ANSI INCITS ISO IEC 13842-1995 for Information Technology 130 mm Optical Disk Cartridges for Information Interchange Capacity 2 Gbytes per Cartridge (Adopted by INCITS).pdf

1、 INCITS/ISO/IEC 13842-1995 (R2001)(formerly ANSI/ISO/IEC 13842-1995 (R2001)for Information Technology 130 mm Optical Disk Cartridgesfor Information Interchange Capacity: 2 Gbytes per CartridgeAmericanNationalStandardApproval of an American National Standard requires review by ANSI that therequiremen

2、ts for due process, consensus, and other criteria for approval havebeen met by the standards developer.Consensus is established when, in the judgment of the ANSI Board of StandardsReview, substantial agreement has been reached by directly and materiallyaffected interests. Substantial agreement means

3、 much more than a simplemajority, but not necessarily unanimity. Consensus requires that all views andobjections be considered, and that a concerted effort be made toward theirresolution.The use of American National Standards is completely voluntary; their existencedoes not in any respect preclude a

4、nyone, whether he has approved the standardsor not, from manufacturing, marketing, purchasing, or using products, processes,or procedures not conforming to the standards.The American National Standards Institute does not develop standards and will inno circumstances give an interpretation of any Ame

5、rican National Standard.Moreover, no person shall have the right or authority to issue an interpretation ofan American National Standard in the name of the American National StandardsInstitute. Requests for interpretations should be addressed to the secretariat orsponsor whose name appears on the ti

6、tle page of this standard.CAUTION NOTICE: This American National Standard may be revised orwithdrawn at any time. The procedures of the American National StandardsInstitute require that action be taken periodically to reaffirm, revise, or withdrawthis standard. Purchasers of American National Standa

7、rds may receive currentinformation on all standards by calling or writing the American National StandardsInstitute.Published byAmerican National Standards Institute11 West 42nd Street, New York, New York 10036Copyright 1996 by Information Technology Industry Council (ITI)All rights reserved.These ma

8、terials are subject to copyright claims of International Standardization Organization (ISO),International Electrotechnical Commission (IEC), American National Standards Institute (ANSI), andInformation Technology Industry Council (ITI). Not for resale. No part of this publication may bereproduced in

9、 any form, including an electronic retrieval system, without the prior written permission of ITI.All requests pertaining to this standard should be submitted to ITI, 1250 Eye Street NW, Washington, DC20005.Printed in the United States of AmericaAmerican National Standard for Information Technology -

10、 130 mm Optical Disk Cartridges for Information Interchange - Capacity: 2 Gbytes per Cartridge Secretariat Information Technology Industry Council Approved June 19, 1996 American National Standards Institute, Inc. _-. _-._ - _- - ISO/IEC 13842:1995 (E) Contents Section 1: General 1 Scope 2 Conforman

11、ce 2.1 Optical Disk Cartridge (ODC) 2.2 Generating system 2.3 Receiving system 2.4 Compatibility statement 3 Normative reference 4 Definitions 4.1 band 4.2 case 4.3 clamping zone 4.4 control track 4.5 Cyclic Redundancy Check (CRC) 4.6 defect management 4.7 disk reference plane 4.8 entrance surface 4

12、.9 Error Correction Code (ECC) 4.10 format 4.11 hub 4.12 interleaving 4.13 Kerr rotation 4.14 land and groove 4.15 logical track 4.16 mark 4.17 mark edge 4.18 mark edge recording 4.19 optical disk 4.20 optical disk cartridge (ODC) 4.21 physical track 4.22 polarization 4.23 pre-recorded mark 4.24 rea

13、d power 4.25 recording layer 1 1 1 : 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 ii %O/IEC 4.26 Reed-Solomon code 4.27 spindle 4.28 substrate 4.29 track pitch 4.30 write-inhibit hole 4.31 write once functionality 4.32 zone 5 Conventions and notations 5.1 Representation of numbers 5

14、.2 Names 6 List of acronyms 7 General description of the optical disk cartridge 8 General requirements 8.1 Environments 8.1.1 Test environment 8.1.2 Operating environment 8.1.3 Storage environment 8.1.4 Transportation 8.2 Temperature shock 8.3 Safety requirements 8.4 Flammability 9 Reference Drive 9

15、.1 Optical system 9.2 Optical beam 9.3 Read channels 9.4 Tracking 9.5 Rotation of the disk Section 2: Mechanical and physical characteristics 10 Dimensional and physical characteristics of the case 10.1 General description of the case 10.2 Relationship of Sides A and B 10.3 Reference axes and case r

