ANSI IEEE 1682-2011 Standard for Qualifying Fiber Optic Cables Connections and Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating Stations《光缆 连接 光纤捻接审查试验使用.pdf

1、 IEEE Std 1682-2011 IEEE Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating Stations Sponsor Insulated Conductors Committee and Nuclear Power Engineering Committee of the IEEE Power and Energy Society Approved 10 S

2、eptember 2011 IEEE-SA Standards Board Approved 12 December 2012 American National Standards Institute Approved as a Full-Use Standard on 14 June 2013 IEEE-SA Standards Board Abstract: This standard provides general requirements, directions, and methods for qualifying fiber optic cables, connections,

3、 and optical fiber splices for use in safety systems of nuclear power generating stations, including fuel reprocessing stations and other related installations. Cables, optical fibers, and splices within or integral to other devices (e.g., sensors, instruments, panels, etc.) shall be qualified using

4、 the requirements in the applicable device standard or IEEE Std 323TM-2003, as appropriate. However, the requirements of this standard may be applied to the fiber optic cable and interfaces within these devices. Keywords: Class 1E, connectors, fiber, fiber optic cable, fibers, IEEE 1682TM, nuclear,

5、optical fiber, safety, splices The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2013 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 1 August 2013. Printed in the United States of America.

6、IEEE is a registered trademark in the U.S. Patent +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Copyright 2013 IEEE. All rights reserved. iv Notice to users Laws and regulations

7、Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the appl

8、icable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety

9、 of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making this document available for use and adoption by public authorities and private users

10、, the IEEE does not waive any rights in copyright to this document. Updating of IEEE documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments,

11、corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the

12、issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/standards.ieee.org/index.html or contact the IEEE at the address listed previously. For more information about the IEEE Standards Association or the IEEE standards development process, visit IEEE-SA Website at http:/st

13、andards.ieee.org/index.html. Errata Errata, if any, for this and all other standards can be accessed at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implemen

14、tation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement o

15、f assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation

16、or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Copyright 2013 IEEE. All rights reserved. v Essential Patent Claims may exist for which a Letter of Assurance has not been received.

17、 The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assura

18、nce, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtain

19、ed from the IEEE Standards Association. Copyright 2013 IEEE. All rights reserved. vi Participants The Nuclear Power Engineering Committee (NPEC) that recommended approval of this standard had the following membership: John D. MacDonald, Chair Satish Aggarwal, Vice Chair George Ballassi, Secretary Ij

20、az Ahmad George Attarian Farouk D. Baxter Mark Bowman Daniel F. Brosnan Nissen M. Burstein Robert C. Carruth John P. Carter John Disosway Dennis Dellinger Stephen Fleger Robert J. Fletcher Robert B. Fuld James Gleason Dale T. Goodney Daryl Harmon Dirk C. Hopp David A. Horvath Paul R. Johnson Thomas

21、Koshy Harvey C. Leake J. Scott Malcolm Alexander Marion Michael H. Miller James Parello Mansoor H. Sanwarwalla Glen E. Schinzel James E. Stoner, Jr. James E. Thomas Marek Tengler Paul L. Yanosy, Sr. David J. Zaprazny Subcommittee 2 of the Nuclear Power Engineering Committee that recommended approval

22、 of this standard had the following membership: James Gleason, Chair John White, Vice Chair Thomas Koshy, Secretary Chris Abernathy Saleem Akhtar Steve D. Benson Tom Brewington Nissen M. Burstein Steve Casadevall Suresh Channarasappa Jake Chilek Jonathan Cornelius James Dean Dennis Dellinger Phil Di

23、Benedetto Yikang Dou Mike Dougherty Frank Drumm Walter Emerson Wells Fargo Sean Foley Robert Francis Patrick Gove William Hadovski Jang Hong-Seok Dirk-Christian Hopp David Horvath Kenneth Kettle Robert Konnik Kofi Korsah Serena Krause Bruce Lory Tania Marinez-Navedo Matthew McConnell Daniel Mikow As

24、if Mohiuddin Charles Mohr Ed Mohtashemi Bill Newell James Parello Janez Pavsek Chris Pegge Jan Pirrong Robert Queenan Sheila Ray Fred Roy Steve Sandberg Glen Schinzel Kjell Spng Rebecca Steinman Marek Tengler Ying Wang Carl Weber John Wheless John White Richard Wood Copyright 2013 IEEE. All rights r

25、eserved. vii At the time this IEEE standard was completed, the Fiber Optic Qualification Working Group had the following membership: Jan Pirrong, Chair Sean Foley, Vice Chair Kofi Korsah, Secretary William Bloethe Michael Burke Craig Calvert James Dean Allen Denyer Jeffrey Dominique Steven Graham Ke

26、nneth Kettle Gerry Liskom Randy Jetter Robert Konnik John Merando Asif Mohiuddin Chris Pegge Jonathan Pirrong Marco Van Uffelen Jack Rosko Jack Zhao The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention.

