ANSI NEMA C136.23-2012 For Roadway and Area Lighting Equipment C Enclosed Architectural Luminaires.pdf

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C136.23-2012For Roadway and Area Lighting Equipment Enclosed Architectural LuminairesANSI C136.23-2012 Revision of ANSI C136.23-2006 American National Standard For Roadway and Area Lighting Equipment Enclosed Architectural L

2、uminaires Secretariat: National Electrical Manufacturers Association Approved January 15, 2013 Published January 24, 2013 American National Standards Institute, Inc. ANSI C136.23-2012 Page ii Copyright 2012 by National Electrical Manufacturers Association NOTICE AND DISCLAIMER The information in thi

3、s publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document.

4、 American National Standards Institute (ANSI) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an inte

5、rest in the topic covered by this publication. While NEMA administers the process and establishes rules to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the s

6、oundness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, us

7、e of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular

8、 purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on be

9、half of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasona

10、ble care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to polic

11、e or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safetyrelated information in this document shall not be attribu

12、table to NEMA and is solely the responsibility of the certifier or maker of the statement. ANSI C136.23-2012 Page iii Copyright 2012 by National Electrical Manufacturers Association AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by ANSI. ANSI states that t

13、he requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantia

14、l agreement means significantly more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not

15、 in any respect preclude anyone, whether they have approved the standards or not, from: manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards, and will under no circumsta

16、nces give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the secretari

17、at or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this st

18、andard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published by National Electrical Manufacturers Association 1300 North 17th Street, Rosslyn, VA 22209 g164 Copyright 2012 by National Ele

19、ctrical Manufacturers Association All rights reserved including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventions. No part of this p

20、ublication may be reproduced in any form, in an electronic retrieval system or otherw ise, and w ithout the prior w ritten permission of the publisher. Printed in the United States of America. ANSI C136.23-2012 Page iv Copyright 2012 by National Electrical Manufacturers Association ANSI C136.23-2012

21、 Page v Copyright 2012 by National Electrical Manufacturers Association TABLE OF CONTENTS FORWARDiii 1 SCOPE . 1 2 NORMATIVE REFERENCES . 1 3 INFORMATIVE REFERENCES 3 4 GENERAL REQUIREMENTS . 3 4.1 Basic Insulation Test (BIL) . 3 4.2 Surge Test Waveforms. 34.3 Vibration Requirements . 35 VOLTAGE CLA

22、SSIFICATION 36 MOUNTING PROVISIONS 3 7 TERMINAL BLOCKS 48 WIRING. 4 9 LATCHING AND HINGING . 4 10 LAMP SOCKET / OPTICAL ASSEMBLY ELECTRICAL CONNECTOR 4 10.1 HID Lamps 4 10.2 Fluorescent Lamps 410.3 Low-pressure Sodium Lamps . 410.4 Induction Lamps 410.5 SSLs . 411 REFRACTOR OR LENS REPLACEMENT 4 12

23、OPTICAL ASSEMBLY 5 13 LIGHT DISTRIBUTION AND PHOTOMETRIC DATA 5 14 BALLAST / HF GENERATOR / SSL DRIVER 5 15 STARTER . 5 16 GROUNDING . 5 17 BARRIERS . 5 18 PHOTOCONTROLS 5 19 MATERIALS AND PROTECTIVE COATINGS 5 20 LABELING . 6 21 EXTERNAL IDENTIFICATION OF LIGHT SOURCE SIZE AND TYPE 6 ANSI C136.23-2

24、012 Page vi Copyright 2012 by National Electrical Manufacturers Association FOREWORD At the time this standard was approved the ANSI C136 committee was composed of the following members: Acuity Brands Lighting Alabama Power Company American Electric Lighting Ceravision City of Kansas City, Missouri

25、Cooper Lighting Duke Energy Edison Electric Institute EPRI Florida Power and Light FRE Composites (2005) Inc. GE Lighting Solutions Georgia Power Company Gulf Power Company Hapco Holophane, An Acuity Brands Company Hubbell Lighting, Inc. Intelligent Illuminations Inc. Kauffman Consulting, LLC Lites

26、Los Angeles City Bureau of Street Lighting National Grid Philips Hadco Philips Lumec PNNL Progress Energy Puget Sound Energy Shakespeare Composite Structures South Carolina Electric & Gas SouthConn Technologies, Inc. StressCrete Group Sunrise Technologies, Inc., FP OLC TE Connectivity Utility Metals

27、 Division of Fabricated Metals, LLC Valmont Industries, Inc. Vamas Engineering and Consultants Vandal Shields Xcel Energy ANSI C136.23-2012 Page 1 Copyright 2012 by National Electrical Manufacturers Association 1 SCOPE This standard is intended to cover physical, operating, maintenance, and light di

28、stribution features that permit use of architectural luminaires in roadway applications when so specified. The architectural luminaires covered by this standard include side-mounted, square, rectangular, cylindrical, spherical, and other types of decorative or nostalgic historical style luminaires t

29、hat are considered to be any significant deviation from the luminaire style that has evolved in the industry as predominantly (commonly) known as the cobra head style covered in ANSI C136.14. It is not intended that compliance with this standard will permit interchangeability with existing roadway e

30、quipment without thorough engineering review and evaluation. Structural requirements for poles and brackets shall be evaluated with respect to both strength and vibration. Vibration dampers may be required. Where specified, architectural luminaires of similar effective projected area and weight meet

31、ing the requirements of this standard based on appropriate engineering review and evaluation may be used in roadway applications with the assurance that: a) They will fit the standard roadway mounting devices and methods b) Light distribution patterns and photometric data available from manufacturer

