ANSI INCITS ISO IEC 15404-2000 Information technology - Office machines - Minimum information to be included in specification sheets - Facsimile equipment《信息技术.办公设备.规格纸张中含有的最少信息.传真.pdf

1、INCITS/ISO/IEC 15404:20002008 (ISO/IEC 15404:2000, IDT) Information technology Office machines Minimum informationto be included in specification sheets Facsimile equipmentINCITS/ISO/IEC 15404:20002008(ISO/IEC 15404:2000, IDT)Copyright American National Standards Institute Provided by IHS under lice

2、nse with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-INCITS/ISO/IEC 15404:20002008 ii ITIC 2008 All rights reserved PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed

3、but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in thi

4、s area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for

5、use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. Adopted by INCITS (InterNational Committee for Information Technology Standards) as an American National Standard. Date of ANSI Approval: 6/18/200

6、8 Published by American National Standards Institute, 25 West 43rd Street, New York, New York 10036 Copyright 2008 by Information Technology Industry Council (ITI). All rights reserved. These materials are subject to copyright claims of International Standardization Organization (ISO), International

7、 Electrotechnical Commission (IEC), American National Standards Institute (ANSI), and Information Technology Industry Council (ITI). Not for resale. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of ITI. All r

8、equests pertaining to this standard should be submitted to ITI, 1250 Eye Street NW, Washington, DC 20005. Printed in the United States of America Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without lice

9、nse from IHS-,-,-INCITS/ISO/IEC 15404:20002008 ITIC 2008 All rights reserved iii Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of IS

10、O or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organization

11、s, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. In the field of information technology, ISO and IEC have established a joint technical committee, I

12、SO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the

13、 elements of this International Standard may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. International Standard ISO/IEC 15404 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC

14、 28, Office equipment. Annex A of this International Standard is for information only. Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright American National Standards Inst

15、itute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-AMERICAN NATIONAL STANDARD INCITS/ISO/IEC 15404:20002008 ITIC 2008 All rights reserved 1 Information technology Office machines Minimum information to be included in speci

16、fication sheets Facsimile equipment 1 Scope This International Standard is intended to facilitate the users in selecting facsimile equipment which meets their requirements. This International Standard specifies the minimum information that shall be included in the specification sheets of facsimile e

17、quipment so that users may compare the characteristics of different machines. This International Standard applies to facsimile equipment that could be operated in an office environment. Facsimile equipment requiring specially equipped rooms or specially instructed operators are not considered in thi

18、s International Standard. Facsimile equipment is assigned to group 3 and 4 depending on technical capabilities and is classified according to paper handling, scanning, recording and resolution. 2 Normative references The following normative documents contain provisions which, through reference in th

19、is text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the mo

20、st recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 554:1976, Standard atmospheres for conditioning and/or te

21、sting Specifications. ISO 7779:1999, Acoustics Measurement of airborne noise emitted by information technology and telecommunications equipment. ISO 9295:1988, Acoustics Measurement of high-frequency noise emitted by computer and business equipment. ISO 9296:1988, Acoustics Declared noise emission v

22、alues of computer and business equipment. IEC 60950:1999, Safety of information technology equipment. CISPR Pub.22, Limits and methods of measurement of radio interference characteristics of information technology equipment. 3 Conformance In order to comply with this International Standard, specific

23、ation sheets shall contain, in the order shown, all items listed in clause 4 which are relevant to the machine being described. Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-I

24、NCITS/ISO/IEC 15404:20002008 2 ITIC 2008 All rights reserved 4 Environmental conditions Unless otherwise specified, all tests and measurements shall be conducted at the following conditions: temperature: 18 C to 25 C relative humidity: 30 % to 70 % voltage: rated input voltage frequency: rated frequ

25、ency paper size: A4 paper weight: 60 g/m2 to 90 g/m2 Whenever a capacity is given in sheets, the reference paper weight shall be specified. When A4 paper size is specified, the size most commonly used in the country can be used, both for the test page and the copies. This shall be indicated in the s

26、pecification sheet. When weight of paper (g/m2) is given, it is assumed that the paper has been conditioned in the standard atmosphere defined in ISO 554 (temperature 20 C 2 C; relative humidity 65 % 5 %). Copyright American National Standards Institute Provided by IHS under license with ANSI Not fo

27、r ResaleNo reproduction or networking permitted without license from IHS-,-,-INCITS/ISO/IEC 15404:20002008 ITIC 2008 All rights reserved 3 5 Information to be included in the specification sheets Table 1 defines, for each parameter, the number, the name of the parameter and a short description of th

28、e entry. Table 1 Parameter Description of the entry remarks and examples 1 General data 1.1 Machine name, model and/or model number Product name, model number 1.2 Type States if the machine is portable, desk-top, floor-standing (console), modular, multifunction 1.3 Approval number Number from govern

29、mental or other authorities 1.3.1 Registration number 1.3.2 Certificate 1.3.3 Declaration of conformity 1.4 Equipment groups ITU-T Group 3 and/or 4 1.5 Equipment type Only transmitter or receiver or specialities 1.6 Operating modes 1.6.1 Basic operating modes Equipment for manual transmission Facsim

30、ile equipment on which a transmission can only be started with operator assistance Equipment for automatic transmission Facsimile equipment which allows one or more documents to be transmitted in succession without operator assistance (automatic dialling, last number redial, multi-address call, defe

