag

45、garwal, NRC RepresentativeRichard DeBlasio, DOE RepresentativeAlan Cookson, NIST RepresentativeMichelle TurnerIEEE Standards Project EditorChuck Adams,Stephen BergerMark D. BowmanJoseph BruderBob DavisArnold M. GreenspanMark S. HalpinRaymond HapemanRichard J. HollemanRichard HulettLowell JohnsonHerm

46、ann KochThomas J. McGeanSteve M. MillsDaleep MohlaPaul NikolichT. W. OlsenRonald C. PetersenGary S. RobinsonFrank StoneMalcolm V. ThadenDoug ToppingJoe D. WatsonRoberto de BoissonJulian Forster*Joseph Koepfinger*viii Copyright 2004 IEEE. All rights reserved.CONTENTS1. Overview 11.1 Scope 21.2 Purpos

47、e. 22. Normative references. 23. Definitions and Abbreviations 33.1 Definitions . 33.2 Abbreviations. 64. System overview 74.1 System architecture 84.1.1 PMP systems 94.1.2 Mesh systems. 94.1.3 Antenna subsystems.94.2 Interference scenarios 104.2.1 Forms of interference. 104.2.2 Acceptable level of

48、interference 114.2.3 Interference paths. 114.2.3.1 Victim BS 114.2.3.2 Victim SS. 134.2.3.3 Victim omnidirectional mesh node 145. Coexistence of FBWA systems in 23.5 GHz 43.5 GHz . 155.1 Introduction 155.2 Recommendations 165.2.1 Recommendation 1-1. 165.2.2 Recommendation 1-2. 175.2.3 Recommendation

49、 1-3. 175.2.4 Recommendation 1-4. 175.2.5 Recommendation 1-5. 175.2.6 Recommendation 1-6. 185.2.7 Recommendation 1-7. 185.2.8 Recommendation 1-8. 185.2.9 Recommendation 1-9. 185.2.10 Recommendation 1-10. 195.3 Suggested guidelines for geographical and frequency spacing . 195.4 Medium overview 195.5 Equipment design parameters 205.5.1 Transmitter design parameters. 205.5.1.1 Maximum EIRP psd limits 205.5.1.1.1BS. 215.5.1.1.2SS. 225.5.1.1.3Repeaters (RSs) 225.5.1.1.4In-band intercell links 225.5.1.1.5Uplink power control . 225.5.1.1.6Downlink power control 235