32、s will be consistent with standard roadway luminaires as specified in IES standards. c) Physical, operational, and maintenance characteristics will be similar to standard roadway luminaires. 2 NORMATIVE REFERENCES This standard incorporates by reference provisions from other publications. These norm

33、ative references are cited at the appropriate places in the text, and the publications are listed below. For undated references, the latest edition of the publication referred to applies (including amendments). ANSI/ANSLG C78.40-2011 American National Standard Electric Lamps: Specifications for Merc

34、ury Lamps ANSI_ANSLG C81.61-2009 American National Standard for Electrical Lamp Bases. ANSI_ANSLG C82.1-2004 American National Standard Specifications for Fluorescent Ballasts (including supplements). ANSI_ANSLG C82.4-2002 American National Standard for BallastsHigh-intensity Discharge and Low-press

35、ure Sodium Lamps (Multiple-supply type) ANSI_ANSLG C82.9-2010 American National Standard for High-intensity Discharge and Low-pressure Sodium Lamps, Ballasts, and TransformersDefinitions ANSI C136.10-2010 American National Standard for Roadway Lighting EquipmentLocking-type Photocontrol Devices and

36、Mating Receptacle Physical and Electrical Interchangeability and Testing ANSI C136.11-2011 American National Standard for Roadway Lighting EquipmentMultiple (Parallel Wired) Sockets ANSI C136.13 (R2009) American National Standard for Roadway LightingMetal Brackets for Wood Poles ANSI C136.23-2012 Pa

37、ge 2 Copyright 2012 by National Electrical Manufacturers Association ANSI C136.15-2009 American National Standard for Roadway Lighting EquipmentHigh-intensity Discharge and Low-pressure Sodium Lamps in LuminairesField Identification ANSI C136.19-2011 American National Standard for Roadway Lighting E

38、quipmentHigh-pressure Sodium Lamps and Retrofit High-pressure Sodium Lamps for Mercury BallastsGuide for Selection ANSI C136.2 (R2009) American National Standard for Roadway and Area Lighting EquipmentLuminaire Voltage Classifications ANSI C136.21 (R2009) American National Standard for Roadway Light

39、ingVertical Tenons Used with Post-top-mounted Luminaires ANSI C136.22 (R2009) American National Standard for Roadway Lighting EquipmentInternal Labeling of Luminaires ANSI C136.24 (R2010) American National Standard for Roadway Lighting EquipmentNon-locking Type (Button) Photocontrols ANSI C136.25-20

40、09 American National Standard for Roadway Lighting EquipmentIngress Protection (Resistance to Dust, Solid Objects and Moisture) for Luminaire Enclosures ANSI C136.28-2006 (R2011) American National Standard for Roadway Lighting EquipmentGlass Lenses Used in Luminaires ANSI C136.3 (R2009) American Nat

41、ional Standard for Roadway Lighting EquipmentLuminaire Attachments ANSI C136.31-2010 American National Standard for Roadway and Area Lighting EquipmentLuminaire Vibration. ANSI C136.37-2011 American National Standard for Roadway and Area Lighting EquipmentSolid State Lighting Sources. ANSI C136.38-

42、2009 American National Standard for Roadway and Area Lighting EquipmentInduction Lighting. ANSI C136.40-2011 American National Standard for Roadway and Area Lighting EquipmentSolar Lighting Systems ANSI/IESNA LM-79-2008 Electrical and Photometric Measurements of Solid-State Lighting Products ANSI/IE

43、SNA RP 8-00 (R2005) American National Standard Practice for Roadway Lighting ASTM A53/A53M-12 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless IES TM-15-2007 Luminaire Classification System for Outdoor Luminaires IES TM-15 Addendum Backlight, Uplight and

44、 Glare (BUG) Ratings IES LM-80-2008 Measuring Lumen Maintenance of LED Light Sources ANSI C136.23-2012 Page 3 Copyright 2012 by National Electrical Manufacturers Association 3 INFORMATIVE REFERENCES This standard is intended to be used in conjunction with the following publications. The latest editi

45、on of the publication applies (including amendments). ANSI/IESNA RP-16-2010 Nomenclature and Definitions for Illuminating Engineering IEEE Standards Dictionary: Glossary of Terms & Definitions 2009 NEMA 250-2008 Enclosures for Electrical Equipment (1000 Volts Maximum) UL 8750-2010 Light Emitting Dio

46、de (LED) Light Sources for Use in Lighting Products 4 GENERAL REQUIREMENTS 4.1 Basic Insulation Test (BIL) Luminaires must meet basic insulation test and withstand requirements of the 600 V classification as defined in ANSI C136.2 or as specified by the user. It is essential the test be conducted wi

47、th a shorting cap in place of the photocontrol (should the fixture be equipped with a photocontrol receptacle). The shorting cap used for the test shall have no surge protection. 4.2 Surge Test Waveforms The luminaire shall be protected from damage or consequential damage for surge-test waveforms as

48、 specified in ANSI C136.2. 4.3 Vibration Requirements Luminaire shall meet the vibration requirements of ANSI C136.31 as specified by the user. 5 VOLTAGE CLASSIFICATION The luminaire shall be of the 600 V classification as defined in ANSI C136.2. 6 MOUNTING PROVISIONS Luminaires meeting the requirem

49、ents of this standard shall: a) Accept a straight tubular section of 1-1/4 in NPS pipe tenon (1.660 in (4.22 cm) outside diameter) not more than 7.5 in (19 cm) long or a 2 in NPS pipe tenon (2.375 in (6.03 cm) outside diameter) not more than 10 in (25.4 cm) long in accordance with table 2 of ANSI C136.3 and clause 6 of ANSI C136.13. b) Provide a shoulder or stop to limit the depth of insertion of the pipe tenon during installation. c) Permit leveling through no less than g114 3 degrees from the horizontal axis of the attachment