ANSI INCITS303-1998 Information Technology - Fibre Channel - Physical and Signalling Interface-3 (FC-PH-3)《信息技术.光纤信道.物理和信令接口.3(FC-PH-3)》.pdf

1、ANSI INCITS 303-1998 (R2003)(formerly ANSI X3.303-1998)for Information Technology Fibre Channel Physical and Signalling Interface-3 (FC-PH-3)Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license fr

2、om IHS-,-,-Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AbstractThis standard describes the enhancement to the ANSI X3.230, Fibre Channel Physical and Signalling In-terface (F

3、C-PH) and to the ANSI X3.297, Fibre Channel Physical and Signalling Interface - 2 (FC-PH-2)and is an addendum to both these documents.American National Standardfor Information Technology Fibre Channel Physical and Signalling Interface-3 (FC-PH-3)ANSIX3.303-1998SecretariatInformation Technology Indus

4、try CouncilApproved April 3, 1998American National Standards Institute, Inc.Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Approval of an American National Standard requires ver

5、ification by ANSI thatthe requirements for due process, consensus, and other criteria for approvalhave been met by the standards developer.Consensus is established when, in the judgement of the ANSI Board ofStandards Review, substantial agreement has been reached by directly andmaterially affected i

6、nterests. Substantial agreement means much more thana simple majority, but not necessarily unanimity. Consensus requires that allviews and objections be considered, and that a concerted effort be madetowards their resolution.The use of American National Standards is completely voluntary; theirexiste

7、nce does not in any respect preclude anyone, whether he has approvedthe standards or not, from manufacturing, marketing, purchasing, or usingproducts, processes, or procedures not conforming to the standards.The American National Standards Institute does not develop standards andwill in no circumsta

8、nces give interpretation on any American NationalStandard. Moreover, no person shall have the right or authority to issue aninterpretation of an American National Standard in the name of the AmericanNational Standards Institute. Requests for interpretations should beaddressed to the secretariat or s

9、ponsor whose name appears on the titlepage of this standard.CAUTION NOTICE:This American National Standard may be revised orwithdrawn at any time. The procedures of the American National StandardsInstitute require that action be taken periodically to reaffirm, revise, orwithdraw this standard. Purch

10、asers of American National Standards mayreceive current information on all standards by calling or writing the AmericanNational Standards Institute.American National StandardPublished byAmerican National Standards Institute, Inc.11 West 42nd Street, New York, NY 10036Copyright 1998 by Information Te

11、chnology Industry Council (ITI)All rights reserved.No part of this publication may be reproduced in anyform, in an electronic retrieval system or otherwise,without prior written permission of the publisher.Printed in the United States of Americainsert code hereCAUTION:The developers of this standard

12、 have requested that holders of patents that may berequired for the implementation of the standard disclose such patents to the publisher. However,neither the developers nor the publisher have undertaken a patent search in order to identifywhich, if any, patents may apply to this standard.As of the

13、date of publication of this standard and following calls for the identification of patentsthat may be required for the implementation of the standard, no such claims have been made. Nofurther patent search is conducted by the developer or publisher in respect to any standard it pro-cesses. No repres

14、entation is made or implied that licenses are not required to avoid infringementin the use of this standard. Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-iContentsPageForeword

15、.viIntroduction .ix1 Scope. 12 Normative references. 13Definitions and conventions . 24 Structure and concepts 35FC-0 functional characteristics. 46Optical fibre interface specification 47Electrical cable interface specification 58Optical fibre cable plant specification. 179Electrical cable plant sp

16、ecification . 1710 Optical interface connector specification 2011FC-1 8B/10B Transmission Code 2012FC-1 receiver and transmitter description 2013 Loopback mode 2014 Diagnostic mode 2015Transmitter safety 2016Ordered sets 2017 Frame formats 2018Frame_Header. 2119Optional headers 2720 Data frames and

17、responses. 3021Link Services 3122Classes of Service . 4023Login and Service Parameters 4224Exchange, Sequence, and sequence count management. 5625Association Header management and usage 5826 Flow control management 5827Segmentation and reassembly. 5828 Connection management. 5829Error detection and

18、recovery 6230Hunt Group. 6331 Multicast. 6332Aliases 66Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-iiPage33 Dedicated Simplex . 6634 Class 4 - Fractional 6635Camp-On 6636 Sta

19、cked Connect Request . 6637Buffered Class 1 Service 6638Data Compression . 6639Clock synchronization service 6740Data Encryption 73Tables10FC-0 physical links for electrical cable classes . 511Eye diagram mask at point-S 1112Eye diagram mask at point-R9. 1213Optional inter-enclosure contact uses . 1

20、514LV-style cable plant . 1715TV-style cable plant. 1716MI-style cable plant 1817TP-style cable plant. 1918TW-style cable plant 1933Well-known Address identifiers . 2136Type codes - FC-4 (Device_Data and Link_Data). 2137(Page 1 of 2) - F_CTL field 2236CData encryption status 2440DF_CTL bit definitio

21、n 25160Priority/Preemption enabled 25161Priority/Preemption not enabled 2541NAA identifiers 2845Association_Header Validity bits (Bits 63-56). 2953P_BSY Reason Codes 3055P_RJT or F_RJT Reason Codes. 3057Basic Link Service Commands 3161Extended Link Service Commands . 32162RTV Payload . 34163RTV Acce

22、pt Payload . 3491LS_RJT reason code explanation 35164RNC/ACC Payload 36Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-iiiPage165Capability Entry 37166Document Identifiers 3894Re

23、sponses to FLOGI frame (S_ID = 0 or 0000yy) - Fabric Login 4398N_Port Common Service Parameter Applicability . 4599FC-PH-3 Version . 46101N_Port Class Service Parameter Applicability. 49103Exchange Status Block 57104Sequence Status Block 57111AResponses to Preemption Requests. 61167CSS_CC Payload 71

24、168CSS_CC Accept Payload 71169Data Character Translation 72170CSS_SC Payload 72171CSS_SC Accept Payload 73FiguresDocument relationship. x110Fabric Regions. 3111FC-4 Regions. 427Example inter-enclosure TxRx connection with 75Wunbalanced cable 7112Example of compliance point locations and TxRx connect

25、ions . 8113 Inter-enclosure transmitter compliance points . 9114 Inter-enclosure receiver compliance points . 9115 Intra-enclosure transmitter compliance points . 10116 Intra-enclosure receiver compliance points . 1028 Unbalanced transmitter equivalent test load 1029 Normalized eye diagram mask at p

26、oint-S 1130 Absolute eye diagram mask at point-S 1131 Eye diagram mask at point-R9 . 1232 Example inter-enclosure TxRx connection with 150W balanced cable 1333 Balanced transmitter equivalent test load 1334 Style-1 balanced connector receptacle pin locations. 1435 Style-2 plug and receptacle . 1436

27、Style-2 balanced connector receptacle pin locations. 15117 Intra-enclosure integral FC device connector 16Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ivPage118 Contact number

28、ing for integral FC device connector 1637 Balanced cable wiring 1947 Optional headers order 2748 IEEE Registered 2849 IEEE registered format 2852 Association_Header 2959 FLOGI, PLOGI, or ACC Payload. 4460 N_Port Common Service Parameters - Fabric Login 4661 N_Port Common Service Parameters - N_Port

29、Login. 4762 N_Port Class Service Parameters - Fabric Login 5062a N_Port Class Service Parameters - N_Port Login. 5167 F_Port Common Service Parameters - Fabric Login. 5367a F_Port Class Service Parameters - Fabric Login 5489a Class 6 Multicast Routing 6389b Class 3 Multicast Routing 65119 Clock Sync

30、hronization Model 67120 Real Time Loop Topology . 84121 Real Time Protocol Stack 85122 Failure Detect and Re-routing . 85123 TDM Window. 86124 FC-PH IEEE 48-bit identifier 99125 FC-PH IEEE 48-bit identifier example 99126 FC-PH IEEE extended identifier 100127 FC-PH IEEE extended identifier example 10

31、0128 FC-PH IEEE registered identifier. 101129 IEEE registered identifier example 101Index . 102AnnexesA No enhancements to X3.230-1994 (FC-PH) 74B No enhancements to X3.230-1994 (FC-PH) 74C No enhancements to X3.230-1994 (FC-PH) 74D No enhancements to X3.230-1994 (FC-PH) 74E No enhancements to X3.23

32、0-1994 (FC-PH) 74F Electrical cable interface implementation examples. 75G No enhancements to X3.230-1994 (FC-PH) 79Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-vPageH No enha

33、ncements to X3.230-1994 (FC-PH). 79I No enhancements to X3.230-1994 (FC-PH). 79J No enhancements to X3.230-1994 (FC-PH). 79K No enhancements to X3.230-1994 (FC-PH). 79L No enhancements to X3.230-1994 (FC-PH). 79M No enhancements to X3.230-1994 (FC-PH). 79N No enhancements to X3.230-1994 (FC-PH). 79O

34、 No enhancements to X3.230-1994 (FC-PH). 79P No enhancements to X3.230-1994 (FC-PH). 79Q No enhancements to X3.230-1994 (FC-PH). 80R No enhancements to X3.230-1994 (FC-PH). 80S FC-PH Service interface . 81T No enhancements to X3.230-1994 (FC-PH). 83U No enhancements to X3.230-1994 (FC-PH). 83V No en

35、hancements to X3.230-1994 (FC-PH). 83W No enhancements to X3.230-1994 (FC-PH). 83X No enhancements to X3.230-1994 (FC-PH). 83Y No enhancements to X3.230-1994 (FC-PH). 83Z No enhancements to X3.230-1994 (FC-PH). 83AA No enhancements to X3.230-1994 (FC-PH). 83BB No enhancements to X3.230-1994 (FC-PH).

36、 83CC A Real Time Loop Based Fibre Channel Topology 84DD Priority and Preemption 93EE Report Node Capabilities (RNC). 95FF Tutorial for IEEE Registered . 98Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted wit

37、hout license from IHS-,-,-viForeword (This foreword is not part of American National Standard X3.303-1998.)This Fibre Channel, Physical and Signalling Interface - 3 standard (FC-PH-3) de-scribes the enhancements to the ANSI X3.230 FC-PH and X3.297 FC-PH-2 and isan extension to both these documents.T

38、his standard was developed by Task Group X3T11 of Accredited Standards Com-mittee X3 during 1995-6. The standards approval process started in 1996. This stan-dard includes annexes, which are informative, and are not considered part of thestandard.This document is an extension to the FC-PH and FC-PH-

39、2 standards and follows thesame numbering scheme for clauses, subclauses, figures, and tables. Therefore, allclauses, subclauses, figures, and tables which are already defined in FC-PH or FC-PH-2 and are modified by FC-PH-3 have the same numbering as their original defini-tion in those documents. Th

40、e number of clauses, subclauses, figures, and tableswhich are unique to FC-PH-3 starts up from the last such item defined in FC-PH-2.For example, Figure 27 in Clause 7 appears in FC-PH, so it retains the same numberin FC-PH-3. However, Figure 110 in Clause 4 is unique to FC-PH-3, so it has the nextn

41、umber after the last figure in FC-PH-2.Requests for interpretation, suggestions for improvement or addenda, or defect re-ports are welcome. They should be sent to the National Committee for InformationTechnology (NCITS), 1250 Eye Street, NW, Suite 200, Washington, DC 20005.This standard was processe

42、d and approved for submittal to ANSI by NCITS. Com-mittee approval of the standard does not necessarily imply that all committee mem-bers voted for approval. At the time it approved this standard, NCITS had thefollowing members:Karen Higginbottom, Chair (Acting)Karen Higginbottom, Vice-ChairMonica V

43、ago, SecretaryOrganization Represented Name of RepresentativeAMP, IncJohn HillCharles Brill (Alt.)Apple Computer, IncDavid K. MichaelJerry Kellenbenz (Alt.)AT ANSI X3.254, FC-FP; FC-LE;FC-ATM; IPI-3 Disk revision; IPI-3 Tape revision and SCSI-FCP are FC-4 stan-dards.Copyright American National Stand

44、ards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-xFC-PH-3Fibre Channel Physical Document relationshipFC-ALArbitrated LoopFC-SWSwitch TopologyFC-FGFabric Generic requirementsand Signalling InterfaceFC-IGFibre Chan

45、nelImplementation GuideFC-LELinkFC-ATMMapping ofFC-SBMapping to Single ByteFC-FPMapping to HIPPICommand Code SetsFraming ProtocolEncapsulationATM/AAL5IPI-3 DiskRevision toIPI-3 TapeRevision toIPI-3 Disk Std.IPI-3 Tape Std.SCSI-FCPSCSI-3 FibreChannel ProtocolOtherFC upper-layerprotocolsFC-GSGeneric S

46、ervicesand Signalling Interface - 3 FC-PH (ANSI X3.230)Fibre Channel PhysicalFC-PH-2 (ANSI X3.297)Fibre Channel Physicaland Signalling Interface - 2Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without lic

47、ense from IHS-,-,-AMERICAN NATIONAL STANDARDANSI X3.303-19981American National Standard for Information Technology Fibre Channel Physical and Signalling Protocol - 3 (FC-PH-3)1 ScopeFC-PH-3 describes the enhancement to ANSIX3.230, FC-PH and to the ANSI X3.297, FC-PH-2 and is an addendum to the FC-PH

48、 andFC-PH-2 documents.This document is an extension to the FC-PHand FC-PH-2 standards and describes a set ofadvanced capabilities beyond both FC-PH andFC-PH-2 to support more advanced and spe-cialized applications. 2 Normative referencesThe following standards contain provisions which,through refere

49、nce in this text, constitute provi-sions of this standard. At the time of publication,the editions indicated were valid. All standardsare subject to revision, and parties to agreementsbased on this standard are encouraged to investi-gate the possibility of applying the most recenteditions of the standards listed below. Copies of the following documents can