ANSI INCITS ISO IEC 29109-6-2011 Information technology - Conformance testing methodology for biometric data interchange formats defined in ISO IEC 19794 - Part 6 Iris image data.pdf

1、 INCITS/ISO/IEC 29109-6:2011 2013 ISO/IEC 29109-6:2011 Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 6: Iris image data INCITS/ISO/IEC 29109-6:2011 2013 PDF disclaimer This PDF file may contain embedded typefaces. In accor

2、dance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes li

3、censing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for print

4、ing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. Adopted by INCITS (InterNational Committee for Information Technology Stand

5、ards) as an American National Standard. Date of ANSI Approval: 2/25/2013 Published by American National Standards Institute, 25 West 43rd Street, New York, New York 10036 Copyright 2013 by Information Technology Industry Council (ITI). All rights reserved. These materials are subject to copyright cl

6、aims of International Standardization Organization (ISO), International Electrotechnical Commission (IEC), American National Standards Institute (ANSI), and Information Technology Industry Council (ITI). Not for resale. No part of this publication may be reproduced in any form, including an electron

7、ic retrieval system, without the prior written permission of ITI. All requests pertaining to this standard should be submitted to ITI, 1250 Eye Street NW, Washington, DC 20005. Printed in the United States of America ii ITIC 2013 All rights reserved ISO/IEC 29109-6:2011(E) ISO/IEC 2011 All rights re

8、served iiiForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards thro

9、ugh technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also

10、 take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prep

11、are International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility t

12、hat some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 29109-6 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 37, Biometrics. ISO

13、/IEC 29109 consists of the following parts, under the general title Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794: Part 1: Generalized conformance testing methodology Part 2: Finger minutiae data Part 4: Finger image data Part

14、5: Face image data Part 6: Iris image data Part 7: Signature/sign time series data Part 8: Finger pattern skeletal data Part 9: Vascular image data Part 10: Hand geometry silhouette data Finger pattern spectral data, signature/sign processed dynamic data, voice data, and DNA data will form the subje

15、cts of future parts. ISO/IEC 29109-6:2011(E) iv ISO/IEC 2011 All rights reservedIntroduction ISO/IEC 19794-6:2005 specifies a data record interchange format for recording, storing, and transmitting one or more iris images within a Common Biometric Exchange Formats Framework (CBEFF) data structure. E

16、ach image is accompanied by image-specific metadata contained in a header record. This part of ISO/IEC 29109 establishes tests for checking the correctness of the binary record. The objective of ISO/IEC 19794-6:2005 cannot be completely achieved until biometric products can be tested to determine wh

17、ether they conform to those specifications. Conforming implementations are a necessary prerequisite for achieving interoperability among implementations; therefore there is a need for a standardized conformance testing methodology, test assertions, and test procedures as applicable to specific modal

18、ities addressed by each part of ISO/IEC 19794. The test assertions will cover as much as practical of the ISO/IEC 19794-6:2005 requirements (covering the most critical features), so that the conformity results produced by the test suites will reflect the real degree of conformity of the implementati

19、ons to ISO/IEC 19794-6:2005 data interchange format records. This is the motivation for the development of this conformance testing methodology. This part of ISO/IEC 29109 supports those applications that require use of iris image data according to ISO/IEC 19794-6:2005. It defines a testing methodol

20、ogy to assure conformance of a vendors application or service to the base ISO/IEC 19794-6:2005 specification. Thus, this part of ISO/IEC 29109 is intended to: establish elements of the conformance testing met hodology framework that are specific to the iris image-based data record requirements of IS

21、O/IEC 19794-6:2005 conformance testing, define requirements and guidelines for specifying confor mance test suites and related test methods for measuring conformity of products and services to the iris image data record requirements of ISO/IEC 19794-6:2005, and define testing and reporting procedure

22、s to be follo wed before, during, and after conformance testing. This part of ISO/IEC 29109 is applicable to the development and use of conformity test method specifications, conformity test suites for ISO/IEC 19794-6:2005 records, and conformance testing programs for ISO/IEC 19794-6:2005 conformant

