ANSI INCITS 404-2006 For Information Technology C Fibre Channel C Physical Interfaces-2 (FC-PI-2).pdf

1、American National StandardDeveloped byfor Information Technology Fibre Channel Physical Interfaces-2 (FC-PI-2)ANSI INCITS 404-2006ANSIINCITS404-2006ANSIINCITS 404-2006American National Standardfor Information Technology Fibre Channel Physical Interfaces-2(FC-PI-2)SecretariatInformation Technology In

2、dustry CouncilApproved August 11, 2006 American National Standards Institute, Inc.AbstractThis standard describes the point-to-point physical interface portions of Fibre Channel high performanceelectrical and optical link variants that support the higher level Fiber Channel protocols including FC-FS

3、,HIPPI, IPI, SCSI and others. This standard is recommended for new implementations but does not obso-lete the existing Fibre Channel standards.Approval of an American National Standard requires review by ANSI that therequirements for due process, consensus, and other criteria for approval havebeen m

4、et by the standards developer.Consensus is established when, in the judgement of the ANSI Board ofStandards Review, substantial agreement has been reached by directly andmaterially affected interests. Substantial agreement means much more thana simple majority, but not necessarily unanimity. Consens

5、us requires that allviews and objections be considered, and that a concerted effort be madetowards their resolution.The use of American National Standards is completely voluntary; theirexistence does not in any respect preclude anyone, whether he has approvedthe standards or not, from manufacturing,

6、 marketing, purchasing, or usingproducts, processes, or procedures not conforming to the standards.The American National Standards Institute does not develop standards andwill in no circumstances give an interpretation of any American NationalStandard. Moreover, no person shall have the right or aut

7、hority to issue aninterpretation of an American National Standard in the name of the AmericanNational Standards Institute. Requests for interpretations should beaddressed to the secretariat or sponsor whose name appears on the titlepage of this standard.CAUTION NOTICE: This American National Standar

8、d may be revised orwithdrawn at any time. The procedures of the American National StandardsInstitute require that action be taken periodically to reaffirm, revise, orwithdraw this standard. Purchasers of American National Standards mayreceive current information on all standards by calling or writin

9、g the AmericanNational Standards Institute.American National StandardPublished byAmerican National Standards Institute, Inc.25 West 43rd Street, New York, NY 10036Copyright 2006 by Information Technology Industry Council (ITI)All rights reserved.No part of this publication may be reproduced in anyfo

10、rm, in an electronic retrieval system or otherwise,without prior written permission of ITI, 1250 Eye Street NW, Washington, DC 20005. Printed in the United States of AmericaCAUTION: The developers of this standard have requested that holders of patents that may berequired for the implementation of t

11、he standard disclose such patents to the publisher. However,neither the developers nor the publisher have undertaken a patent search in order to identifywhich, if any, patents may apply to this standard. As of the date of publication of this standardand following calls for the identification of pate

12、nts that may be required for the implementation ofthe standard, no such claims have been made. No further patent search is conducted by the de-veloper or publisher in respect to any standard it processes. No representation is made or impliedthat licenses are not required to avoid infringement in the

13、 use of this standard.iContentsPageForeword . xiii1 Scope. 12 References . 12.1 Standards. 12.2 Normative references 12.2.1 Approved references . 12.2.2 References under development 32.3 Informative references 33 Definitions and conventions 43.1 Definitions . 43.2 Editorial conventions 123.2.1 Conve

14、ntions. 123.2.2 Abbreviations, acronyms, and symbols . 124 Structure and Concepts . 154.1 Fibre Channel Structure. 154.2 FC-0 general description 164.3 FC-0 interface overview 184.4 Data flow stages 195 FC-PI-2 functional characteristics 205.1 General characteristics 205.2 FC-0 States 215.2.1 Transm

