ANSI NEMA C12.21-2006 Protocol Specification for Telephone Modem Communication.pdf

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C12.21-2006 (R2016)Protocol Specification forTelephone Modem Communication 2016 National Electrical Manufacturers Association ANSI C12.21-2006 (R2016) American National Standard for Protocol Specification for Telephone Modem

2、 Communication Secretariat: National Electrical Manufacturers Association Approved August 23, 2016 American National Standards Institute, Inc. ANSI C12.21-2006 (R2016) Page ii 2016 National Electrical Manufacturers Association NOTICE AND DISCLAIMER The information in this publication was considered

3、technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. ANSI standards and guideline

4、 publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While NEMA administers

5、 the process to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and guideline publications. NEMA discl

6、aims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty or wa

7、rranty, expressed or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any individua

8、l manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by any per

9、son or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered

10、 by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this document. NEMA does not certify, test,

11、or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health- or safety-related information in this document shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the stateme

12、nt. ANSI C12.21-2006 (R2016) Page i AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by The American National Standards Institute, Inc. (ANSI) that the requirements for due process, consensus, and other criteria for approval have been met by the standards de

13、veloper. An American National Standard implies a consensus of those substantially concerned with its scope and provisions. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly, and materially affected interests. Subs

14、tantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered and that a concerted effort be made toward their resolution. The existence of an American National Standard does not in any respect preclude anyone,

15、 whether s/he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. It is intended as a guide to aid the manufacturer, the consumer, and the general public. The American National Standards Institute,

16、Inc., does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute, Inc. Req

17、uests for interpretations should be addressed to the secretariat or sponsor whose name appears on this title page. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute, Inc., require that action be taken

18、periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute, Inc. Published by National Electrical Manufacturers Association 1300 North 17thStre

19、et, Suite 900 Rosslyn, Virginia 22209 2016 National Electrical Manufacturers Association All rights, including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan Am

20、erican copyright conventions. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher. Printed in the United States of America ANSI C12.21-2006 (R2016) Page ii 2016 National Electrical Manufacturers

21、Association Foreword (This Foreword is not part of American National Standard C12.21) This standard provides an open-platform communications protocol for two-way communication with a metering device via a telephone modem. The protocol is written to conform to the OSI seven-layer stack. Long-time rea

22、ders of ANSI C12.21 will discover many editing changes to this version of the Standard. The Working Group chose to improve the clarity of the text as an aid to the reader while retaining the normative elements in the manner of previous publications. The 2006 revision of this standard was considered

23、in the context of the so-called “protocol suite” of ANSI standards: C12.18, C12.19, C12.21 and C12.22 (draft). Changes made were included only after assuring that existing devices implementing C12.21 would continue to remain compatible with the 2006 (R2015) revision. It is expected that the logoff s

24、ervice will become mandatory in the next revision of this Standard. Implementers are strongly encouraged to support this service to comply with this change. Suggestions for improvement to this standard are welcome. They should be sent to: National Electrical Manufacturers Association Senior Technica

25、l Director 1300 North 17thStreet Suite 900 Rosslyn, VA 22209 This standard was processed and approved for submittal to ANSI by Accredited Standards Committee for Electricity Metering C12. At the time the committee approved this standard, the C12 Committee had the following members: Tom Nelson, Chair

26、man Paul Orr, Secretary Organization Represented Name of Representative Organization Represented Name of Representative General Interest Elevate Energy L. Kotewa NIST T. Nelson ERCOT EnerNex LLC D. Tucker A. Snyder Power Measurements, LLC W. Hardy Future DOS R e.g., 1.2.840.10066.0., encoded as desc

27、ribed in ISO/IEC 8825-1, Basic Encoding Rules (BER). The last four (4) bytes of this identifier shall be identical to the values delivered in the C12.19 Table elements MANUFACTURER as defined in Table 00 of ANSI C12.19-1997 or the DEVICE_CLASS as defined by Version 2 of ANSI C12.19. := 0DHThe relati

28、ve encoding of the C12.19 Device Class relative to the universal identifier 1.2.840.10066.0, encoded as described in ISO/IEC 8825-1, Basic Encoding Rules (BER). The shall range between to 00Hto 04Hresulting in up to four (4) bytes being transmitted. These four (4) bytes shall be identical to the C12

29、.19 Table elements MANUFACTURER_ID as defined in Table 00 of ANSI C12.19-1997 or the DEVICE_CLASS as defined by Version 2 of ANSI C12.19, with assumed 00Htrailing pad. ANSI C12.21-2006 (R2016) Page 8 2016 National Electrical Manufacturers Association := Length of number of bytes that follow. This va

30、lue shall range between 00Hto 7FH := +Absolute object identifier encoded as described in ISO/IEC 8825-1, Basic Encoding Rules (BER). The size of this field shall not exceed 127 bytes. := +Relative object identifier encoded as described in ISO/IEC 8825-1, Basic Encoding Rules (BER). The size of this

31、field shall not exceed 4 bytes. := 07HAn Identifier that uniquely identifies a C12.19 Device in the application space of the C12.19 Device. This provides for early detection of the device identification element as per IDENTIFICATION of Table 05, DEVICE_IDENT_TBL, or DEVICE_ID found in Table 06 of AN

32、SI C12.19. The C12.19 feature shall be supplied when the C12.19 Device Table 05 or Table 06 are readable immediately following the Logon Service. When C12.19 Device identification is provided it shall not preceded features with codes that are less than 07H. := Length of number of bytes that follow i

33、n . This value shall range between 00Hto 7FH := Provides for disclosure of the C12.19 Device identification. := The character encoding format of the bytes which make up . Its interpretation shall be according to the relevant ANSI C12.19 data model referenced by the C12.19 registered Device Class fea

34、ture . When the feature was not supplied in this response, the value of shall be set to 01H, and shall be encoded according to ISO 7-bit coded character set for information interchange, per ISO/IEC 646 (1991). ANSI C12.21-2006 (R2016) Page 9 2016 National Electrical Manufacturers Association := *The

35、 C12.19 Device identification string encoded and transmitted according to . If the C12.19 Device ID_FORM in Table 00, is set to BCD then the BCD digits shall be transmitted as their text equivalent also encoded as per . For example, assuming that the C12.19 Device GEN_CONFIG_TBL.ID_FORM is BCD and t

36、he Device GEN_CONFIG_TBL.CHAR_FORMAT is ISO 7 bit ASCII, as per ISO/IEC 646 (1991), then the BCD digits 00H01H02H03H0AH04H0DH05H06H07Hshall be transmitted as the character sequence “123-4.567”. The C12.19 application shall logically pad this string with trailing spaces, as needed, to fill the identi

37、fication field width of the C12.19 Device. 4.2.2.4 Read Service The Read Service is identical to that in ANSI C12.18. At least one (1) form of the Read Service is required to be supported by a C12.21 Device. 4.2.2.5 Write Service The Write Service is identical to that in ANSI C12.18. The Write Servi

38、ce is an optional service. 4.2.2.6 Logon Service The Logon Service is identical to that in ANSI C12.18. The Logon Service is a required service. The Logon Service shall be initiated only by a C12.21 Client. 4.2.2.7 Security Service The Security Service is identical to that in ANSI C12.18. The Securi

39、ty Service is an optional service. The Security Service shall be initiated only by a C12.21 Client. 4.2.2.8 Logoff Service The Logoff Service provides for an orderly shutdown of the session established by the Logon Service. The Logoff Service is a required service. ANSI C12.21-2006 (R2016) Page 10 2

40、016 National Electrical Manufacturers Association Request: Following a Logoff Service request, the communication channel will return to the ID State, retaining the parameters previously established. := 52HResponse: The responses , , and indicate a problem with the received Logoff Service request. Th

41、e response indicates the acceptance of the Logoff Service and the cessation of the session established by the Logon Service. Prior to further data transfers with the C12.21 Device, the Logon Service must be reissued. := | | | 4.2.2.9 Authenticate Service The Authenticate Service is used to provide a

42、 two-way authentication with playback rejection during a session. It is recommended that the Authentication Service be used to complement the Security Service, not be used exclusively. The contents of the and fields are a function of the authentication algorithm used. This algorithm is returned by t

43、he Identification Service response. The Authenticate Service is an optional service. Request: := 53H:= number of bytes of the field. := +Information used to authenticate the initiator of this service. Response: The responses , , , and indicate a problem with the received Authenticate Service request

44、. The response indicates the authentication failure of the requester. The response indicates the Authenticate Service was successfully completed and the access permission associated with the field was granted. := | | | | | := Number of bytes of the field. := +Information used to authenticate the rec

45、ipient of this service. ANSI C12.21-2006 (R2016) Page 11 2016 National Electrical Manufacturers Association 4.2.2.10 Negotiate Service The Negotiate Service is identical to that in ANSI C12.18. However, the field of the request shall be ignored because in this standard the data rate is established b

46、y the modem. The Negotiate Service is an optional service. 4.2.2.11 Wait Service The Wait Service is identical to that in ANSI C12.18. The Wait Service is an optional service. 4.2.2.12 Terminate Service The Terminate Service provides for immediate transfer to the Base State. All parameters return to

47、 their default values. The Terminate Service is an optional service. Request: := 21H Response: The responses and indicate a problem with the received Terminate Service request and the channel retains its negotiated settings. The response indicates the Terminate Service request was accepted and the c

48、hannel will return to default settings as stated in Section 4.7.1.2, Variable Settings, upon receipt of a positive acknowledgment. := | | 4.2.2.13 Timing Setup Service The Timing Setup Service provides the mechanism for reconfiguring time-outs, delays and retry attempts from the default values speci

49、fied in this standard. The Timing Setup Service is an optional service. The Timing Setup Service is initiated by the C12.21 Client. Request: := 71H:= Channel traffic time-out in seconds := Inter-character time-out in seconds := Response time-out in seconds ANSI C12.21-2006 (R2016) Page 12 2016 National Electrical Manufacturers Association := Maximum number of retry attempts Response: The responses , , , and indicate a problem with the received Timing Setup Service request and the timer parameters will maintain the