27、William J. Ackerman Satish Aggarwal George Ballassi Robert Beavers William Bloethe Kenneth Bow Tom Brewington Daniel F. Brosnan Kent Brown Nissen M. Burstein William Byrd Robert C. Carruth Suresh Channarasappa Garry Chapman James Dean Dennis Dellinger John Disosway Gary Donner Michael Dougherty Gary

28、 Engmann Wells Fargo Stephen Fleger Sean Foley James Gleason Steven Graham Ron Greenthaler Randall Groves Ajit Gwal Daryl Harmon Werner Hoelzl David Horvath Randy Jetter Paul R. Johnson James Jones Kenneth Kettle Chad Kiger J. Koepfinger Robert Konnik Kofi Korsah Jim Kulchisky Chung-Yiu Lam Gerald L

29、iskom Daniel Mainstruck Arturo Maldonado John Merando Michael S. Newman Nick S. A. Nikjoo James Parello Chris Pegge Jan Pirrong Jonathan Pirrong Michael Roberts John Rosko Fred Roy Steve Sandberg Bartien Sayogo Glen Schinzel Gil Shultz Jerry Smith Rebecca Steinman Gary Stoedter Joe Uchiyama Marco Va

30、nuffelen John Vergis Lukas VonCopyright 2013 IEEE. All rights reserved. viii When the IEEE-SA Standards Board approved this standard on 10 September 2011, it had the following membership: Richard H. Hulett, Chair John Kulick, Vice Chair Robert M. Grow, Past Chair Judith Gorman, Secretary Masayuki Ar

31、iyoshi William Bartley Ted Burse Clint Chaplin Wael Diab Jean-Philippe Faure Alexander Gelman Paul Houz Jim Hughes Joseph L. Koepfinger* David J. Law Thomas Lee Hung Ling Oleg Logvinov Ted Olsen Gary Robinson Jon Walter Rosdahl Sam Sciacca Mike Seavey Curtis Siller Phil Winston Howard L. Wolfman Don

32、 Wright *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Satish K. Aggarwal, NRC Representative Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Don Messina IEEE Standards Program Manager, Document Development Laurie Policastro IEE

33、E Standards Program Manager, Technical Program Development Copyright 2013 IEEE. All rights reserved. ix Introduction This introduction is not part of IEEE Std 1682-2011, IEEE Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems in Nuclear Power

34、 Generating Stations. This standard provides general requirements, directions, and methods for qualifying Class 1E fiber optic cables, terminations, field splices, connectors, and interfaces for service in nuclear facilities including power generating stations, fuel reprocessing stations, and other

35、related installations. Copyright 2013 IEEE. All rights reserved. x Contents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 2 2. Normative references 2 3. Definitions, acronyms, and abbreviations 2 3.1 Definitions . 2 3.2 Acronyms and abbreviations . 3 4. Principle qualification criteria 3 5. Principles of

36、qualification . 4 5.1 Qualification by type testing 4 5.2 Qualification by operating experience . 4 5.3 Qualification by analysis . 5 5.4 Extending qualified life . 5 5.5 Combined qualification . 6 6. Qualification by type testing methods 6 6.1 Type test sample selection . 6 6.2 Description of fiber

37、 optic cables and components . 8 6.3 Age conditioning 12 6.4 Test procedures .12 7. Qualification for normal and mild environments 17 8. Flame test qualification .17 9. Documentation 18 9.1 General .18 9.2 Type test documentation .18 9.3 Documentation of qualification by methods other than type test

38、ing 19 9.4 Traceability of materials .19 10. Modifications .19 Annex A (informative) Cable families .20 A.1 Example of applicability of cable families 20 Annex B (informative) Bibliography.21 Copyright 2013 IEEE. All rights reserved. 1 IEEE Standard for Qualifying Fiber Optic Cables, Connections, an

39、d Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating Stations IMPORTANT NOTICE: IEEE Standards documents are not intended to ensure safety, health, or environmental protection, or ensure against interference with or from other devices or networks. Implementers of IEEE Standa

40、rds documents are responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations. This IEEE document is made available for use subject to important notices and legal disclaimers. Th

41、ese notices and disclaimers appear in all publications containing this document and may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers

42、.html. 1. Overview 1.1 Scope This standard provides requirements, directions, and methods for qualifying fiber optic cables, connections, and optical fiber splices for use in safety systems of nuclear power generating stations. Cables, connections, optical fibers, and splices within or integral to o

43、ther devices (e.g., sensors, instruments, panels, etc.) shall be qualified using the requirements in the applicable device standard or IEEE Std 323TM-2003, as appropriate. However, this standards requirements may be applied to the fiber optic cable, connections, and optical fiber splices within thes

44、e devices. IEEE Std 1682-2011 IEEE Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating Stations Copyright 2013 IEEE. All rights reserved. 2 1.2 Purpose The principal purpose of this standard is to provide specific d

45、irections for the implementation of IEEE Std 323TM-2003 for qualification of fiber optic cables, including hybrid cables, connections, and optical fiber splices. 2. Normative references The following referenced documents are indispensable for the application of this document (i.e., they must be unde

46、rstood and used, so each referenced document is cited in text and its relationship to this document is explained). For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments or corrigenda) applies. IEEE Std 1T

47、M-2000, IEEE Recommended PracticeGeneral Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation.1,2IEEE Std 98TM-2002, IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Mater

48、ials. IEEE Std 101TM-1987, IEEE Guide for the Statistical Analysis of Thermal Life Test Data. IEEE Std 323TM-2003, IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations. IEEE Std 344TM-2004, IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for

49、 Nuclear Power Generating Stations. IEEE Std 1202TM-2006, IEEE Standard for Flame-Propagation Testing of Wire and Cable. IEEE Std 1205TM-2000, IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations. 3. Definitions, acronyms, and abbreviations 3.1 Definitions For the purposes of this document, the following terms and definitions apply. The IEEE Standards Dictionary: Glossary of Terms however, it may be used if the in-service samples have performed successfully during applicable DBE c