15、itter FC-0 states 215.2.2 Receiver States 225.3 Response to input data phase jumps. 225.4 Limitations on invalid code. 225.5 Receiver initialization time . 225.6 Loss of signal (Rx_LOS) function 235.7 Speed agile Ports that support Speed Negotiation 235.8 FC-PI-2 nomenclature 245.9 Interoperability

16、points. 245.10 FC-PI-2 technology options . 326 Optical interface specification . 336.1 TxRx connections 336.2 Laser safety issues 336.3 SM data links . 336.3.1 SM general information 33iiPage6.3.2 SM optical output interface 336.3.3 SM optical input interface 366.3.4 SM jitter budget 366.3.5 SM tra

17、de-offs 396.4 MM data links 416.4.1 MM general information . 416.4.2 MM optical output interface 416.4.3 MM optical input interface 456.4.4 MM jitter budget . 457 Optical interfaces . 487.1 Optical interface general information . 487.2 SC optical interface 487.2.1 SC performance information 487.2.2

18、SC optical plug. 487.2.3 SC Duplex optical receptacle. 497.3 SG optical interface . 497.4 LC optical interface 497.5 MT-RJ optical interface 507.5.1 MT-RJ performance information 507.6 MU Connector 518 Optical fiber cable plant specification 528.1 SM cable plant specification 528.1.1 SM cable plant

19、overview . 528.1.2 SM optical fiber type 528.1.3 SM cable plant loss budget 528.1.4 SM optical return loss 528.2 MM cable plant specification 528.2.1 MM cable plant overview . 528.2.2 MM optical fiber types 538.2.3 MM modal bandwidth. 538.2.4 MM cable plant loss budget . 538.2.5 MM optical return lo

20、ss 548.3 Connectors and splices . 549 Electrical interface specification - Single lane variants 559.1 General electrical characteristics. 559.2 Electrical TxRx connections. 559.2.1 TxRx general overview 559.2.2 Partially separable links . 569.3 Transmitted signal characteristics . 579.3.1 General 57

21、9.3.2 400-DF-EL-S transmitted signal requirements . 599.3.3 400-DF-EL-S Signal tolerance amplitude andjitter requirements at transmit interoperability points 609.3.4 Return loss at the transmitted compliance points 61iiiPage9.3.5 400-DF-EL-S Transmitter common mode return loss 639.4 Received signal

22、characteristics 639.4.1 General 639.4.2 400-DF-EL-S Signal tolerance amplitude and jitter requirements at receive interoperability points. 659.4.3 Return loss at the received compliance points. 679.4.4 400-DF-EL-S Receiver common mode return loss 699.5 Jitter characteristics . 699.6 Eye masks 729.6.

23、1 Overview 729.6.2 Transmitted eye mask at T, Tand T739.6.3 Received eye mask at R, Rand R. 749.6.4 Jitter tolerance masks 749.7 Grounding and shielding requirements at interoperability points . 769.8 Transmitter device characteristics 779.9 Return loss and impedance requirements . 789.10 Receiver c

24、haracteristics . 809.11 Transmitter Compliance Transfer Function 819.11.1 TCTF overview. 819.11.2 400-DF-EL-S intra enclosure Transmitter Compliance Transfer Function 819.11.3 400-DF-EL-S Inter cabinet Transmitter Compliance Transfer Function 829.12 Test loads 839.13 Example TxRx connections 8410 El

25、ectrical cable plant and connector specifications for single lane variants 8610.1 Overview 8610.2 Shielding 8610.3 Cable interoperability . 8610.4 Unbalanced cable connectors 8610.4.1 Inter-enclosure connectors for unbalanced cable 8610.4.2 Intra-enclosure connectors for unbalanced cable 8710.5 Bala

26、nced cable connectors 8810.5.1 Balanced cable wiring 8810.5.2 Inter-enclosure connectors for balanced cable 8810.5.3 Intra-enclosure connectors for balanced cable 9210.5.4 Integral FC device balanced connector 9210.5.5 Non-device inter-enclosure connectors 9311 Electrical cable interface and interco

27、nnect specifications for quad-lane variants 9511.1 Overview 95ivPage11.2 Transmitted signal and transmitter characteristics 9611.2.1 General characteristics 9611.2.2 Transmitted amplitude and swing 9711.2.3 Transmitter return loss. 9811.2.4 Transmitter template and jitter . 9811.3 Receiver character

28、istics. 9911.3.1 General characteristics 9911.3.2 Reference input signals . 9911.3.3 Input signal amplitude 10011.3.4 AC coupling . 10011.3.5 Input impedance 10011.3.6 Jitter tolerance . 10111.4 Interconnect characteristics . 10111.5 Electrical measurement requirements . 10211.5.1 Transmitter Compli

29、ance Transfer Function measurements. 10211.5.2 Eye template measurements . 10311.5.3 Jitter test requirements 10411.5.4 Transmit jitter . 10411.5.5 Jitter tolerance . 10411.6 Electrical cable plant and connector specification - Parallel variants 10511.6.1 General overview 10511.6.2 Shielding 10511.6

30、.3 Connector Description . 10511.6.4 Multi quad lane applications 10711.6.5 Quad Lane Pin Assignments . 10911.6.6 Alternate signal definitions. 11012 Very Long Length Optical Interface (SM-LL-V) 11312.1 Introduction 11312.2 FC-0 additional technology option . 11312.3 SM cable plant specification 113

31、12.4 Optical fiber interface specification 11312.4.1 SM-LL-V data links 11312.4.2 SM optical response specifications 11512.4.3 SM-LL-V jitter output specifications . 11512.5 Optical fiber cable plant specification 11512.6 Cable plant loss budget . 116AnnexesA IEC 61280-2-2 Test Methods. 117A.1 Trans

32、mit interface 117A.1.1 Optical spectrum measurement. 117A.1.2 Waveforms 117A.1.3 Jitter measurements 118vPageA.1.4 Skew measurement . 118A.1.5 Common mode voltage measurement. 118A.2 Receive interface . 119A.3 Relative intensity noise (RIN) (OMA) measuring procedure 119A.3.1 Test objective. 119A.3.2

33、 General test description . 119A.3.3 Component descriptions 120A.3.4 Test Procedure. 121A.4 Optical modulation amplitude (OMA) test procedure . 122A.5 Optical receiver sensitivity test. 123A.6 Measurement of the optical receiver upper cutoff frequency . 126B Signal performance measurements for 400-D

34、F-EL-S electrical variants 129B.1 Introduction 129B.1.1 A simple connection . 129B.1.2 Assumptions for the structure of the transmitter device and the receiver device. 130B.1.3 Definition of receiver sensitivity and receiver device sensitivity . 131B.2 Measurement architecture requirements . 132B.2.

35、1 General 132B.2.2 Relationship between signal compliance measurements at interoperability points and operation in systems . 133B.3 De-embedding connectors in test fixtures 133B.4 Measurement conditions for signal output (DSO) at the transmitter device 134B.5 Measurement conditions for signal tolera

36、nce (DST) at the transmitter device 135B.6 Measurement conditions for signal output (DSO) at the receiver device 136B.7 Measurement conditions for signal tolerance (DST) at the receiver device 137B.8 S-parameter measurements 138B.8.1 Introduction 138B.8.2 Naming conventions in high speed serial link

37、s 138B.8.3 Use of single ended instrumentation in differential applications 139B.9 Measurement configurations for link elements. 140B.9.1 Overview 140viPageB.9.2 Transmitter device return loss . 141B.9.3 Receiver device return loss . 141B.9.4 Return loss at the transmitter device connector (intercon

38、nect input) . 142B.9.5 S22 at the receiver device connector (interconnect output) 143B.10 Summary for S-parameter measurements 144C Optical cable plant usage 145D Cable plant employing cross-connects 149D.1 Characteristics of fiber optic cabling 149E SERDES electrical interface example . 151E.1 Gene

39、ral overview 151E.2 Communications levels 152E.2.1 PECL . 152E.2.2 SSTL_2 153E.3 Serial interfaces . 153E.3.1 Transmit serial interface 153E.3.2 Receiver serial interface 154E.3.3 Receiver Retimed clock and data serial interface 154E.4 Parallel interfaces 154E.4.1 Voltage levels 154E.4.2 Bus data ra

40、te . 154E.4.3 Transmit parallel interface . 154E.4.4 Receive parallel interface 156E.5 REFCLK0:1 158E.6 Support functions 159E.6.1 Acquisition of receiver bit synchronization. 159E.6.2 Receive byte alignment . 159E.6.3 Loopback function 159F Tx_Off and Rx_Loss of Signal detection . 161F.1 Background

41、 161F.2 Scope. 161F.3 Functional and Timing Specifications 162F.3.1 Component specifications 162F.3.2 Tx_Off . 162F.3.3 Rx_LOS . 162viiPageF.4 Optical Tx_Off and Rx_LOS Signal Levels 163F.5 Electrical Tx_Off Signal Levels 163F.6 Electrical Rx_LOS Signal Levels 163F.7 Methods of Measurement for Elect

42、rical Rx_LOS Thresholds 163Figures1 Fibre channel structure 152 Node functional configuration. 163 FC-0 Link 174 Fabric . 175 FC-0 Path. 176 Fibre channel building wiring 187 Data flow stages. 198 FC variant nomenclature 249 Example of physical location of reference and interoperability points 2510

43、Interoperability points examples at connectors 2611 Tx interoperability points (examples) . 2712 Rx interoperability points (examples). 2813 Hub interoperability points (example). 2914 Examples of interoperability points 3015 Overview of the signal specification architecture . 3116 SM transmitter ey

44、e diagram mask . 3417 Sinusoidal jitter mask . 3918 1,06 GBd SM 10 km link 3919 2,12 GBd SM 10 km link 4020 4,25 GBd SM 10 km link 4021 4,25 GBd SM 4 km link 4122 MM transmitter eye diagram mask. 4223 Duplex SC optical interface 4824 SG interface . 4925 Duplex LC interface 5026 MT connector interfac

45、e 5027 MU connector interface 5128 Duplex Beta TxRx connections example . 5629 Partially Separable links examples 57viiiPage30 Transmit device output, two idealized load conditions, Zero length and through TCTF . 6031 Transmit, System (Interconnect Bob Snivelyfor his guidance through the standards m

46、aze; and Roger Cummings for, without him,the various versions of this standard would have never made it up to the T11 website.1American National Standard ANSI INCITS 404-2006American National Standardfor Information TechnologyFibre Channel Physical Interfaces-2 (FC-PI-2)1 ScopeThis International Sta

47、ndard describes the physical interface portions of high-performance electricaland optical link variants that support the higher level Fiber Channel protocols including FC-FS, thehigher Upper Level Protocols (ULPs) associated with HIPPI, IPI, SCSI, IP and others.This document contains all the require

48、ments specified in FC-PI and SM-LL-V, plus additional require-ments relating to 400 MBytes/s copper, 1 200 MBytes/s (10GFC) copper and 400 MBytes/s mediumreach (400-SM-LC-M) variants. When FC-PI-2 is published SM-LL-V will be withdrawn and the re-quirements for variants formerly specified in SM-LL-V

49、 will be specified only in FC-PI-2. SM-LL-Vneeds to be withdrawn because SM-LL-V depends on the FC-PH standard that has been withdrawn.The technical content of SM-LL-V is unchanged in FC-PI-2. FC-PI-2 also includes additional copperand optical connector options.FC-PI-2 does not replace FC-PI but is intended to carry forward the technical requireme