ANSI INCITS476-2011 Information technology - SAS Protocol Layer (SPL)《信息技术.SAS协议层(SPL)》.pdf

1、American National StandardDeveloped byfor Information Technology SAS Protocol Layer (SPL)INCITS 476-2011INCITS 476-2011Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright

2、American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-INCITS 476-2011American National Standardfor Information Technology SAS Protocol Layer (SPL)SecretariatInformation Technology Industry Coun

3、cilApproved June 28, 2011American National Standards Institute, Inc.AbstractThis standard specifies three transport protocols used over the SAS interconnect specified in SAS-2.1: one to transport SCSI commands, another to transport Serial ATA commands to multiple SATA devices, and a third to support

4、 interface management. This standard is intended to be used in conjunction with SAS standards, SCSI command set standards, and ATA command set standards.Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted witho

5、ut license from IHS-,-,-Approval of an American National Standard requires review by ANSI that therequirements for due process, consensus, and other criteria for approval havebeen met by the standards developer.Consensus is established when, in the judgement of the ANSI Board ofStandards Review, sub

6、stantial agreement has been reached by directly andmaterially affected interests. Substantial agreement means much more thana simple majority, but not necessarily unanimity. Consensus requires that allviews and objections be considered, and that a concerted effort be madetowards their resolution.The

7、 use of American National Standards is completely voluntary; theirexistence does not in any respect preclude anyone, whether he has approvedthe standards or not, from manufacturing, marketing, purchasing, or usingproducts, processes, or procedures not conforming to the standards.The American Nationa

8、l Standards Institute does not develop standards andwill in no circumstances give an interpretation of any American NationalStandard. Moreover, no person shall have the right or authority to issue aninterpretation of an American National Standard in the name of the AmericanNational Standards Institu

9、te. Requests for interpretations should beaddressed to the secretariat or sponsor whose name appears on the titlepage of this standard.CAUTION NOTICE: This American National Standard may be revised orwithdrawn at any time. The procedures of the American National StandardsInstitute require that actio

10、n be taken periodically to reaffirm, revise, orwithdraw this standard. Purchasers of American National Standards mayreceive current information on all standards by calling or writing the AmericanNational Standards Institute.American National StandardPublished byAmerican National Standards Institute,

11、 Inc.25 West 43rd Street, New York, NY 10036Copyright 2011 by Information Technology Industry Council (ITI)All rights reserved.No part of this publication may be reproduced in anyform, in an electronic retrieval system or otherwise,without prior written permission of ITI, 1101 K Street NW, Suite 610

12、, Washington, DC 20005. Printed in the United States of AmericaCAUTION: The developers of this standard have requested that holders of patents that may be re-quired for the implementation of the standard disclose such patents to the publisher. However, nei-ther the developers nor the publisher have

13、undertaken a patent search in order to identify which, ifany, patents may apply to this standard. As of the date of publication of this standard, followingcalls for the identification of patents that may be required for the implementation of the standard,notice of one or more such claims has been re

14、ceived. By publication of this standard, no positionis taken with respect to the validity of this claim or of any rights in connection therewith. The knownpatent holder(s) has (have), however, filed a statement of willingness to grant a license underthese rights on reasonable and nondiscriminatory t

15、erms and conditions to applicants desiring to ob-tain such a license. Details may be obtained from the publisher. No further patent search is con-ducted by the developer or publisher in respect to any standard it processes. No representation ismade or implied that this is the only license that may b

16、e required to avoid infringement in the use ofthis standard.Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-iContentsPageForeword xxxiiIntroduction . xxxvi1 Scope. 12 Normative

17、references. 32.1 Normative references . 32.2 Approved references 32.3 .References under development 42.4 Other references. 43 Definitions, symbols, abbreviations, keywords, and conventions 53.1 Definitions. 53.2 Symbols and abbreviations 183.3 Keywords 213.4 Editorial conventions 213.5 Class diagram

18、 and object diagram conventions. 233.6 State machine conventions 273.6.1 State machine conventions overview 273.6.2 Transitions 283.6.3 Messages, requests, indications, confirmations, responses, and event notifications . 293.6.4 State machine counters, timers, and variables . 293.6.5 State machine a

19、rguments . 293.7 Bit and byte ordering 303.8 Notation for procedures and functions 304 General 324.1 Architecture 324.1.1 Architecture overview 324.1.2 Physical links and phys. 344.1.3 Logical links 384.1.4 Ports (narrow ports and wide ports) 384.1.5 Application clients and device servers 414.1.6 SA

20、S devices 424.1.7 Expander devices . 434.1.8 Service delivery subsystem 444.1.9 Domains 454.1.10 Expander device topologies 474.1.10.1 Expander device topology overview 474.1.10.2 Expander device topologies 474.1.11 Pathways 494.1.12 Connections 494.1.13 Broadcasts 514.2 Names and identifiers. 534.2

21、.1 Names and identifiers overview 534.2.2 NAA IEEE Registered format identifier . 544.2.3 NAA Locally Assigned format identifier. 554.2.4 SAS address . 564.2.5 Hashed SAS addresses 564.2.6 Device names and expander device SAS addresses . 574.2.7 Device name for SATA devices with world wide names . 5

22、74.2.8 Port names 574.2.9 Port identifiers and SAS port SAS addresses. 574.2.10 Phy identifiers . 584.3 State machines. 59Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-ii4.3.1

23、 State machine overview 594.3.2 Transmit data path 604.3.3 Receive data path . 654.3.4 State machines and SAS Device, SAS Port, and SAS Phy classes. 684.4 Resets 704.4.1 Reset overview . 704.4.2 Hard reset . 724.4.2.1 Hard reset overview 724.4.2.2 Additional hard reset processing by SAS ports .724.4

24、.2.3 Additional hard reset processing by expander ports . 724.5 I_T nexus loss 724.6 Expander device model 734.6.1 Expander device model overview . 734.6.2 Expander ports 744.6.3 Expander connection manager (ECM) 754.6.4 Expander connection router (ECR). 754.6.5 Broadcast propagation processor (BPP)

25、 764.6.6 Expander device interfaces. 764.6.6.1 Expander device interface overview 764.6.6.2 Expander device interfaces detail . 784.6.6.3 ECM interface 794.6.6.4 ECR interface 814.6.6.5 BPP interface 824.6.7 Expander device routing . 844.6.7.1 Routing attributes and routing methods 844.6.7.2 Expande

26、r device topology routing attribute restrictions. 854.6.7.3 Connection request routing . 854.6.7.4 Expander route table . 854.6.7.4.1 Expander route table overview 854.6.7.4.2 Phy-based expander route table 864.6.7.4.3 Expander-based expander route table 874.6.8 Expander device reduced functionality

27、 . 874.6.9 Broadcast (Expander) handling 884.7 Discover process 884.7.1 Discover process overview . 884.7.2 Starting the discover process (Broadcast (Change) handling) . 884.7.3 Discover process traversal 884.7.4 Discover process in a self-configuring expander device. 904.7.5 Enabling multiplexing 9

28、14.8 Configuration subprocess. 924.8.1 Configuration subprocess overview 924.8.2 Allowed expander device topologies. 924.8.3 Externally configurable expander device route table optimization 934.8.4 Externally configurable expander device expander route index order 944.9 Zoning. 1014.9.1 Zoning overv

29、iew 1014.9.2 Zoning expander device requirements 1054.9.3 Zoning operation . 1084.9.3.1 Zone phy information. 1084.9.3.2 Zone groups 1104.9.3.3 Zone permission table . 1104.9.3.4 Zoning expander route table . 1124.9.3.5 Source zone group and destination zone group determination. 1134.9.4 Zone phy in

30、formation and link reset sequences . 1134.9.5 Broadcast processing in a zoning expander device with zoning enabled. 1154.9.6 Zone configuration 1164.9.6.1 Zone configuration overview . 116Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reprodu

31、ction or networking permitted without license from IHS-,-,-iii4.9.6.2 Lock step . 1164.9.6.3 Load step. 1174.9.6.4 Activate step 1174.9.6.5 Unlock step 1184.9.6.6 Zone lock inactivity timer . 1194.9.6.7 Enable a zoning expander device . 1194.10 Phy power conditions . 1194.10.1 Low phy power conditio

32、ns. 1194.10.1.1 Low phy power conditions overview 1194.10.1.2 Active phy power condition 1204.10.1.3 Partial phy power condition . 1204.10.1.4 Slumber phy power condition 1204.10.1.5 End device low phy power conditions . 1204.10.1.6 Expander low phy power conditions 1214.10.2 SATA phy power conditio

33、ns 1214.11 SAS device and expander device power conditions. 1214.12 Phy test functions . 1224.12.1 Phy test functions overview 1224.12.2 Transmit pattern phy test function. 1224.13 Phy events 1225 Phy layer 1285.1 Phy layer overview . 1285.2 8b10b coding 1285.2.1 8b10b coding overview . 1285.2.2 8b1

34、0b coding notation conventions 1285.3 Character encoding and decoding 1295.3.1 Introduction . 1295.3.2 Bit transmission order . 1295.3.3 Character transmission order 1295.3.4 Frame transmission order . 1295.3.5 Running disparity (RD) 1305.3.6 Data characters. 1305.3.7 Control characters. 1365.3.8 En

35、coding characters in the transmitter . 1375.3.9 Decoding characters in the receiver . 1375.4 Dwords, primitives, data dwords, and invalid dwords. 1375.5 Bit order 1385.6 Out of band (OOB) signals . 1395.6.1 OOB signals overview. 1395.6.2 SP Transmission of OOB signals 1395.6.3 Receiver detection of

36、OOB signals . 1405.6.4 SATA port selection signal 1425.6.5 Phy power conditions 1435.7 Phy reset sequences 1435.7.1 Phy reset sequences overview . 1435.7.2 SATA phy reset sequence 1445.7.2.1 SATA OOB sequence . 1445.7.2.2 SATA speed negotiation sequence . 1455.7.3 SAS to SATA phy reset sequence 1455

37、.7.4 SAS to SAS phy reset sequence 1475.7.4.1 SAS OOB sequence 1475.7.4.2 SAS speed negotiation sequence . 1495.7.4.2.1 SAS speed negotiation sequence overview 1495.7.4.2.2 SAS speed negotiation sequence timing specifications 1495.7.4.2.3 Speed negotiation window (SNW) definitions 1515.7.4.2.3.1 SNW

38、 definitions overview . 151Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-iv5.7.4.2.3.2 SNW-1, SNW-2, and Final-SNW. 1515.7.4.2.3.3 SNW-3. 1525.7.4.2.3.4 Train-SNW 1575.7.4.2.4

39、 SAS speed negotiation sequence 1605.7.4.2.5 SAS speed negotiation sequence examples . 1615.7.4.3 Multiplexing sequence. 1685.7.5 Phy reset sequence after devices are attached 1695.8 Phy power condition sequences. 1705.8.1 Transitioning from the active phy power condition to a low phy power conditio

40、n . 1705.8.2 Transitioning from a low phy power condition to the active phy power condition . 1705.8.3 Events during low phy power condition. 1715.9 SP (phy layer) state machine . 1725.9.1 SP state machine overview. 1725.9.2 SP transmitter and receiver 1755.9.3 OOB sequence states. 1775.9.3.1 OOB se

41、quence states overview 1775.9.3.2 SP0:OOB_COMINIT state. 1785.9.3.2.1 State description 1785.9.3.2.2 Transition SP0:OOB_COMINIT to SP1:OOB_AwaitCOMX. 1795.9.3.2.3 Transition SP0:OOB_COMINIT to SP3:OOB_AwaitCOMINIT_Sent. 1795.9.3.2.4 Transition SP0:OOB_COMINIT to SP4:OOB_COMSAS. 1795.9.3.3 SP1:OOB_Aw