31、rred transmission, polling) Equipment for manual reception Facsimile equipment on which a reception can only be started with operator assistance Equipment for automatic reception Facsimile equipment which allows one or more received copies to be received without operator assistance 1.6.2 Equipment f

32、or additional operating mode Equipment for staggered transmission Facsimile equipment for transmitting messages at a specified time Equipment for multi-address calling Facsimile equipment for transmitting the same document to several recipients in parallel or in succession Equipment for operation in

33、 memory mode Facsimile equipment for transmitting from or receiving to a memory Facsimile equipment with polling Facsimile equipment with polling (triggering mode): receiver triggers transmission. Facsimile equipment with polling (executive mode): transmission is made available for polling Equipment

34、 with error correction mode Facsimile equipment with a transmission procedure which detects any faulty areas between compatible transmitters and receivers and retransmits document Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or

35、 networking permitted without license from IHS-,-,-INCITS/ISO/IEC 15404:20002008 4 ITIC 2008 All rights reserved Table 1 (continued) Parameter Description of the entry remarks and examples 1.7 Transmission With telephone-network or other 1.8 Line connection Direct or other 1.8.1 Length of connection

36、 cord Definition in m 1.8.2 Connector type 1.9 Input sensitivity Definition in dB, dBm, dBV etc. 2 Transmitter, Scanner 2.1 Type Flat bed or other 2.2 Resolution In pels/mm (metric resolution) Definition in pels per 25,4 mm (inch-based resolution) 2.2.1 Highest resolution In pels/mm (metric resoluti

37、on) Definition in pels per 25,4 mm (inch-based resolution) 2.2.2 Resolution during transmission In pels/mm (metric resolution) Definition in pels per 25,4 mm (inch-based resolution) 2.3 Document to be transmitted Paper Min. and max. size Min./Max. in g/m2 Equipment with automatic paper feed for rece

38、ived copy from paper roll Facsimile equipment on which the paper for the received copy is fed in automatically from a paper roll 2.4 Scanning characteristics 2.4.1 - 2.4.3 Halftone, multicolour, full colour 2.5 Recognition of colours 2.5.1 tending to black 2.5.2 tending to white 2.6 Reduction Descri

39、ption of possibilities 3 Receiver, Printer 3.1 Paper feeding mode 3.2 Printing technology 3.3 Resolution 3.3.1 Highest resolution In pels/mm (metric resolution) In pels per 25,4 mm (inch-based resolution) 3.3.2 Receiving resolution In pels/mm (metric resolution) In pels per 25,4 mm (inch-based resol

40、ution) 3.4 Paper specification In this standard, “paper“ means any kind of printing matter suitable for documents to be transmitted and for received copies. Paper format 3.4.1 Receiving paper In g/m2 3.4.2 Paper supply 3.4.3 Roll width 3.4.4 Writability Definition of kind 3.4.5 Storage characteristi

41、cs Description of environment Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-INCITS/ISO/IEC 15404:20002008 ITIC 2008 All rights reserved 5 Table 1 (continued) Parameter Descrip

42、tion of the entry remarks and examples 3.5 Kind of paper Description of environment 3.6 Further consumable supplies 4 Transmitting time 4.1 Transmitting time for group 3 Equipment transmitted with time of connection 4.1.1 Minimum scan line time For receiving 4.1.2 Minimum scan line time For transmit

43、ting 4.2 Transmitting time for group 4 5 Equipment size, weight, installation and operating conditions 5.1 Dimensions Dimensions of the machine 5.2 Installation condition Space requirements 5.3 Environmental conditions Minimum and maximum ambient temperature and related range of relative humidity 6

44、Power source 6.1 Rated voltage Expressed in volts 6.2 Power consumption Average power consumption per hour in kilowatts 6.3 Frequency range Expressed in Hertz 6.4 Power consumption Net dependent or Net independent 6.5 Power supply Length of the main power cord 6.6 Line isolation Normal, other 6.7 Sa

45、fety class Line to earth of the supply class or class II 6.8 Safety regulation Applicable standards 6.8.1 Standards National and international standards 6.8.2 Safety data signs 6.9 Manufacturers 7 Electromagnetic capability (EMC) 7.1 Requirements 7.2 Safety data sign 8 Emission 8.1 Acoustical noise

46、Measure according to ISO 7779 and ISO 9295. Declare according to ISO 9296. Specify for basic and maximum configuration 8.2 Heat emission The heat emission per hour shall be indicated in kW, for all conditions specified under 6.2 Power consumption kW heat emission per hour = 3 600 8.3 Other emission

47、Description 8.4 Consumable supplies Consumables and packaging Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-INCITS/ISO/IEC 15404:20002008 6 ITIC 2008 All rights reserved Table

48、 1 (continued) Parameter Description of the entry remarks and examples 8.5 Optional equipment Peripheral equipment that changes the functionality of the machine (e.g. a sorter, a document handler, a 35 mm slide projector, a fanfold paper feeder) 8.6 Accessory equipment Peripheral equipment that does not change the functionality of the machine (e.g. paper cabinet) 8.7 Other An entry category for the supplier to highlight features or functionality that does not fit in any of the previous listed parameters Remote diagnostic capa