16、eference planes 10.4 Case drawings 10.5 Dimensions of the case 10.5.1 Overall dimensions 10.52 Location hole 10.5.3 Alignment hole 10.54 Surfaces on Reference Planes P 10.55 Insertion slots and detent features 10.5.6 Gripper slots 10.57 Write-inhibit holes 10.5.8 Media sensor holes 10.59 Head and mo

17、tor window 10.5.10 Shutter 10.5.11 Slot for shutter opener 10.512 Shutter sensor notch 10.5.13 User label areas 10.6 Mechanical characteristics 3 3 4 4 4 5 5 6 - 6 6 6 9 9 9 10 11 11 12 13 13 13 15 16 16 17 17 17 . . . III ISO/IEC 13842:1995 (E) %O/IEC 10.6.1 Materials 10.6.2 Mass 10.6.3 Edge distor

18、tion 10.6.4 Compliance 10.65 Shutter opening force 10.7 Drop test 11 Dimensional, mechanical and physical characteristics of the disk 11.1 General description of the disk 11.2 Reference axis and plane of the disk 11.3 Dimensions of the disk 11.3.1 Hub dimension 11.4 Mechanical characteristics 11.4.1

19、 Material 11.4.2 Mass 11.4.3 Moment of inertia 11.4.4 Imbalance 11.4.5 Axial deflection 11.4.6 Axial acceleration 11.4.7 Radial runout 11.4.8 Radial acceleration 11.4.9 Tilt 11.5 Optical characteristics 11.5.1 Index of refraction 11.5.2 Thickness 11.5.3 Birefringence 11.5.4 Reflectance 12 Interface

20、between cartridge and drive 12.1 Clamping method 12.2 Clamping force 12.3 Capture cylinder (see figure 13) 12.4 Disk position in the operating condition Section 3: Format of information 13 Track geometry 13.1 Track shape 13.2 Direction of track spiral 13.3 Track pitch 13.4 Logical track number 13.5

21、Physical track number 14 Track format 14.1 Physical track layout 14.2 Logical track layout 14.3 Radial alignment 14.4 Sector number 15 Sector format 15.1 Sector layout 15.2 Sector mark 17 17 17 18 18 18 18 18 18 18 18 19 19 20 20 20 20 20 20 21 21 21 21 21 21 21 22 22 22 22 22 37 37 37 37 37 37 37 3

22、7 37 38 38 38 38 38 39 iv ISO/IEC ISOAEC 13842:1995 (E) 15.3 VFO fields 15.4 Address Mark (AM) 15.5 ID fields 15.6 Postamble (PA) 15.7 Gap 15.8 Auto Laser Power Control (ALPC) 15.9 Sync 15.10 Data field 40 41 41 41 42 42 42 42 15.10.1 User data bytes 15.10.2 CRC and ECC bytes 15.10.3 Bytes for contr

23、ol information (DMP) 15.10.4 Last bytes of the data field of the 512-byte sector format 15.10.5 Resync bytes 15.11 Buffer field 43 43 43 43 43 16 Recording code 17 Formatted Zone 17.1 General description of the Formatted Zone 17.2 Division of the Formatted Zone 43 44 45 45 45 17.2.1 Lead-in Zone 46

24、17.2.2 Manufacturer Zones 46 17.2.3 User Zone 47 17.2.4 Reflective Zone 47 17.2.5 Control Track Zones 47 17.3 Control Track PEP Zone 17.3.1 Recording in the PEP Zone 17.3.2 Format of the tracks of the PEP Zone 17.4 Control Track SFP Zones 17.4.1 Duplicate of the PEP information 17.4.2 Media informat

25、ion 17.4.3 System Information 18 Layout of the User Zone 18.1 General description of the User Zone 18.2 Divisions of the User a- .,-.z. “-1m4_1_*_ _ _.i.Lm.x_ ._ ISWIEC 13842:1995 tE) ISO/IEC 303.3 Timing jitter 31 Data interchange requirements 31.1 Tracking 31.2 User-written data 31.3 Embossed data

26、 31.4 Quality of disk Annexes A - Air cleanliness class 100 000 B - Edge distortion test C - Compliance test D - Test method for measuring the adsorbent force of the hub E - CRC for ID fields F - Interleave, CRC, ECC, Resync for the data field G - Determination of Resync pattern H - Read Channel for

27、 measuring C/N and jiner J - Timing jitter measuring procedure K - Definition of write pulse shape L - Measurement of figure of merit M - Implementation Independent Mark Quality Determination (IIMQD) for the interchange of recorded media N - Requirements for interchange P - Office environment Q - De

28、rivation of the operating climatic environment R - Transportation S - Sector retirement guidelines T - Track deviation measurement U - Values to be implemented in existing and future standards V - Guidelines for the use of Type WO ODCs 89 89. 89 89 89 89 $0 91 92 94 96 97 103 108 109 110 111 112 113

29、 115 116 120 121 122 126 127 . . . VIII Foreword (This foreword is not part of American National Standard ANSI/ISO/IEC 13842-1995. This document is identical to ISO/IEC 13842: 1995 and the following four paragraphs are the original fore- word as it appeared in that document.) IS0 (the International

30、Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of IS0 or IEC participate in the development of International Standards through technical committees established by th

31、e respective organization to deal with particular fields of technical activity. IS0 and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with IS0 and IEC, also take part in the work. In the field of in

32、formation technology, IS0 and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopt- ed by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75% of the nati

33、onal bodies casting a vote. International Standard ISO/IEC 13842 was prepared by Joint Technical Committee ISO/IEC JTC 1, information technology, Subcommittee SC23, Optical disk cartridges for information interchange. Annexes A to N form an integral part of this International Standard. Annexes P to

34、V are for information only. Requests for interpretation, suggestions for improvement or addenda, or defect reports are welcome. They should be sent to the X3 Secretariat, Information Technology Industry Council, 1250 Eye Street, NW, Suite 200, Washington, DC 200053922. This standard was processed an

35、d approved for submittal to ANSI by Accredited Standards Committee on Information Technology, X3. Committee approval of the standard does not necessarily imply that all committee members voted for its approval. At the time it approved this standard, the X3 Committee had the following members: James

36、D. Converse, Chair Donald C. Loughry, Vice-Chair Kate McMillan, Secretary Organization Represented Name of Representative AMP, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Edward Kelly Ben Ben

37、nett (Alt.) Apple Computer, Inc. . . . . . . . . . . . . . . . . . . . . . . . _. David K. Michael Jerry Kellenbenz (Alt.) AT - the environments in which the cartridges are to be operated and stored; - the mechanical, physical and dimensional characteristics of the cartridge, so as to provide mechan

38、ical interchangeability between data processing systems; - the format of the information on the disk, both embossed and user-written, including the physical disposition of the tracks and sectors, the error correction codes, the modulation methods used; - the characteristics of the embossed informati

39、on on the disk; - the magneto-optical characteristics of the disk, enabling processing systems to write data onto the disk; - the minimum quality of user-written data on the disk, enabling data processing systems to read data from the disk. This International Standard provides for interchange betwee

40、n optical disk drives. Together with a Standard for volume and file structure it provides for full data interchange between data processing systems. 2 Conformance 2.1 Optical Disk Cartridge (ODC) An ODC claiming conformance with this International Standard shall specify the Type of its two sides. It

41、 shall be in conformance if it meets all mandatory requirements specified herein for those Types of sides. 2.2 Generating system A claim of conformance with this International Standard shall specify which of Types R/W, R/W-R, P-ROM, P-ROM-R, O- ROM, O-ROM-R, WO, WO-R, and B is(are) supported. A syst

42、em generating an ODC for interchange shall be entitled to claim conformance with this International Standard if it meets the mandatory requirements of this Standard for the Type(s) supported. 2.3 Receiving system A claim of conformance with this International Standard shall specify which Type(s) of

43、side(s) is(are) supported. A system receiving an ODC for interchange shall be entitled to claim conformance with this International Standard if it is able to handle any recording made on the cartridge according to 2.1 on the Types specified. 2.4 Compatibility statement A claim of conformance by a ge

44、nerating or receiving system with this International Standard shall include a statement listing any other International Optical Disk Cartridge Standard supported. This statement shall specify the number of the Standard (s), including, where appropriate, the ODC Type(s), or the Types of side, and whe

45、ther support includes reading only or both reading and writing. 1 ISOhEC 13842:1995 (E) ISO/IEC 3 Normative reference The following standard contains provisions which. through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indica

46、ted was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standard indicated below Members of IEC and IS0 maintain registers of currently valid Interna

47、tional Standards. IEC 950: 1991, Safety of information technology equipment, including electrical business equipment. 4 Definitions For the purpose of this International Standard, the following definitions apply. 4.1 band: An annular area within the user zone on the disk having a constant clock freq

48、uency. 4.2 case: The housing for an optical disk, that protects the disk and facilitates disk interchange. 4.3 clamping zone: The annular part of the disk within which the clamping force is applied by the clamping device. 4.4 control track: A track containing the information on media parameters and

49、format necessary for writing, reading and erasing the remaining tracks on the optical disk. 4.5 Cyclic Redundancy Check (CRC): A method for detecting errors in data. 4.6 defect management: A method for handling the defective areas on the disk. 4.7 disk reference plane: A plane defined by the perfectly flat annular surface of an ideal spindle onto which the clamping zone of the disk is clamped, and which is normal to the axis of rotation. 4.8 entrance surface: The surface of the disk on to which the optical beam first impinges. 4.9 Error Correction Code (ECC)