42、aitCOMX state 1795.9.3.3.1 State description 1795.9.3.3.2 Transition SP1:OOB_AwaitCOMX to SP0:OOB_COMINIT. 1795.9.3.3.3 Transition SP1:OOB_AwaitCOMX to SP4:OOB_COMSAS 1795.9.3.4 SP2:OOB_NoCOMSASTimeout state. 1795.9.3.4.1 State description 1795.9.3.4.2 Transition SP2:OOB_NoCOMSASTimeout to SP0:OOB_C

43、OMINIT . 1805.9.3.4.3 Transition SP2:OOB_NoCOMSASTimeout to SP4:OOB_COMSAS. 1805.9.3.5 SP3:OOB_AwaitCOMINIT_Sent state 1805.9.3.5.1 State description 1805.9.3.5.2 Transition SP3:OOB_AwaitCOMINIT_Sent to SP4:OOB_COMSAS 1805.9.3.6 SP4:OOB_COMSAS state 1805.9.3.6.1 State description 1805.9.3.6.2 Transi

44、tion SP4:OOB_COMSAS to SP5:OOB_AwaitCOMSAS_Sent 1805.9.3.6.3 Transition SP4:OOB_COMSAS to SP6:OOB_AwaitNoCOMSAS. 1805.9.3.6.4 Transition SP4:OOB_COMSAS to SP7:OOB_AwaitCOMSAS . 1815.9.3.7 SP5:OOB_AwaitCOMSAS_Sent state 1815.9.3.7.1 State description 1815.9.3.7.2 Transition SP5:OOB_AwaitCOMSAS_Sent t

45、o SP6:OOB_AwaitNoCOMSAS. 1815.9.3.8 SP6:OOB_AwaitNoCOMSAS state. 1815.9.3.8.1 State description 1815.9.3.8.2 Transition SP6:OOB_AwaitNoCOMSAS to SP0:OOB_COMINIT . 1815.9.3.8.3 Transition SP6:OOB_AwaitNoCOMSAS to SP8:SAS_Start 1815.9.3.9 SP7:OOB_AwaitCOMSAS state . 1815.9.3.9.1 State description 1815

46、.9.3.9.2 Transition SP7:OOB_AwaitCOMSAS to SP2:OOB_NoCOMSASTimeout 1815.9.3.9.3 Transition SP7:OOB_AwaitCOMSAS to SP6:OOB_AwaitNoCOMSAS 1815.9.3.9.4 Transition SP7:OOB_AwaitCOMSAS to SP16:SATA_COMWAKE. 1825.9.3.9.5 Transition SP7:OOB_AwaitCOMSAS to SP26:SATA _SpinupHold 1825.9.4 SAS speed negotiatio

47、n states. 1825.9.4.1 SAS speed negotiation states overview 1825.9.4.2 Negotiation idle 1825.9.4.3 SP8:SAS_Start state . 1845.9.4.3.1 State description 1845.9.4.3.2 Transition SP8:SAS_Start to SP0:OOB_COMINIT . 1855.9.4.3.3 Transition SP8:SAS_Start to SP1:OOB_AwaitCOMX . 185Copyright American Nationa

48、l Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-v5.9.4.3.4 Transition SP8:SAS_Start to SP9:SAS_WindowNotSupported 1855.9.4.3.5 Transition SP8:SAS_Start to SP10:SAS_AwaitALIGN 1855.9.4.3.6 Transition SP8:

49、SAS_Start to SP27:SAS_Settings 1855.9.4.4 SP9:SAS_WindowNotSupported state 1865.9.4.4.1 State description 1865.9.4.4.2 Transition SP9:SAS_WindowNotSupported to SP0:OOB_COMINIT 1865.9.4.4.3 Transition SP9:SAS_WindowNotSupported to SP14:SAS_Fail 1865.9.4.5 SP10:SAS_AwaitALIGN state . 1865.9.4.5.1 State description 1865.9.4.5.2 Transition SP10:SAS_AwaitALIGN to SP