ANSI NEMA C136.4-2003 For Roadway and Area Lighting Equipment-Series Sockets and Series-Socket Receptacles ( BEST AVAILABLE COPY ).pdf

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C136.4-2003 (R2013)American National Standard For Roadway and Area Lighting EquipmentSeries Sockets and Series-Socket ReceptaclesANSI C136.4-2003 (R2013) American National Standard For Roadway and Area Lighting Equipment Ser

2、ies Sockets and Series-Socket Receptacles Secretariat: National Electrical Manufacturers Association Approved August 28, 2013 Published November 15, 2013 American National Standards Institute, Inc. ANSI C136.4-2003 (R2013) NOTICE AND DISCLAIMER The information in this publication was considered tech

3、nically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. American National Standards Inst

4、itute (ANSI) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this

5、 publication. While NEMA administers the process and establishes rules to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contain

6、ed in its standards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on

7、 this document. NEMA disclaims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not

8、 undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor

9、 is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstanc

10、es. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the

11、contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safetyrelated information in this document shall not be attributable to NEMA and is solely the r

12、esponsibility of the certifier or maker of the statement. ANSI C136.4-2003 (R2013) i AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by ANSI. ANSI states that the requirements for due process, consensus, and other criteria for approval have been met by the

13、standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means significantly more than a simple majority, but not necessarily unanimity. Conse

14、nsus requires that all views and objections be considered, and a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether they have approved the standards or not, from: manufactu

15、ring, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards, and will under no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the

16、 right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This America

17、n National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standard

18、s by calling or writing the American National Standards Institute. Published by National Electrical Manufacturers Association 1300 North 17th Street, Rosslyn, VA 22209 Copyright 20XX by National Electrical Manufacturers Association All rights reserved including translation into other languages, rese

19、rved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventions. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, and without

20、the prior written permission of the publisher. Printed in the United States of America. ANSI C136.4-2003 (R2013) ii This page intentionally left blank. ANSI C136.4-2003 (R2013) 1 CONTENTS 1 Scope 1 2 Normative references 1 3 Informative references 1 4 Voltage classification . 1 5 General . 2 6 Serie

21、s sockets . 2 7 Receptacles 3 8 Tests 3 ANSI C136.4-2003 (R2013) 2 FOREWORD At the time this standard was approved the ANSI C136 committee was composed of the following members: Alabama Power LITES American Electric Lighting National Grid Caltrans OSRAM SYLVANIA Inc. Ceravision Philips HADCO City of

22、 Kansas City, Missouri Philips Lumec City of Los Angeles, Bureau of Street Lighting PNNL Duke Energy ROAM/DTL Duke Energy - Florida SELC Lighting Eatons Cooper Lighting Shakespeare Composite Structures Edison Electric Institute South Carolina Electric & Gas EPRI SouthConn Technologies, Inc. EYE Ligh

23、ting International of N.A., Inc. StressCrete Ltd/King Luminaire Co., Inc. Florida Power and Light Sunrise Technologies, Inc./FP Outdoor Lighting Controls FRE Composites (2005) Inc. TE Connectivity GE Lighting Toshiba International Corporation Georgia Power Company Utility Metals Division of Fabricat

24、ed Metals, LLC Gulf Power Company Valmont Structures Hapco Vamas Engineering and Consultants Hapco Aluminum Pole Products Vandal Shields Holophane An Acuity Brands Company Xcel Energy Hubbell Lighting, Inc. Inovus Solar Intelligent Illuminations Inc. Kauffman Consulting, LLC LED Roadway Lighting ANS

25、I C136.4-2003 (R2013) 3 1 SCOPE This standard covers the following equipment for roadway and area luminaries: a) Series sockets having medium impact strength and intended for service at high temperatures. b) Series sockets having high impact strength and intended for service at limited temperatures.

26、 c) Series-socket receptacles (here in-after called the receptacles) in the 5000 V classification. 2 NORMATIVE REFERENCES This standard shall be used in conjunction with the following publications. When these standards are superseded by an approved revision, the revision shall apply. ANSI C136.2-199

27、6, American National Standard for Roadway and Area LightingLuminairesVoltage Classification. 3 INFORMATIVE REFERENCES This standard shall be used in conjunction with the following publications. When these standards are superseded by an approved revision, the revision shall apply. ANSI C136.1-1991 (R

28、1996), American National Standard for Roadway and Area LightingFilament LampsGuide for Selection. ANSI C136.5-1989 (R1995), American National Standard for Roadway and Area LightingFilm Cutouts. ANSI C136.6-1997, American National Standard for Roadway and Area LightingMetal Heads and Reflector Assemb

29、liesMechanical and Optical Interchangeability. NOTE ANSI Standards are available from Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112-5776 Phone: 303/397-7956, Fax 303/397-2740, e-mail: or . 4 VOLTAGE CLASSIFICATION The voltage classification shall be in accordance with ANS

30、I C136.2. 5 GENERAL 5.1 Clearances and fitting dimensions for series sockets Clearances and fitting dimensions for series sockets shall be in accordance with Figure 1. 5.2 Clearances and fitting dimensions for receptacles Clearances and fitting dimensions for receptacles shall be in accordance with

31、Figure 2. 5.3 Dimensions for series-socket and receptacle bodies Dimensions for series-socket and receptacle bodies shall be in accordance with the standard practice of the manufacturer and are shown in outline form only in Figures 1 and 2. 5.4 Current-carrying parts Current-carrying parts of series

32、 sockets and receptacles shall be capable of carrying 20 A continuously. ANSI C136.4-2003 (R2013) 4 5.5 Metal parts All metal parts of series sockets and receptacles shall be suitable for continuous operation at 392 F (200 C). 6 SERIES SOCKETS 6.1 Features Series sockets shall be provided with the f

33、ollowing: a) A lamp-base grip to maintain contact pressure by countering normal conditions of vibration. This grip shall not interfere with the normal insertion or removal of a lamp. b) A bumper pad of a material that will withstand a continuous operating temperature of 392 F (200 C) without disinte

34、gration, located as shown in Figure 1. c) A short-circuiting device operated by screwing in the lamp (optional). 6.2 Socket body classification Series socket bodies shall be classified as follows: a) Medium impact strength, high temperature, the impact strength to be determined by section 8. b) High

35、 impact strength, limited temperature, the impact strength to be determined in accordance with section 8. 6.3 Socket body operating temperatures 6.3.1 Medium impact strength, high temperature series sockets Series sockets having medium impact strength, high-temperature bodies shall withstand a conti

36、nuous operating temperature of 392 F (200 C). (These are for general use.) 6.3.2 High impact strength, limited temperature series sockets Series sockets having high impact strength, limited temperature bodies shall withstand a continuous operating temperature of 302 F (150 C). (These are primarily f

37、or use with open-type luminaries, with lamps of 200 W or less.) 7 RECEPTACLES 7.1 Body The receptacle body shall be of wet-process porcelain or equivalent. 7.2 Conditions of operation The conditions described in sections 5.4 and 5.5 shall apply whether or not the series socket is in the receptacle.

38、7.3 Temperature The receptacle shall be capable of withstanding a continuous operating temperature of 392 F (200 C). ANSI C136.4-2003 (R2013) 5 7.4 Tension The receptacle contact spring tension shall be such that a load of 15-25 lbs (6.8-11.34 kg) will be required to pull from the receptacle a socke

39、t having a 5/64 in (1.98 mm) space between faces of the socket prongs. 8 TESTS 8.1 Impact strength rating Series-socket bodies shall be tested for their impact strength rating with the testing machine shown in Figure 3. 8.2 Medium impact strength rating Series-socket bodies having a medium impact st

40、rength rating shall withstand an impact of 3.5 inoz (0.0247 J) a 1 in (25.4 mm) steel ball dropped 1 in (38.1 mm). 8.3 High impact strength rating Series-socket bodies having a high impact strength rating shall withstand an impact of 0.671 J (95 inoz) a 1 in (38.1 mm) steel ball dropped from 12 in (

41、304.8 mm). 8.4 Voltage tests The receptacle shall withstand the dry flashover voltage test established for the 500 V classification in ANSI C136.2. Voltage tests shall be made with the mounting plate and screws in place on the receptacle and shall be made between these and the current-carrying parts of the receptacle. NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB