ANSI IEEE C93.3-2017 Requirements for Power-Line Carrier Line Traps (30 kHz to 500 kHz).pdf

1、IEEE Standard Requirements for Power-Line Carrier Line Traps(30 kHz to 500 kHz)IEEE Std C93.3-2017IEEE Power and Energy SocietySponsored by the Power System Communications and CybersecurityIEEE3 Park AvenueNew York, NY 10016-5997USAIEEE Std C93.3-2017IEEE Standard Requirements for Power-Line Carrier

2、 Line Traps(30 kHz to 500 kHz)Sponsor Power System Communications and Cybersecurity of the IEEE Power and Energy SocietyApproved 14 February 2017IEEE-SA Standards BoardAbstract: Line traps inserted into a power line to provide a high impedance at power-line-carrier frequencies (30 kHz to 500 kHz) ar

3、e covered in this standard. The purpose is to isolate the carrier signal from system impedance changes due to faults or switching behind the point of insertion, and to guide the signal in the proper direction. The standard covers line traps in which the main coil is designed as a single-phase, air-c

4、ooled inductor of the dry type.Keywords: IEEE C93.3, line trap, PLC, power line carrier, wave trapThe Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2017 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. P

5、ublished 1 August 2017. Printed in the United States of America.,(LVDUHJLVWHUHGWUDGHPDUNLQWKH863DWHQW 7UDGHPDUN2FHRZQHGE7KH,QVWLWXWHRI(OHFWULFDODQG(OHFWURQLFV(QJLQHHUVIncorporated.PDF: ISBN 978-1-5044-3971-8 STD22546Print: ISBN 978-1-5044-3972-5 STDPD22546IEEE prohibits discrimination, harassment, a

6、nd bullying.For more information, visit http:/ www .ieee .org/ web/ aboutus/ whatis/ policies/ p9 -26 .html.No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher.3Copyright 2017 IEEE. All right

7、s reserved.Important Notices and Disclaimers Concerning IEEE Standards DocumentsIEEE documents are made available for use subject to important notices and legal disclaimers. These notices and disclaimers, or a reference to this page, appear in all standards and may be found under the heading “Import

8、ant Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be obtained on request from IEEE or viewed at http:/ standards .ieee .org/ IPR/ disclaimers .html.Notice and Disclaimer of Liability Concerning the Use of IEEE Standards DocumentsIEEE Standards documents (standards, reco

9、mmended practices, and guides), both full-use and trial-use, are developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a consen-sus development process, approved b

10、y the American National Standards Institute (“ANSI”), which brings WRJHWKHUYROXQWHHUVUHSUHVHQWLQJYDULHGYLHZSRLQWVDQGLQWHUHVWVWRDFKLHYHWKHQDOSURGXFW,(6WDQ-GDUGVDUHGRFXPHQWVGHYHORSHGWKURXJKVFLHQWLFDFDGHPLFDQGLQGXVWUEDVHGWHFKQLFDOZRUNLQJJURXSV 9ROXQWHHUVLQ,(ZRUNLQJJURXSVDUHQRWQHFHVVDULOPHPEHUVRIWKH,QVW

11、LWXWHDQGSDUWLFLSDWHZLWKRXWFRP-pensation from IEEE. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contain

12、ed in its standards.IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure DJDLQVWLQWHUIHUHQFHZLWKRUIURPRWKHUGHYLFHVRUQHWZRUNV,PSOHPHQWHUVDQGXVHUVRI,(6WDQGDUGVGRF-uments are responsible for determining and complying with all appropriate safety, sec

13、urity, environmental, health, and interference protection practices and all applicable laws and regulations.IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly disclaims all warranties (express, implied and statutory) not included in t

14、his or any other document UHODWLQJWRWKHVWDQGDUGLQFOXGLQJEXWQRWOLPLWHGWRWKHZDUUDQWLHVRIPHUFKDQWDELOLWWQHVVIRUDSDUWLFXODUSXUSRVHQRQLQIULQJHPHQWDQGTXDOLWDFFXUDFH uHFWLYHQHVVFXUUHQFRUFRPSOHWHQHVVRIPDWHULDO,QDGGLWLRQ,(GLVFODLPVDQDQGDOOFRQGLWLRQVUHODWLQJWRUHVXOWVDQGZRUNPDQOLNHH uRUW,(VWDQGDUGVdocuments ar

15、e supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there DUHQRRWKHUZDVWRSURGXFHWHVWPHDVXUHSXUFKDVHPDUNHWRUSURYLGHRWKHUJRRGVDQGVHUYLFHVUHODWHGWRthe scope of the IEEE standard. Furthermore, the viewpoint expressed

