ANSI NEMA C136.34-2014 Roadway and Area Lighting Equipment-Vandal Shields for Roadway and Area Lighting Luminaires.pdf

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C136.34-2014Roadway and AreaLighting Equipment-Vandal Shields for Roadway and Area Lighting LuminairesANSI C136.34-2014 Revision of ANSI C136.34-2004 (R2009) American National Standard for Roadway and Area Lighting Equipment

2、 Vandal Shields for Roadway and Area Lighting Luminaires Secretariat: National Electrical Manufacturers Association Approved September 30, 2014 American National Standards Institute 2014 National Electrical Manufacturers Association NOTICE AND DISCLAIMER The information in this publication was consi

3、dered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. American National Stan

4、dards Institute (ANSI) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic cover

5、ed by this publication. While NEMA administers the process to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its st

6、andards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this docume

7、nt. NEMA disclaims and makes no guaranty or warranty, expressed or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake

8、 to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA u

9、ndertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Inform

10、ation and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents o

11、f this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safetyrelated information in this document shall not be attributable to NEMA and is solely the responsibil

12、ity of the certifier or maker of the statement. ANSI C136.34-2014 2014 National Electrical Manufacturers Association i AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval

13、have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unan

14、imity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standard or not, fr

15、om manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall

16、have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This

17、 American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of approval. Purchasers of American National Standards m

18、ay receive current information on all standards by calling or writing the American National Standards Institute. Published by National Electrical Manufacturers Association 1300 North 17th Street, Suite 900, Rosslyn, Virginia 22209 2014 National Electrical Manufacturers Association. All rights, inclu

19、ding translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American copyright conventions. No part of this publication may be reproduced in any form, in an electronic

20、retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America ANSI C136.34-2014 ii 2014 National Electrical Manufacturers Association Foreword At the time this standard was approved, the ANSI C136 committee was composed of the following

21、 members: Alabama Power Company JEA American Electric Lighting Kauffman Consulting, LLC Caltrans LED Roadway Lighting Ltd. Ceravision LITES City of Kansas City, Missouri LUXIM Corp. City of Los Angeles, Bureau of Street Lighting Mississippi Power Cree, Inc. National Grid Duke Energy OSRAM SYLVANIA I

22、nc./Encelium Duke Energy Florida Philips Eatons Cooper Lighting Business Philips Lumec Edison Electric Institute PNNL-Battelle EPRI ROAM/DTL EYE Lighting International of N.A., Inc. SELC Lighting Florida Power b) the level of protection in Clauses 8.1 or 8.2; c) the shield protects the photocontrol;

23、 d) the shield provides protection from horizontal projectiles to the luminaire optical assembly, ballast compartment, photocontrol, or all three; e) the shield is intended for use on luminaires mounted where handheld baseball bats (or similar) are a typical impact source. The manufacturer shall sta

24、te in the literature and on the shield or on the shield packaging the minimum mounting distance from a specific type and wattage of luminaire. Example: “This shield must not be mounted closer than 3 in. (76 mm) to a 175W mercury lamp.” 8.5 Maximum Operating Temperature If the temperature affects the

25、 shields performance, the manufacturer shall state in the literature and on the shield or shield packaging the minimum or maximum temperature at which the performance in Clauses 8.1 and 8.2 applies. 8.6 Expected Life Manufacturers shall state in the literature and on the shield or shield packaging t

26、he expected useful life of the shield when the shield is not subjected to projectile impact. 9 Luminaire Performance Alteration 9.1 Optical Performance Shields alter photometric distributions of luminaires and will reduce light output. There may be up to a 30% reduction of light output. Trapped sand

27、, dust, vermin, bird nesting materials, or imbedded projectiles may further reduce light output. In critical areas, the user must understand the implications of reduced light output and the need for routine cleaning and other maintenance. Damaged shields should be replaced on a timely basis. 9.2 Air

28、flow When properly installed according to the manufacturers instructions, the shield shall not inhibit airflow needed for luminaire cooling nor cause the luminaire to exceed its maximum temperature ratings. 10 Weight and Wind Factors 10.1 Installation Weight The weight of the shield shall be stated

29、in the literature and on the shield or shield packaging. Weight of the installed shield and luminaire should not exceed the weight rating of the pole, mast arm, and luminaire-mounting hardware. ANSI C136.34-2014 2014 National Electrical Manufacturers Association 5 10.2 Wind Resistance The manufactur

30、er shall provide effective projected area (EPA) factors for the installed shield. 11 Failure The shield is considered to have failed when: a) It no longer provides claimed minimum protection for the luminaire. b) It emits secondary projectiles when impacted. c) It reduces the shield/luminaire system

31、s lumen output below the acceptable design minimum. d) It poses a falling part hazard to people and objects below. 12 Product Marking 12.1 Identification The shield shall have a permanent label or other marking that has the following as a minimum: a) manufacturers name and catalog number; b) month a

32、nd year of manufacture, and c) the level of protection from Clauses 8.1 and 8.2. 12.2 Performance Reduction Packaging and/or field instructions shall have a note that the use of the shield will alter the light pattern and reduce lumen output of the luminaire. NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB