ANSI ISO 19114-2003(R2008) Geographic information — Quality evaluation procedures《地理信息.质量评估程序》.pdf

1、Adopted by INCITS (InterNational Committee for Information Technology Standards) as an American National Standard.Date of ANSI Approval: 12/24/2003Published by American National Standards Institute,25 West 43rd Street, New York, New York 10036Copyright 2003 by Information Technology Industry Council

2、 (ITI).All rights reserved.These materials are subject to copyright claims of International Standardization Organization (ISO), InternationalElectrotechnical Commission (IEC), American National Standards Institute (ANSI), and Information Technology Industry Council(ITI). Not for resale. No part of t

3、his publication may be reproduced in any form, including an electronic retrieval system, withoutthe prior written permission of ITI. All requests pertaining to this standard should be submitted to ITI, 1250 Eye Street NW,Washington, DC 20005.Printed in the United States of AmericaReference numberISO

4、 19114:2003(E)ISO 2003INTERNATIONAL STANDARD ISO19114First edition2003-08-15Geographic information Quality evaluation procedures Information gographique Procdures dvaluation de la qualit Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduct

5、ion or networking permitted without license from IHS-,-,-ISO 19114:2003(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and i

6、nstalled on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software p

7、roducts used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is foun

8、d, please inform the Central Secretariat at the address given below. ISO 2003 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in

9、writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2003 All rights reservedCopyri

10、ght American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO 19114:2003(E) ISO 2003 All rights reserved iiiContents Page Foreword. v Introduction . vi 1 Scope 1 2 Conformance . 1 3 Normative re

11、ferences . 1 4 Terms and definitions. 1 5 Abbreviated terms. 2 6 Process for evaluating data quality 3 6.1 General. 3 6.2 Components of the process. 3 7 Data quality evaluation methods. 4 7.1 Classification of data quality evaluation methods 4 7.2 Direct evaluation methods . 5 7.3 Indirect evaluatio

12、n method 6 7.4 Data quality evaluation examples . 7 8 Reporting data quality evaluation information 7 8.1 Reporting as metadata . 7 8.2 Reporting in a quality evaluation report . 7 8.3 Reporting aggregated data quality result. 7 Annex A (normative) Abstract test suites 8 A.1 Introduction . 8 A.2 Qua

13、lity evaluation procedures 8 A.3 Evaluating data quality. 8 A.4 Reporting data quality 8 Annex B (informative) Uses of quality evaluation procedures 9 B.1 Introduction . 9 B.2 Development of a product specification or user requirements . 9 B.3 Quality control during dataset creation 9 B.4 Inspection

14、 for conformance to a product specification 9 B.5 Evaluation of dataset conformance to user requirements . 9 B.6 Quality control during dataset update 9 Annex C (informative) Applying quality evaluation procedures to dynamic datasets 10 C.1 Introduction . 10 C.2 Determining and reporting the quality

15、 of a dynamic dataset. 10 C.3 Establishing continuous quality evaluation procedures 10 C.4 Periodically re-establish the reference quality of the dataset 11 Annex D (informative) Examples of data quality measures . 12 D.1 Introduction . 12 D.2 Relationship of the data quality components 12 D.3 Examp

16、les of data quality completeness measures. 14 D.4 Examples of data quality logical consistency measures 15 D.5 Examples of data quality positional accuracy measures . 19 D.6 Examples of data quality temporal accuracy measures . 23 D.7 Examples of data quality thematic accuracy measures . 26 Annex E

17、(informative) Guidelines for sampling methods applied to geographic datasets 30 Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO 19114:2003(E) iv ISO 2003 All rights reservedE

18、.1 Introduction30 E.2 Lot and item .30 E.3 Sample size 30 E.4 Sampling strategies 31 E.5 Probability-based sampling .34 Annex F (informative) Example of testing for thematic accuracy and completeness .36 F.1 Introduction36 F.2 Quality evaluation process.36 F.3 Method for data quality evaluation36 F.

19、4 Inspection for quality 37 F.5 Determination of data quality results and conformance.38 F.6 Reporting quality results 39 Annex G (informative) Example of measurement and reporting of completeness and thematic accuracy .42 G.1 Introduction42 G.2 Dataset description .42 G.3 Evaluation of data quality

20、.47 G.4 Reporting quality results 50 Annex H (informative) Example of an aggregated data quality result.53 H.1 Introduction53 H.2 Dataset description .53 H.3 Universe of discourse.54 H.4 Dataset55 H.5 Aggregation of evaluation results and reporting.55 Annex I (normative) Reporting quality informatio

21、n in a quality evaluation report 57 I.1 Introduction57 I.2 Quality evaluation report components57 Annex J (informative) Aggregation of data quality results.61 J.1 Introduction61 J.2 100 % pass/fail.61 J.3 Weighted pass/fail.61 J.4 Subset of results sufficient for product purpose.62 J.5 Maximum/minim

22、um value.62 Bibliography63 Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO 19114:2003(E) ISO 2003 All rights reserved vForeword ISO (the International Organization for Standa

23、rdization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right t

24、o be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Sta

25、ndards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an In

26、ternational Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1911

27、4 was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics. Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO 19114:2003(E) vi ISO 2003 All rights reser

28、vedIntroduction For the purpose of evaluating the quality of a dataset, clearly defined procedures must be used in a consistent manner. This enables data producers to express how well their product meets the criteria set forth in its product specification and enables data users to establish the exte

29、nt to which a dataset meets their requirements. The quality of a dataset is described using two components: a quantitative component and a non-quantitative component. The objective of this International Standard is to provide guidelines for evaluation procedures of quantitative quality information f

30、or geographic data in accordance with the quality principles described in ISO 19113. It also offers guidance on reporting quality information. This International Standard recognizes that a data producer and a data user may view data quality from different perspectives. Conformance quality levels can

31、 be set using the data producers product specification or a data users data quality requirements. If the data user requires more data quality information than that provided by the data producer, the data user may follow the data producers data quality evaluation process flow to get the additional in

32、formation. In this case, the data user requirements are treated as a product specification for the purpose of using the data producer process flow. The quality evaluation procedures described in this International Standard, when applied in accordance with ISO 19113, provide a consistent and standard

33、 manner to determine and report the quality information in a dataset. Copyright American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-INTERNATIONAL STANDARD ISO 19114:2003(E) ISO 2003 All rights

34、 reserved 1Geographic information Quality evaluation procedures 1 Scope This International Standard provides a framework of procedures for determining and evaluating quality that is applicable to digital geographic datasets, consistent with the data quality principles defined in ISO 19113. It also e

35、stablishes a framework for evaluating and reporting data quality results, either as part of data quality metadata only, or also as a quality evaluation report. This International Standard is applicable to data producers when providing quality information on how well a dataset conforms to the product

36、 specification, and to data users attempting to determine whether or not the dataset contains data of sufficient quality to be fit for use in their particular applications. Although this International Standard is applicable to all types of digital geographic data, its principles can be extended to m

37、any other forms of geographic data such as maps, charts and textual documents. 2 Conformance This International Standard defines three classes of conformance: one for quality evaluation procedures, one for evaluating data quality, and one for reporting quality information. The abstract test suites f

38、or the three classes of conformance are given in Annex A. 3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (inc

39、luding any amendments) applies. ISO 19113:2002, Geographic information Quality principles ISO 19115:2003, Geographic information Metadata 4 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 19113 and ISO 19115 (some of which are repeated for convenience)

40、 and the following apply. 4.1 conformance quality level threshold value or set of threshold values for data quality results used to determine how well a dataset meets the criteria set forth in its product specification or user requirements 4.2 dataset identifiable collection of data ISO 19115 Copyri

41、ght American National Standards Institute Provided by IHS under license with ANSINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO 19114:2003(E) 2 ISO 2003 All rights reservedNOTE A dataset may be a smaller grouping of data which, though limited by some constrain

42、t such as spatial extent or feature type, is located physically within a larger dataset. For purposes of data quality evaluation, a dataset may be as small as a single feature or feature attribute contained within a larger dataset. 4.3 dataset series collection of datasets sharing the same product s

43、pecification ISO 19115 4.4 direct evaluation method method of evaluating the quality of a dataset based on inspection of the items within the dataset 4.5 full inspection inspection of every item in a dataset NOTE Full inspection is also known as 100 % inspection. 4.6 indirect evaluation method metho

44、d of evaluating the quality of a dataset based on external knowledge NOTE Examples of external knowledge are dataset lineage, such as production method or source data. 4.7 item that which can be individually described or considered ISO 2859-1 NOTE An item can be any part of a dataset, such as a feat

45、ure, feature relationship, feature attribute, or combination of these. 4.8 population totality of items under consideration ISO 3534-2 EXAMPLE 1 All points in a dataset. EXAMPLE 2 Names of all roads in a certain geographic area. 4.9 reference data data accepted as representing the universe of discou

46、rse, to be used as reference for direct external quality evaluation methods 5 Abbreviated terms ADQR aggregated data quality results AQL acceptance quality limit ISO 3534-2 RMSE root mean square error Copyright American National Standards Institute Provided by IHS under license with ANSINot for Resa

47、leNo reproduction or networking permitted without license from IHS-,-,-ISO 19114:2003(E) ISO 2003 All rights reserved 36 Process for evaluating data quality 6.1 General A quality evaluation process may be used in different phases of a product life cycle, having different objectives in each phase. Th

48、e phases of the life cycle considered here are specification, production, delivery, use and update. Annex B describes some specific dataset-related operations to which quality evaluation procedures are applicable. The process for evaluating data quality is a sequence of steps to produce and report a

49、 data quality result. A quality evaluation process consists of the application of quality evaluation procedures to specific dataset-related operations performed by the dataset producer and the dataset user. Processes for evaluating data quality are applicable to static datasets and to dynamic datasets. Dynamic datasets are datasets that receive updates so frequ