ANSI IEEE C63.12-2015 Recommended Practice for Electromagnetic Compatibility Limits and Test Levels.pdf

1、 American National Standard Recommended Practice for Electromagnetic Compatibility Limits and Test Levels Accredited by the American National Standards Institute IEEE 3 Park Avenue New York, NY 10016-5997 USA Accredited Standards Committee C63Electromagnetic Compatibility ANSI C63.12-2015C63ANSI C63

2、.12-2015 (Revision of ANSI C63.12-1999) American National Standard Recommended Practice for Electromagnetic Compatibility Limits and Test Levels Accredited Standards Committee C63Electromagnetic Compatibility accredited by the American National Standards Institute Secretariat Institute of Electrical

3、 and Electronics Engineers, Inc. Approved 18 June 2015 American National Standards Institute Abstract: A rationale and recommendations for developing emission limits and immunity test levels are presented in this recommended practice. These limits and levels are representative of current practice an

4、d user needs. Emission limits are specified by national and international standards bodies. Emission limits for the most part are regulated and hence controlled, which is the case in the U.S. and Canada. Such regulatory limits take precedence, even if the limits are different from those considered i

5、n this document. For product immunity, while in some parts of the world this is regulated, for the U.S. and Canada, it is not regulated except for some types of safety equipment. In this way, adequate immunity is more a quality aspect of the product because it does not operate in its intended RF env

6、ironment, the user would deem it of poor design and quality. The immunity test levels described in this document are representative of common levels applied internationally. However, severe environments (in which levels of electromagnetic disturbance are high) require the consideration of applying h

7、igher test levels. This consideration is described in this recommended practice. Finally, it should be noted that the entire recommended practice does not contain normative requirements, as such practices remain optional. Keywords: ambient noise levels, ANSI C63.12, atmospheric noise, electromagneti

8、c compatibility (EMC), emissions, galactic noise, immunity, limits, man-made noise, test levels American National Standard The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2016 by The Institute of Electrical and Electronics Engineers,

9、Inc. All rights reserved. Published 29 January 2016. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent (978) 750-8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearan

10、ce Center. Errata Users are encouraged to check the IEEE Errata URL (http:/standards.ieee.org/findstds/errata/index.html), and the one for ASC C63at (http:/www.c63.org/explanations_interpretations_request.htm, for errata periodically. Interpretations (ASC C63standards) Current interpretations are es

11、sential to the understanding of all ASC C63standards. To assist in the meanings of requirements, informative interpretations are available at the following URL: (http:/www.c63.org/standards_development.htm). Users are cautioned that, although interpretations do not and cannot change the requirements

12、 of a standard, they serve to clarify the meanings of requirements. All interpretations are informative rather than normative, until such time as the standard is revised (consistent with ASC C63ANSI-accredited operating procedures) to incorporate the interpretation as a normative requirement. iv Cop

13、yright 2016 IEEE. All rights reserved. Important Notices and Disclaimers Concerning IEEE Standards Documents IEEE documents are made available for use subject to important notices and legal disclaimers. These notices and disclaimers, or a reference to this page, appear in all standards and may be fo

14、und under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Standards Documents.” Notice and Disclaimer of Liability Concerning the Use of IEEE Standards Documents IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use,

15、 are developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a consensus development process, approved by the American National Standards Institute (“ANSI”), which b

16、rings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and participate without compensation from IEEE. While IEEE administers the process and establishes rules to promote fairness in the consensus d

17、evelopment process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standards. IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly disclaim

18、s all warranties (express, implied and statutory) not included in this or any other document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completenes

19、s of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other w

20、ays to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comme

21、nts received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any pers

22、on utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL

23、IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

24、STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process

25、 involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. v Copyright 2016 IEEE. All rights reserved. Official statements A statement, written or oral, that is not p

26、rocessed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or education

27、al courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from an

28、y interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting co

29、mments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to

30、 provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant

31、 IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions

32、 of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is no

33、t in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private

34、uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any

35、rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payme

36、nt of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. vi Cop

37、yright 2016 IEEE. All rights reserved. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or erra

38、ta. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone

39、 a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is t

40、he current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards developme

41、nt process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents A

42、ttention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent

43、 holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant

44、 licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been re

45、ceived. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of

46、 Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be

47、 obtained from the IEEE Standards Association. vii Copyright 2016 IEEE. All rights reserved. Participants At the time this recommended practice was published, Accredited Standards Committee C63Electromagnetic Compatibility had the following membership: Daniel Hoolihan, Chair Dan Sigouin, Vice Chair

48、Jerry Ramie, Secretary Sue Vogel, Secretariat Organization Represented Name of Representative AlcatelLucent Dheena Moongilan American Council of Independent Laboratories (ACIL) . Harry H. Hodes John Repella (Alt.) American Radio Relay League (ARRL) Edward F. Hare .Kermit Carlson (Alt.) Apple, Inc. .

49、 Manjit Walia Indrandil Sen (Alt.) Blackberry Corporation . Masud Attayi Daoud Attayi (Alt.) Bureau Veritas . Jonathan Stewart Cisco Systems Andy Griffin Dave Case (Alt.) Dell Inc. . Richard Worley ETS-Lindgren Zhong Chen . Michael Foegelle (Alt.) Federal Communications Commission (FCC) . William Hurst Steve Jones (Alt.) Food and Drug Administration (FDA) . Jeffrey L. Silberberg . Donald M. Witters (Alt.) Industry Canada .Jason Nixon . Horia Popovici (Alt.) Information Technology Industry Council (ITIC) John Hirvela Joshua Rosenberg (Alt.) IEEE-Electromagnetic Co