23、 products. It is intended primarily for use by testing organizations, but may be applied by developers and users of test method specifications and test method implementations. INTERNATIONAL STANDARD ISO/IEC 29109-6:2011(E) ISO/IEC 2011 All rights reserved 1Information technology Conformance testing

24、methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 6: Iris image data 1 Scope This part of ISO/IEC 29109 specifies elements of conformance testing methodology, test assertions, and test procedures as applicable to ISO/IEC 19794-6:2005. This part of ISO/IEC 29109 establi

25、shes test assertions of the structure of the iris im age data format as specified in ISO/IEC 19794-6:2005 (Type A Level 1 as defined in ISO/IEC 29109-1:2009), test assertions of internal consistency by checking the types of values that may be contained within each field (Type A Level 2 as defined in

26、 ISO/IEC 29109-1:2009). This part of ISO/IEC 29109 does not establish tests of conformance of CBEFF structures required by ISO/IEC 19794-6:2005, semantic assertions (Type A Level 3 as defined in ISO/IEC 29109-1:2009), other characteristics of bi ometric products or other types of testing of biometri

27、c products (e.g. acceptance, performance, robustness, security), tests of conformance of systems that do not produce ISO/IEC 19794-6:2005 records. 2 Conformance Biometric data interchange format Conformance Test Suites (CTS) conform to this part of ISO/IEC 29109 if they satisfy all of the normative

28、requirements related to Clause 6 for one of the subformats defined in the base standard. Specifically, they shall use the test methodology specified in Clauses 6, 7 and 8 of ISO/IEC 29109-1:2009, and all Level 1 and Level 2 tests shall use the assertions defined in Table 2 or Table 3 of Clause 6 in

29、this part of ISO/IEC 29109. Implementations of ISO/IEC 19794-6:2005 tested according to the methodology specified shall be able to claim conformance only to those Biometric Data Record (BDR) requirements specified in ISO/IEC 19794-6:2005 that are tested by the test methods established by this method

30、ology. ISO/IEC 29109-6:2011(E) 2 ISO/IEC 2011 All rights reservedImplementations of ISO/IEC 19794-2:2005 do not necessarily need to conform to all possible aspects of ISO/IEC 19794-6:2005, but only to those ISO/IEC 19794-6:2005 requirements that are claimed to be supported by the implementation in a

31、n Implementation Conformance Statement, filled out in accordance with Clause 8 of ISO/IEC 29109-1:2009 and Table 1 of Clause 6 in this part of ISO/IEC 29109. NOTE See that Level 3 and higher are not tested. 3 Normative references The following referenced documents are indispensable for the applicati

32、on of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 19794-2:2005, Information technology Biometric data interchange formats Part 2: Finger minutiae data ISO/IEC 19

33、794-6:2005, Information technology Biometric data interchange formats Part 6: Iris image data ISO/IEC 29109-1:2009, Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 1: Generalized conformance testing methodology 4 Terms and d

34、efinitions For the purposes of this document, the terms and definitions given in ISO/IEC 29109-1:2009 apply. 5 Symbols and abbreviated terms For the purposes of this part of ISO/IEC 29109, the symbols and abbreviated terms given in ISO/IEC 29109-1 apply. 6 Conformance testing methodology 6.1 General

35、 The testing methodology specified in Clauses 6, 7 and 8 of ISO/IEC 29109-1:2009 shall apply. The content of the tables below is based on the conformance testing methodology outlined in ISO/IEC 29109-1 and shall only be used in the context of that testing methodology. 6.2 Table of requirements in th

36、e base standard The normative requirements of ISO/IEC 19794-6:2005 are listed in Table 1. The supplier of the IUT can explain which optional components of the standard are supported and the testing laboratory can note the results of the test. ISO/IEC 29109-6:2011(E) ISO/IEC 2011 All rights reserved

37、3Table 1 Requirements of the Base Standard, ISO/IEC 19794-6:2005. Rectilinear (R) and polar (P) subformats. Requirement ID Ref. in base Std. Requirement summary Level Status Subformat Applicabiliity R P IUT Support Supported range Test result R-01 6.5.1 The Iris Record shall begin with the three ASC

38、II characters “IIR” followed by a zero byte as a NULL string terminator 1 M Y Y R-02 6.5.1 Test that Format Identifier is a big-endian encoded value 1 M Y Y R-03 6.5.1 The version number shall consist of three ASCII numerals followed by a zero byte as a NULL string terminator. The first and second c

39、haracter will represent the major revision number and the third character will represent the minor revision number. The version number of this specification shall be 0x30313000; “010” Version 1 revision 0. 1 M Y Y R-04 6.5.1 Test that version number is a big-endian encoded value 1 M Y Y R-05 6.5.1 T

40、he length in bytes for the entire record shall be recorded here. 1 M Y Y R-06 6.5.1 This count shall match the number of total bytes read. 2 M Y Y R-07 6.5.1 This count shall match the sum of the lengths of the records biometric subtypes and images. 2 M Y Y R-08 6.5.1 The capture device type ID shal

41、l be recorded in twelve bits. 1 M Y Y R-09 6.5.2 The total number of iris views shall be recorded in bytes 2-3. 1 M Y Y R-10 6.5.2 The total number of iris views shall match the number of views contained in the record. 2 M Y Y R-11 6.5.1 The record header length in bytes shall be 45. 1 M Y Y R-12 6.

42、5.1 The image property bit-field shall contain a valid value. 1 M Y Y R-13 6.3.2.5, 6.5.1 These two bits shall encode whether the images in the record are horizontally flipped. 1 M Y Y R-14 6.3.2.5, 6.5.1 These two bits shall encode whether the images in the record are vertically flipped. 1 M Y Y R-

43、15 6.3.2.5 6.5.1 These two bits shall encode the scan type for the images in this record. 1 M Y N R-16 6.3.2.4 6.5.1 This bit shall encode whether iris occlusions are embedded in the polar images of this record. 1 M N Y R-17 6.3.2.4 6.5.1 This bit shall indicate whether occlusions are marked using t

44、he lowest or the highest possible gray value. 1 M N Y R-18 6.3.2.2, 6.3.2.3 6.5.1 This bit shall encode whether the inner and outer iris boundaries were extracted and used to create the polar images in this record (segmented polar image). 1 M N Y R-19 6.5.1 This field shall contain the expected iris

45、 diameter if specified. 1 M Y N R-20 6.5.1 This field shall encode the image format and compression. 1 M Y Y R-21 6.2.2, 6.2.3, 6.2.4 Start markers shall be present at the beginning of each data blob of the record unless the image format is raw. 2 M Y Y R-22 6.5.1 This field shall specify the width

46、of the images in this record if the image format is raw. 1 M Y Y R-23 6.5.1 This field shall specify the height of the images in this record if the image format is raw. 1 M Y Y R-24 6.5.1 This field shall specify the pixel depth in bits per colour channel. 1 M Y Y R-25 6.5.1, 6.3.2.7 This field shal

47、l indicate whether the standard polar transformation described in the base standard was used to create the polar images in this record. 1 M N Y R-26 6.5.1 This field shall contain the Device Unique Identifier. 1 M Y Y R-27 6.5.2 This field shall encode the biometric subtype (left, right or undefined

48、) 1 M Y Y R-28 6.5.2 This field shall state the number of images for the biometric subtype. 1 M Y Y ISO/IEC 29109-6:2011(E) 4 ISO/IEC 2011 All rights reservedTable 1 (continued) Requirement ID Ref. in base Std. Requirement summary Level Status Subformat Applicabiliity R P IUT Support Supported range

49、 Test result R-29 6.5.2 The actual number of images found for this biometric subtype shall match the number in the biometric subtype header. 2 M Y Y R-30 6.5.3 This field shall contain the counter of the current image within the biometric subtype. 1 M Y Y R-31 6.5.3 It shall be in the range of valid counter values. 2 M Y Y R-32 6.5.3 This field shall contain the quality value of the