16、 at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard.,QSXEOLVKLQJDQGPDNLQJLWVVWDQGDUGVDYDLODEOH,(LVQRWVXJJHVWLQJRUUHQGHULQJSURIHVVLRQDORURWKHUVHUYLFHVIRURURQEHKDOIRIDQSHUVRQRUHQ

17、WLWQRULV,(XQGHUWDNLQJWRSHUIRUPDQGXWRZHGEDQother person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropri-DWHVHHNWKHDGYLFHRIDFRPSHWHQWSURIHVVLRQDOLQ

18、GHWHUPLQLQJWKHDSSURSULDWHQHVVRIDJLYHQ,(VWDQGDUGIN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE-MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HO

19、WEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CON-TRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE W

20、AS FORESEEABLE.4Copyright 2017 IEEE. All rights reserved.TranslationsThe IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.2

21、FLDOVWDWHPHQWVA statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations 0DQXDOVKDOOQRWEHFRQVLGHUHGRULQIHUUHGWREHWKHR vFLDOSRVLWLRQRI,(RUDQRILWVFRPPLWWHHVDQGVKDOOnot be considered to be, or be relied upon as, a formal position of IEEE. At lectures,

22、symposia, seminars, or HGXFDWLRQDOFRXUVHVDQLQGLYLGXDOSUHVHQWLQJLQIRUPDWLRQRQ,(VWDQGDUGVVKDOOPDNHLWFOHDUWKDWKLVRUKHUviews should be considered the personal views of that individual rather than the formal position of IEEE.Comments on standardsComments for revision of IEEE Standards documents are welco

23、me from any interested party, regardless RIPHPEHUVKLSD vOLDWLRQZLWK,(+RZHYHU,(GRHVQRWSURYLGHFRQVXOWLQJLQIRUPDWLRQRUDGYLFH pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Si

24、nce IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide a

25、n instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to LQWHUSUHWDWLRQUHTXHVWV$QSHUVRQZKRZRXOGOLNHWRSDUWLFLSDWHLQUHYLVLRQVWRDQ,(VWDQGDUGLVZHOFRPHWRMRLQWKHUHOHYDQW,(ZRUNLQJJURXSComments on standard

26、s should be submitted to the following address:Secretary, IEEE-SA Standards Board445 Hoes LanePiscataway, NJ 08854 USALaws and regulationsUsers of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply

27、 compliance to any applicable regulatory require-ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and the

28、se documents may not be construed as doing soCopyrightsIEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in law

29、s and regulations, and use in private self-regulation, standardization, and the pro-PRWLRQRIHQJLQHHULQJSUDFWLFHVDQGPHWKRGV%PDNLQJWKHVHGRFXPHQWVDYDLODEOHIRUXVHDQGDGRSWLRQEpublic authorities and private users, IEEE does not waive any rights in copyright to the documents.5Copyright 2017 IEEE. All right

30、s reserved.PhotocopiesSubject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please

31、 contact Copyright Clearance Center, Customer Ser-vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center.Updating of IEEE Standards documen

32、tsUsers of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corri-JHQGDRUHUUDWD$QR vFLDO,(GRFXPHQWDWDQSRLQWLQWLPHFRQVLVWVRIWKHFXUUHQWHGLWLRQRIWKHGRFXPHQW

33、WRJHWKHUZLWKDQDPHQGPHQWVFRUULJHQGDRUHUUDWDWKHQLQH uHFWEvery IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some YDOXHGRQRWZKROOUHHFWWKH

34、SUHVHQWVWDWHRIWKHDUW8VHUVDUHFDXWLRQHGWRFKHFNWRGHWHUPLQHWKDWWKHKDYHthe latest edition of any IEEE standard.In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ i

35、eeexplore .ieee .org/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/ standards .ieee .org.ErrataErrata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the f

36、ollowing URL: http:/ VWDQGDUGVLHHHRUJQGVWGVHUUDWDLQGHKWPO8VHUVDUHHQFRXUDJHGWRFKHFNWKLV85/IRUHUUDWDSHULRGLFDOOPatentsAttention is called to the possibility that implementation of this standard may require use of subject matter FRYHUHGESDWHQWULJKWV%SXEOLFDWLRQRIWKLVVWDQGDUGQRSRVLWLRQLVWDNHQEWKH,(ZLWKU

37、HVSHFWWRWKHexistence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has OHGDVWDWHPHQWRIDVVXUDQFHYLDDQ$FFHSWHG/HWWHURI$VVXUDQFHWKHQWKHVWDWHPHQWLVOLVWHGRQWKH,(SA Website at http:/ standards .ieee .org/ about/ sasb/ patcom/ patents .html. Letters of Ass

38、urance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrim-ination to applicants desiring to obtain such licenses.Essenti

39、al Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not re-sponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination o